Marcel Holtmann schrieb:
Hi Florian,
we currently test the PPP dialup with a Huawei EM770W modem. We can
connect with create-context and activate context but the ppp device is
not configured. connman says that the device is not connected. We use
connman 0.55 and ofono 0.26.
What did we do wrong? The kernel is 2.6.35~pre5 from Meego 1.1 devel.
I never tested this with the EM777W modem, but with the Huawei modems I
have it works just fine.
Especially if it shows the DataConnectionManager interface since then
you have this properly setup and running.
[ org.ofono.DataConnectionManager ]
Powered = 1
Attached = 1
PrimaryContexts = /huawei0/primarycontext1
RoamingAllowed = 1
[ org.ofono.NetworkRegistration ]
Status = registered
Strength = 70
Name = T-Mobile D
Operators = /huawei0/operator/26201
LocationAreaCode = 34591
Mode = auto
MobileCountryCode = 262
CellId = 5950877
MobileNetworkCode = 01
# /usr/lib/ofono/test/list-contexts
[ /huawei0 ]
[ /huawei0/primarycontext1 ]
Username =
Protocol = ip
Name = 3G Connection
Settings = { Interface=ppp0 Netmask=255.255.255.255
Method=static DomainNameServers=193.254.160.1,10.74.83.22,
Address=88.128.36.75 }
Active = 1
AccessPointName = internet.t-d1.de
Password =
Type = internet
This looks like an active Internet context. How did you activate this
one. Via ConnMan or via activate-context test script. If via the script,
then I think that ConnMan is not picking this up. I think that is a bug
in ConnMan.
What does list-services from ConnMan says? The devices and networks are
actually irrelevant.
Hello,
thanks for the fast reply.
Yes I activated the context with the ofono activate-context script. I
tested this method some time ago with connman 0.54 and ofono 0.24. There
it worked.
Here is the result of connman list-services:
[ /profile/default/cellular_262012020178698_primarycontext1 ]
AutoConnect = false
Strength = 74
Name = T-Mobile D
SetupRequired = true
Nameservers = [ ]
Proxy = { }
Favorite = false
Domains.Configuration = [ ]
State = idle
IPv4 = { }
Nameservers.Configuration = [ ]
Mode = gprs
Domains = [ ]
Ethernet = { }
Roaming = 0
IPv4.Configuration = { }
Type = cellular
Immutable = false
LoginRequired = false
How can I activate the the service from connman side via command line?
To get it right: each created context in ofono (and in the modem) is a
service for connman, right?
I have to provide some hardware testing scripts for my customer. They
want to do it automated.
Regards
Florian
Regards
Marcel
_______________________________________________
ofono mailing list
[email protected]
http://lists.ofono.org/listinfo/ofono
_______________________________________________
ofono mailing list
[email protected]
http://lists.ofono.org/listinfo/ofono