http://defect.opensolaris.org/bz/show_bug.cgi?id=5305
Summary: RC2-Services Administration Tool does not display
correct state of network acitivity
Classification: Development
Product: nwam
Version: unspecified
Platform: i86pc/i386
OS/Version: OpenSolaris
Status: NEW
Severity: minor
Priority: P4
Component: GUI
AssignedTo: nwam-dev at opensolaris.org
ReportedBy: virginia.wray at sun.com
QAContact: nwam-dev at opensolaris.org
I'm testing RC2 and have seen this behavior on two different systems, a Lenovo
T61 and an HP Compaq 6910p. The tool interface for smf shows that both nwam and
the physical network are active. To bring up the tool go to System ->
Administration -> Services. The boxes for physical network interface
autoconfiguration (network/physical:nwam) and physical network interfaces
(network/physical) are both checked. Looking at the command line output for the
two services it shows nwam active and physical:default disabled.
#svcs -a |grep physical
disabled 7:15:04 svc:/network/physical:default
enabled 7:48:18 svc:/network/physical:nwam
This appears to me to be a discrepancy. This may be an smf issue, but I'm
filing it under nwam because there were no discrepancies in any of the other
services I checked. The command line output (disabled/enabled) was correctly
displayed in the tool.
--
Configure bugmail: http://defect.opensolaris.org/bz/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug.
You are the assignee for the bug.
