I tried the following:
Removed:
-I${STAGING_INCDIR}/freetype2 -I${STAGING_INCDIR}/freetype2/freetype from
CPPFLAGS
and removed:
EXTRA_OEMAKE = "'STAGING_INCDIR=-I${STAGING_INCDIR}' \
'STAGING_LIBDIR=-L${STAGING_LIBDIR}'"
Didn't make a difference. I still get the same
linker input file unused because linking not done
error.
And this one:
| cc1plus: /home/oc60174/oe/build/tmp/staging/arm-linux/include/freetype2: No
such file or directory
I know that this directory exists and the .h files are in there under the
freetype2/freetype directory.
Any ideas?
Rob
-------------- Original message ----------------------
From: "Justin Patrin" <[EMAIL PROTECTED]>
> On 8/11/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> > Ok, I made another stupid mistake. It was a "-" not "_". I apologize for
> > all
> these stupid questions and I appreciate your patience.
> >
> > libsdl-sge is still not building. I ran into another problem.
> >
> > Here is the error:
> > NOTE: package libsdl-sge-030809.0.0-r0: task do_compile: started
> > ERROR: function do_compile failed
> > ERROR: log data follows
> (/home/oc60174/oe/build/tmp/work/libsdl-sge-030809.0.0-r0/temp/log.do_compile.77
> 47)
> > | NOTE: make install
> > | == SGE r030809
> > | == Note: Trying to be C friendly.
> > | == FreeType2 support enabled.
> > | == SDL_Image (SFont) support enabled.
> > |
> > | ccache arm-linux-g++ -march=armv5te -mtune=xscale
> -I/home/oc60174/oe/build/tmp/staging/arm-linux/include
> -fexpensive-optimizations
> -fomit-frame-pointer -frename-registers -O2
> -I/home/oc60174/oe/build/tmp/staging/arm-linux/include/SDL -D_REENTRANT -fPIC
> /home/oc60174/oe/build/tmp/staging/arm-linux/include/freetype2 -c
> sge_surface.cpp
> > | arm-linux-g++:
> /home/oc60174/oe/build/tmp/staging/arm-linux/include/freetype2: linker input
> file unused because linking not done
> > | arm-linux-g++:
> /home/oc60174/oe/build/tmp/staging/arm-linux/include/freetype2: linker input
> file unused because linking not done
> > | cc1plus: /home/oc60174/oe/build/tmp/staging/arm-linux/include/freetype2:
> > No
> such file or directory
> > | make: *** [sge_surface.o] Error 1
> > | FATAL: oe_runmake failed
> > NOTE: Task failed:
> /home/oc60174/oe/build/tmp/work/libsdl-sge-030809.0.0-r0/temp/log.do_compile.774
> 7
> > NOTE: package libsdl-sge-030809.0.0-r0: task do_compile: failed
> > ERROR: TaskFailed event exception, aborting
> > NOTE: package libsdl-sge-030809.0.0: failed
> > ERROR: Build of libsdl-sge failed
> >
> > /home/oc60174/oe/build/tmp/staging/arm-linux/include/freetype2 is there.
> > Not
> sure why it is not finding it. And what does this linker error mean?
> >
> > Here is the bb file for reference:
> > DESCRIPTION = "Simple DirectMedia Layer SGE library."
> > SECTION = "libs"
> > PRIORITY = "optional"
> > MAINTAINER = "me"
> > DEPENDS = "zlib freetype virtual/libsdl"
> > LICENSE = "LGPL"
> >
> > SRC_URI = "http://www.etek.chalmers.se/~e8cal1/sge/files/sge030809.tar.gz \
> > file://makefileconf_make.patch;patch=1"
> >
> > S = "${WORKDIR}/sge030809"
> >
> > CXXFLAGS_append = "-Wall -ggdb3"
> > CPPFLAGS_append = "-I.. -I../ -I${STAGING_INCDIR} -I${STAGING_INCDIR}/SDL
> -I${STAGING_INCDIR}/freetype2 -I${STAGING_INCDIR}/freetype2/freetype \
> > -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_DEVEL_DEFINES -D_GNU_SOURCE"
>
> You normally should only need ${STAGING_INCDIR} here, the subdirs
> should be automatically part of the included file's path. Try removing
> the freetype ones and only add them back in if you absolutely need
> them. Make sure the files you neeed included are within the right
> path.
>
> >
> > EXTRA_OEMAKE = "'STAGING_INCDIR=-I${STAGING_INCDIR}' \
> > 'STAGING_LIBDIR=-L${STAGING_LIBDIR}'"
>
> I don't know what this is but it shouldn't be needed.
>
> >
> > inherit autotools
> >
> > do_compile() {
> > export STAGING_INCDIR=${STAGING_INCDIR}
> > export STAGING_LIBDIR=${STAGING_LIBDIR}
> > oe_runmake install
> > }
> >
> > do_stage() {
> > oe_libinstall -so libSDL_sge ${STAGING_LIBDIR}
> > install -m 0644 *.h ${STAGING_INCDIR}/SDL/
> > }
> >
> >
> > and here is the patch file:
> > Index: sge030809/Makefile.conf
> > ===================================================================
> > --- sge030809.orig/Makefile.conf
> > +++ sge030809/Makefile.conf
> > @@ -9,8 +9,8 @@ C_COMP = y
> >
> >
> > # Compilers (C and C++)
> > -CC=gcc
> > -CXX=g++
> > +#CC=gcc
> > +#CXX=g++
> >
> > # Make sure sdl-config is available
> > HAVE_SDL =$(shell if (sdl-config --version) < /dev/null > /dev/null 2>&1;
> then echo "y"; else echo "n"; fi;)
> > @@ -19,20 +19,22 @@ ifeq ($(HAVE_SDL),n)
> > endif
> >
> > # Where should SGE be installed?
> > +PREFIX =$(shell sdl-config --prefix=${STAGING_LIBDIR})
> > PREFIX =$(shell sdl-config --prefix)
> >
> > # Where should the headerfiles be installed?
> > -PREFIX_H =$(shell sdl-config --prefix)/include/SDL
> > +PREFIX_H =$(shell sdl-config --prefix=$STAGING_INCDIR)
> > +PREFIX_H =$(shell sdl-config --prefix)/SDL
> >
> > # Flags passed to the compiler
> > -CFLAGS =-Wall -O3 -ffast-math
> > -SGE_CFLAGS =$(shell sdl-config --cflags)
> > +#CFLAGS =-Wall -O3 -ffast-math
> > +SGE_CFLAGS =-I${STAGING_INCDIR}/SDL -D_REENTRANT
> > # Uncomment to make some more optimizations
> > #CFLAGS =-Wall -O9 -ffast-math -march=i686
> >
> >
> > # Libs config
> > -SGE_LIBS =$(shell sdl-config --libs) -lstdc++
> > +SGE_LIBS =${STAGING_LIBDIR} -lstdc++
> >
> >
> > # Is freetype-config available?
> > @@ -43,8 +45,8 @@ endif
> >
> > ifneq ($(USE_FT),n)
> > USE_FT = y
> > - SGE_LIBS +=$(shell freetype-config --libs)
> > - FT_CFLAGS =$(shell freetype-config --cflags)
> > + SGE_LIBS +=${STAGING_LIBDIR}
> > + FT_CFLAGS =${STAGING_INCDIR}/freetype2
> > endif
> >
> > Again, I appreciate all your help!
> >
> > Rob
> >
>
>
> --
> Justin Patrin
> _______________________________________________
> Oe mailing list
> [email protected]
> https://www.handhelds.org/mailman/listinfo/oe
_______________________________________________
Oe mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/oe
