On 8/11/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
Ok, I made another stupid mistake. It was a "-" not "_". I apologize for all
these stupid questions and I appreciate your patience.
libsdl-sge is still not building. I ran into another problem.
Here is the error:
NOTE: package libsdl-sge-030809.0.0-r0: task do_compile: started
ERROR: function do_compile failed
ERROR: log data follows
(/home/oc60174/oe/build/tmp/work/libsdl-sge-030809.0.0-r0/temp/log.do_compile.7747)
| NOTE: make install
| == SGE r030809
| == Note: Trying to be C friendly.
| == FreeType2 support enabled.
| == SDL_Image (SFont) support enabled.
|
| ccache arm-linux-g++ -march=armv5te -mtune=xscale
-I/home/oc60174/oe/build/tmp/staging/arm-linux/include
-fexpensive-optimizations -fomit-frame-pointer -frename-registers -O2
-I/home/oc60174/oe/build/tmp/staging/arm-linux/include/SDL -D_REENTRANT -fPIC
/home/oc60174/oe/build/tmp/staging/arm-linux/include/freetype2 -c
sge_surface.cpp
| arm-linux-g++:
/home/oc60174/oe/build/tmp/staging/arm-linux/include/freetype2: linker input
file unused because linking not done
| arm-linux-g++:
/home/oc60174/oe/build/tmp/staging/arm-linux/include/freetype2: linker input
file unused because linking not done
| cc1plus: /home/oc60174/oe/build/tmp/staging/arm-linux/include/freetype2: No
such file or directory
| make: *** [sge_surface.o] Error 1
| FATAL: oe_runmake failed
NOTE: Task failed:
/home/oc60174/oe/build/tmp/work/libsdl-sge-030809.0.0-r0/temp/log.do_compile.7747
NOTE: package libsdl-sge-030809.0.0-r0: task do_compile: failed
ERROR: TaskFailed event exception, aborting
NOTE: package libsdl-sge-030809.0.0: failed
ERROR: Build of libsdl-sge failed
/home/oc60174/oe/build/tmp/staging/arm-linux/include/freetype2 is there. Not
sure why it is not finding it. And what does this linker error mean?
Here is the bb file for reference:
DESCRIPTION = "Simple DirectMedia Layer SGE library."
SECTION = "libs"
PRIORITY = "optional"
MAINTAINER = "me"
DEPENDS = "zlib freetype virtual/libsdl"
LICENSE = "LGPL"
SRC_URI = "http://www.etek.chalmers.se/~e8cal1/sge/files/sge030809.tar.gz \
file://makefileconf_make.patch;patch=1"
S = "${WORKDIR}/sge030809"
CXXFLAGS_append = "-Wall -ggdb3"
CPPFLAGS_append = "-I.. -I../ -I${STAGING_INCDIR} -I${STAGING_INCDIR}/SDL
-I${STAGING_INCDIR}/freetype2 -I${STAGING_INCDIR}/freetype2/freetype \
-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_DEVEL_DEFINES -D_GNU_SOURCE"
You normally should only need ${STAGING_INCDIR} here, the subdirs
should be automatically part of the included file's path. Try removing
the freetype ones and only add them back in if you absolutely need
them. Make sure the files you neeed included are within the right
path.
EXTRA_OEMAKE = "'STAGING_INCDIR=-I${STAGING_INCDIR}' \
'STAGING_LIBDIR=-L${STAGING_LIBDIR}'"
I don't know what this is but it shouldn't be needed.
inherit autotools
do_compile() {
export STAGING_INCDIR=${STAGING_INCDIR}
export STAGING_LIBDIR=${STAGING_LIBDIR}
oe_runmake install
}
do_stage() {
oe_libinstall -so libSDL_sge ${STAGING_LIBDIR}
install -m 0644 *.h ${STAGING_INCDIR}/SDL/
}
and here is the patch file:
Index: sge030809/Makefile.conf
===================================================================
--- sge030809.orig/Makefile.conf
+++ sge030809/Makefile.conf
@@ -9,8 +9,8 @@ C_COMP = y
# Compilers (C and C++)
-CC=gcc
-CXX=g++
+#CC=gcc
+#CXX=g++
# Make sure sdl-config is available
HAVE_SDL =$(shell if (sdl-config --version) < /dev/null > /dev/null 2>&1; then echo "y";
else echo "n"; fi;)
@@ -19,20 +19,22 @@ ifeq ($(HAVE_SDL),n)
endif
# Where should SGE be installed?
+PREFIX =$(shell sdl-config --prefix=${STAGING_LIBDIR})
PREFIX =$(shell sdl-config --prefix)
# Where should the headerfiles be installed?
-PREFIX_H =$(shell sdl-config --prefix)/include/SDL
+PREFIX_H =$(shell sdl-config --prefix=$STAGING_INCDIR)
+PREFIX_H =$(shell sdl-config --prefix)/SDL
# Flags passed to the compiler
-CFLAGS =-Wall -O3 -ffast-math
-SGE_CFLAGS =$(shell sdl-config --cflags)
+#CFLAGS =-Wall -O3 -ffast-math
+SGE_CFLAGS =-I${STAGING_INCDIR}/SDL -D_REENTRANT
# Uncomment to make some more optimizations
#CFLAGS =-Wall -O9 -ffast-math -march=i686
# Libs config
-SGE_LIBS =$(shell sdl-config --libs) -lstdc++
+SGE_LIBS =${STAGING_LIBDIR} -lstdc++
# Is freetype-config available?
@@ -43,8 +45,8 @@ endif
ifneq ($(USE_FT),n)
USE_FT = y
- SGE_LIBS +=$(shell freetype-config --libs)
- FT_CFLAGS =$(shell freetype-config --cflags)
+ SGE_LIBS +=${STAGING_LIBDIR}
+ FT_CFLAGS =${STAGING_INCDIR}/freetype2
endif
Again, I appreciate all your help!
Rob
--
Justin Patrin
_______________________________________________
Oe mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/oe
