documentation states that it will repeat to WAP11 only. Anyone try it with a BEFW11S4 ?
http://www.linksys.com/download/vertxt/wap11v26_fw_ver.TXT <snip> Last Firmware Version: 1.07 Version v1.07, April 16, 2003 - Add AP Repeater mode. Customer can set this unit as a wireless repeater to another WAP11(only). <end snip> ----- Original Message ----- From: "Bruce Ehlers" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, June 27, 2003 2:30 PM Subject: [nycwireless] Repeater? > I have a Linksys BEFW11S4 with a Linksys signal booster and a 8db gain omni > antenna mounted in my window. I have a new SMC 200mw card SMC2532W-B on my > notebook. > > There is a tree between my boat and the house that has foliage but is not > too thick. My boat is approximately 300 yards from the house. I can get > signal on the boat with line of sight but as soon as I go below where the > table is, I loose the signal. All that is added between me and the Linksys, > when I go below, is fiberglass. > > Is there any way I can configure this so I can have signal below? Maybe a > repeater on the back of the boat? I have electricity on the boat, so that's > not a problem. Will the Linksys WAP11 work as a repeater and if so how > would I configure it? Or what else can I do to be able to use the PC below > deck? > > ================================= > Bruce Ehlers > [EMAIL PROTECTED] > > > -- > NYCwireless - http://www.nycwireless.net/ > Un/Subscribe: http://lists.nycwireless.net/mailman/listinfo/nycwireless/ > Archives: http://lists.nycwireless.net/pipermail/nycwireless/ > -- NYCwireless - http://www.nycwireless.net/ Un/Subscribe: http://lists.nycwireless.net/mailman/listinfo/nycwireless/ Archives: http://lists.nycwireless.net/pipermail/nycwireless/
