http://bugs.openembedded.org/show_bug.cgi?id=819
------- Additional Comments From [EMAIL PROTECTED] 2006-04-14 19:42 ------- (In reply to comment #1) > can you try with wpa-supplicant 0.4.8 which is in upgrades feed? Thanks for the hard work and speedy update Marcin! WPA-PSK is now working with the Ambicom WL1100C on my Zaurus 5500. I am using -Dwext instead of -Dhostap; hostap* modules have loaded without issue. Here is the relevant dmesg output: ****************************************************************** hostap_crypt: registered algorithm 'NULL' hostap_cs: 0.4.7 - 2005-11-20 (Jouni Malinen <[EMAIL PROTECTED]>) hostap_cs: setting Vcc=33 (constant) hostap_cs: CS_EVENT_CARD_INSERTION hostap_cs: ignoring Vcc=33 (from config) Checking CFTABLE_ENTRY 0x01 (default 0x01) IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 io->flags = 0x0046, io.base=0x0000, len=64 hostap_cs: Registered netdevice wifi0 hostap_cs: index 0x01: Vcc 3.3, irq 35, io 0xc4860000-0xc486003f prism2_hw_init: initialized in 200 ms wifi0: NIC: id=0x801b v1.0.0 wifi0: PRI: id=0x15 v1.1.1 wifi0: STA: id=0x1f v1.8.0 wifi0: registered netdevice wlan0 ****************************************************************** And here is the output of cardctl ident: ****************************************************************** Socket 0: product info: "AmbiCom", "WL1100C 802.11b CF-Card", "2.2" manfid: 0xd601, 0x0002 function: 6 (network) ****************************************************************** -- Configure bugmail: http://bugs.openembedded.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. _______________________________________________ Oe mailing list [email protected] https://www.handhelds.org/mailman/listinfo/oe
