Both nwam and physical:default cannot be running at once. Either one must be disabled before the other can run. Check the "mutual exclusivity" section 8.4 in the specs.
Anurag Lizhong Li wrote: > I reboot the machine, then got the following error: > > Rebooting with command: boot > Boot device: > /pci at 1e,600000/pci at 0/pci at a/pci at 0/pci at 8/scsi at 1/disk at > 0,0:a File and > args: > SunOS Release 5.11 Version nwam1-build:2008-12-16 64-bit > Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved. > Use is subject to license terms. > DEBUG enabled > misc/forthdebug (510828 bytes) loaded > Hardware watchdog enabled > Dec 17 18:35:17 svc.startd[100004]: svc:/network/physical:default: > Method "/lib/svc/method/net-physical" failed with exit status 96. > Dec 17 18:35:17 svc.startd[100004]: svc:/network/physical:nwam: > Method "/lib/svc/method/net-nwam start" failed with exit status 96. > Dec 17 18:35:17 svc.startd[100004]: network/physical:default > misconfigured: transitioned to maintenance (see 'svcs -xv' for details) > Dec 17 18:35:17 svc.startd[100004]: network/physical:nwam > misconfigured: transitioned to maintenance (see 'svcs -xv' for details) > Hostname: firering > NIS domain name is opg.PRC.Sun.COM > > Then I found the log in file /var/svc/log/network-physical:nwam.log like > this "svc:/network/physical:nwam and svc:/network/physical:defaut > shouldn't enabled at the same time". > So I disable the svc:/network/physical:defaut, > after reboot, the svc:/network/physical:nwam is online now. > > Anurag S. Maskey wrote: > >> svc:/network/netcfg:default needs to be running if nwamcfg is to be >> used. This is very new from the latest build. svc:/network/physical:nwam >> depends on network/netcfg. >> >> The manifest for network/netcfg is "enabled" by default, so I am >> surprised why it didn't start on boot. I did experience this same thing >> after a BFU and reboot. When I reboot again (2nd time), netcfg started >> by default. >> >> Anyone else the same behavior after rebooting from the bfu# prompt? >> >> Anurag >> >> >> Lizhong Li wrote: >> >> >>> Anurag, >>> >>> I got the following error : >>> >>> nwamcfg> create ncp myncp1 >>> Create ncp error: could not bind to backend server >>> >>> firering:exp# uname -a >>> SunOS firering 5.11 nwam1-build:2008-12-16 sun4u sparc >>> SUNW,Sun-Fire-V215 >>> >>> Did I miss something ? >>> >>> >>> >>> >> _______________________________________________ >> nwam-dev mailing list >> nwam-dev at opensolaris.org >> http://mail.opensolaris.org/mailman/listinfo/nwam-dev >> >> > >
