The question is: Does the IBM Verify Authorization Server properly implement Section 4.1.2.1. Authorization Error Response per the OAuth standard, or does the OpenID Connect specification supersede the OAuth 2.0 IETF standard?
Best regards, Don Donald F. Coffin Founder/CTO REMI Networks 2335 Dunwoody Crossing Suite E Dunwoody, GA 30338-8221 From: Warren Parad <[email protected]> Sent: Thursday, August 6, 2026 12:44 PM To: [email protected] Cc: [email protected]; Jeremy J. Roberts <[email protected]> Subject: Re: [OAUTH-WG] How to properly implement Section 4.1.2.1 Authorization Error Response for OAuth 2.x So what's the question? On Thu, Aug 6, 2026 at 6:30 PM <[email protected] <mailto:[email protected]> > wrote: I am the Technical Manager of the Green Button Alliance. I am responsible for certifying that electric, natural gas, and water utilities comply with the North American Energy Standards (NAESB) Energy Service Provider Interface (ESPI) standard and need a ruling from the IETF OAuth WG regarding an issue that has arisen for Hydro One Networks, Inc. Hydro One Networks, Inc., the largest electric utility in Ontario, Canada, implemented the NAESB ESPI (a.k.a. Green Button) standard in 2023, which uses the OAuth 2.0 standard for customers to authorize client applications to access their energy data. At the time, they were using an IBM Tivoli Authorization Server, which fully complied with the Green Button Alliance legislatively mandated certification test for Section 4.1.2.1. Authorization Error Response. They recently upgraded to the IBM Verify Authorization Server, which no longer passes the same Section 4.1.2.1. Authorization Error Response tests. IBM has agreed to comply with the IETF OAuth Working Group’s response to my questions. The GBA Certification test platform currently submits the following invalid Authorization Endpoint requests and expects the Authorization Server to comply with Section 4.1.2.1. Authorization Error Response error messages: iTestID Label Test Name Query string Status Code Expected Error Message 0 Case 0: no response_type Malformed Authorization Code Request (No response_type field-value) ?client_id=(client_id)&redirect_uri=(redirect_uri)&scope=(scope)&state=ee148ec2-9898-466e-a013-4dedf1eb3018 302/303 ?error=invalid_request parameter and no or empty location header 1 Case 1: no client_id Malformed Authorization Code Request (No client_id field-value) ?response_type=code&redirect_uri=(redirect_uri)&scope=(scope)&state=ee148ec2-9898-466e-a013-4dedf1eb3018 302/303 ?error=invalid_request parameter and no or empty location header 2 Case 2: invalid response_type Malformed Authorization Code Request (Invalid response_type field-value: ?response_type=badresponsetype& client_id=(client_id)&redirect_uri=(redirect_uri)&scope=(scope)&state=ee148ec2-9898-466e-a013-4dedf1eb3018 302/303 ?error=unsupported_response_type parameter and no or empty location header 3 Case 3: invalid client_id Malformed Authorization Code Request (Invalid client_id field-value) ?response_type=code& client_id=invalid_third_party&redirect_uri=(redirect_uri)&scope=(scope)&state=ee148ec2-9898-466e-a013-4dedf1eb3018 302/303 ?error=unauthorized_client parameter and no or empty location header 4 Case 4: invalid redirect_uri Malformed Authorization Code Request (Invalid redirect_uri field-value) ?response_type=code& client_id=(client_id)&redirect_uri=https://services.greenbuttondata.org&scope=(scope)&state=ee148ec2-9898-466e-a013-4dedf1eb3018 302/303 ?error=invalid_request parameter and no or empty location header 5 Case 5: invalid scope Malformed Authorization Code Request (Invalid scope field-value) ?response_type=code& client_id=(client_id)&redirect_uri=(redirect_uri)&scope=FB=????&state=ee148ec2-9898-466e-a013-4dedf1eb3018 302/303 ?error=invalid_scope parameter and no or empty location header All scope string values are application variable contents shown as () entries if present. Malformed values are shown as strings. I do not test for missing state= elements, although the NAESB ESPI standard requires them. The following table contains the current response by the IBM Verify Authorization Server for each of the above test cases: iTestID Status Code Response 0 303 https://cmdcert.greenbuttonalliance.org:8445/ThirdParty/espi/1_1/OAuthCallBack?error=unsupported_response_type&error_description=... 1 401 The response included a full-screen HTML showing the error “CSIAQ0154E The requested OAuth 2.0 Client does not exist” 2 303 https://cmdcert.greenbuttonalliance.org:8445/ThirdParty/espi/1_1/OAuthCallBack?error=unsupported_response_type&error_description... 3 401 The response included a full-screen HTML showing the error “CSIAQ0154E The requested OAuth 2.0 Client does not exist” 4 400 The response included a full-screen HTML showing the error “CSIAQ0167E The redirection URI provided in the request is either invalid or does not match any of the OAuth 2.0 Client’s pre-registered redirect URLs” 5 302 https://...verify.ibm.com/idaas/mtfim/sps/idaas/login... Note: https://cmdcert.greenbuttonalliance.org:8445/ThirdParty/espi/1_1/OAuthCallback is the value of the redirect_uri for all but the negative redirect_uri tests The IBM team indicated that case 5 (invalid scope): The OpenID Connect spec allows ignoring unknown scopes vs. returning an invalid_scope error (https://openid.net/specs/openid-connect-core-1_0.html#AuthRequest). The referenced section of the OpenID Connect standard is the Authentication section, which is NOT what case 5 is testing. However, Section 3.1.2.2. Authentication Request Validation of the OpenID Connect specification indicates the Authorization Server MUST validate all the OAuth 2.0 parameters according to the OAuth 2.0 specification. That includes (2) verifying that a scope parameter is present and contains the openid scope value (If no openid scope value is present, the request may still be a valid OAuth 2.0 request but is not an OpenID Connect request). The IBM team indicated that case 4 (invalid redirect): An OpenID Connect certification has precedence over the IETF OAuth 2.0 RFC 6749 and referenced their official OpenID Foundation cert test for invalid redirect URI, which expects an error page, not a redirect ( <https://www.certification.openid.net/log-detail.html?log=Lbzq5uCWSM1Sij3&public=true> https://www.certification.openid.net/log-detail.html?log=Lbzq5uCWSM1Sij3&public=true). The NAESB ESPI standard does not support the OpenID Connect standard, so we contend that the IBM Verify team’s position that their OpenID Connect server does not need to comply with the IETF RFC 6749 and 6750 standards is a “red herring”. For cases 0 and 2, they have demonstrated the ability to support Section 4.1.2.4 Authorization Error Response properly. The business issue and why I am submitting this email is that Hydro One Networks, Inc. is required by Ontario legislation to be certified by the Green Button Alliance as being in compliance with the NAESB ESPI standard. Without that certification, Hydro One Networks, Inc. will face continuing financial penalties from the Ontario Energy Board. Best regards, Don Donald F. Coffin Founder/CTO REMI Networks 2335 Dunwoody Crossing Suite E Dunwoody, GA 30338-8221 _______________________________________________ OAuth mailing list -- [email protected] <mailto:[email protected]> To unsubscribe send an email to [email protected] <mailto:[email protected]>
_______________________________________________ OAuth mailing list -- [email protected] To unsubscribe send an email to [email protected]
