Hello Webmaster,
You don't state which other AP you have besides the DLink
DWL-900AP+? I ran into a "minor" bug (a few months ago, note sarcasm) that
when I did a repeat off a DLink DI-614+ with a 900AP+, the wireless clients
off the 900 and 614 cannot communicate (ping) when WEP was enabled. I could
ping the gateway, so I spoke with DLink Support and they acknowledged the
"bug" and suggested disabling WEP and enabling MAC Address Lists (not an
option in the deployment I could do). I simply replaced the 614+ with a
900AP+ and then repeating of WEP enabled wireless worked with all clients
being able to communicate with other clients.
Cable Modem --> 614+ - clients
900AP+ (repeating mode) - clients
Hope this helps...
-Ben
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, July 12, 2003 6:46 PM
Subject: [nycwireless] file sharing
> Hi,
>
> I'm trying to file share between two Windows 98 machines, but none of my
> machines seem to be able to see each other.
>
> set up is like this:
> cable modem -> router -> access point ->win98 laptop
> ->Dlink dwl-900AP->hub->win98
> ->red hat 8
>
> I do a ping -b from the linux box and only get a reply from the router.
> Why can't I see the other computers?
>
>
>
>
>
>
> --
> NYCwireless - http://www.nycwireless.net/
> Un/Subscribe: http://lists.nycwireless.net/mailman/listinfo/nycwireless/
> Archives: http://lists.nycwireless.net/pipermail/nycwireless/
--
NYCwireless - http://www.nycwireless.net/
Un/Subscribe: http://lists.nycwireless.net/mailman/listinfo/nycwireless/
Archives: http://lists.nycwireless.net/pipermail/nycwireless/
