http://defect.opensolaris.org/bz/show_bug.cgi?id=12177
Summary: [RC4] moving interfaces between groups can lead to
interfcaes being listed
Classification: Development
Product: nwam
Version: RC4
Platform: ANY/Generic
OS/Version: All
Status: NEW
Severity: major
Priority: P2
Component: GUI
AssignedTo: nwam-dev at opensolaris.org
ReportedBy: robert.kinsella at sun.com
QAContact: nwam-dev at opensolaris.org
--- Comment #0 from Robert Kinsella <robert.kinsella at sun.com> 2009-10-22
11:22:47 UTC ---
Created an attachment (id=2872)
tar archive
also see 12146 and 12084
System configured nge0, hme0, hme1, hme2, hme3
Only hme0 and nge0 are connected.
Move hme1,2,3, into always disable these connections
group nge0 and hme0 in then enable all of these connections.
Testcase1 start
1. launch nwam-manager-properties.
2. move hme0 into always disable these connections
3. select ok
- result hme0 is move to disabled and goes offline
testcase2 start
1. launch nwam-manager-properties.
2. move hme0 interface into
'then enable all of these connections'
- select ok
re-launc nwam-manager-properties.
expected result
both hme0 and nge0 are listed as online in connection status
actual result
nothing is listed in connection status
ifconfig -a shows nge0 configured, nothing is listed for hme0
nwamadm list -x
ncu:phys nge0 online interface/link is up
ncu:ip nge0 online interface/link is up
ncu:phys hme0 disabled disabled by administrator
ncu:ip hme0 disabled disabled by administrator
show network profile
lists oth nge0 and hme0 in
'then enable all of these connections'
log files attached
--
Configure bugmail: http://defect.opensolaris.org/bz/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug.
You are the assignee for the bug.
