Hi,
change in test conditions to:
ifOperStatus notin up,monitoring
Tony Guadagno via observium wrote on 22.03.2024 16:04:
Hi, I have created a simple checker to notify on some specific ports.
The way I built it is that I include the word “alert” on the
description. The checker parses that and alerts if that port goes down.
This is working fine for the most part…except on one port. On my
switch, C8 is a fiber 10gig port and it is up as shown here:
Status and Counters - Port Counters for port C8
Name : random span port
MAC Address : eaaaa3-cd9bb8
Link Status : Up
Port Enabled : Yes
However, the checker lists it as down:
The test conditions are pretty simple:
The only difference between the ports that work and C8 are; it is
10gig fiber and it is a span port…do either of these issues explain
why this port is listed as down (only by the checker)???
Thanks in advance!
Tony Guadagno
O +1 585 577 1003
C +1 585 703 6700
E [email protected] <mailto:[email protected]>
cid:[email protected]
_______________________________________________
observium mailing list -- [email protected]
To unsubscribe send an email to [email protected]
--
Mike Stupalov
https://stupalov.com
--
Mike Stupalov,
Discord channel: https://discord.gg/GjpNXKWm8W
Observium Limited, https://observium.org
_______________________________________________
observium mailing list -- [email protected]
To unsubscribe send an email to [email protected]
