try this to see if it has any effect: Go into Services (Start->Programs->Administrative Tools->Services) and turn off Wireless Zero Configuration ... see if it has any effect as its known to conflict w/ other client apps like Orinoco Client Manager and such.
- jon ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, November 02, 2003 11:28 PM Subject: [nycwireless] SMC2532W-B + XP + NS won't work. Help! Weird problem. > Well this is what happens. > First I installed the SMC2532W-B card. I put in my > wireless settings into that utility origran that comes > with the card. Once that worked with no problems I > installed the new Netstumbler. That is when hell broke > loose. First: Netstumbler replaced some file that SMC > utility installs. So even if netstumbler was off, card > would not lock onto any AP and keep on locking on and > off every second non-stop. When you do scanning with > Netstumbler, it only sees the AP that you supposed to > lock on to and it also does that on/off action. > I have to remove Netstumbler and re-install the card > to have my wireless work again. > How can I get that fixed so Netstumbler works with my SMC? > -- > NYCwireless - http://www.nycwireless.net/ > Un/Subscribe: http://lists.nycwireless.net/mailman/listinfo/nycwireless/ > Archives: http://lists.nycwireless.net/pipermail/nycwireless/ > -- NYCwireless - http://www.nycwireless.net/ Un/Subscribe: http://lists.nycwireless.net/mailman/listinfo/nycwireless/ Archives: http://lists.nycwireless.net/pipermail/nycwireless/
