http://defect.opensolaris.org/bz/show_bug.cgi?id=12608
Summary: [rc5] all interfaces unavailable after restoring
interfaces from always disable these connections
Classification: Development
Product: nwam
Version: RC5
Platform: ANY/Generic
OS/Version: All
Status: NEW
Severity: normal
Priority: P3
Component: GUI
AssignedTo: nwam-dev at opensolaris.org
ReportedBy: robert.kinsella at sun.com
QAContact: nwam-dev at opensolaris.org
--- Comment #0 from Robert Kinsella <robert.kinsella at sun.com> 2009-11-11
13:47:44 UTC ---
Created an attachment (id=2990)
zip archive
with automatic profile active
1. launch nwam-manager-properties
2. select active profile user, select ok
3. launch nwam-manager-properties
all interfaces are currently listed in priority group
"then enable one or more of these connections"
- only hme0 and hme1 are connected.
(ncp-User-all-active.txt attached).
4. Move hme0 and hme1 to
always disable these connections
select ok
(ncp-User-hme01-moved-to-disable.txt attached)
both hme0 and hme1 are now listed as network unavailable.
5. relaunch nwam-manager-properties
move hme0 and hme1 back into
"then enable one or more of these connections"
select ok
expected result
hme0 and hme1 should become active
actual result
hmeo and hme1 are still listed as network unavailable
(ncp-User-hme01-moved-up-one-group.txt attached)
--
Similar results are seen if user just moves one interface to
always disable these connections and back to then enable one or more of these
connections, i.e. the interface remains in state netowrk unavailable.
workaround
move interface(s) to 'always enable these connections' - interface becomes
active.
- select ok
relaunch nwam-manager-properties and move back down to
then enable one or more of these connections.the connections(s) are then active
--
Configure bugmail: http://defect.opensolaris.org/bz/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug.
You are the assignee for the bug.
