I thought perhaps the problem was that pebble is designed to output to serial rather than graphics, so perhaps if I get a old 9pin serial port on the machine I can test my theory.
Barry -----Original Message----- From: Michael Stearne [mailto:[EMAIL PROTECTED] Sent: Saturday, 22 May 2004 4:40 a.m. To: Barry Murphy Cc: [EMAIL PROTECTED] Subject: Re: [nycwireless] Pebble on old pc and high load averages 1.00 1.00 0.99 On May 20, 2004, at 9:54 PM, Barry Murphy wrote: > Hi, > > I have pebble running on 3 soekris net4521 machines for wireless > nodes, however when dameontools is running it seems that I have 100% > cpu usage, so if anyone has run into this problem before please let me > know. > > Secondly, I have 3 x P100 and 1 x P200 machines lieing around. I have > purchased a couple of CF -> IDE adaptors to shove in the machines and > tried to boot pebble. It gets as far as Uncompressing Linux... Ok, > booting the kernal. No Further. > > How can I get pebble to run on a old pc ? > I've had this problem with Pebble also. The Num Lock and Scroll Lock lights just blink. I've tried it on a newer dual processor machine but also on an old Pentium 100. I haven't had time to play around with it but should be getting back to it. For the list: Are there any recommended hardware configurations for Pebble? Thanks, Michael -- NYCwireless - http://www.nycwireless.net/ Un/Subscribe: http://lists.nycwireless.net/mailman/listinfo/nycwireless/ Archives: http://lists.nycwireless.net/pipermail/nycwireless/
