Hi Florian,
> >> we currently test the PPP dialup with a Huawei EM770W modem. We can
> >> connect with create-context and activate context but the ppp device is
> >> not configured. connman says that the device is not connected. We use
> >> connman 0.55 and ofono 0.26.
> >> What did we do wrong? The kernel is 2.6.35~pre5 from Meego 1.1 devel.
> >>
> >
> > I never tested this with the EM777W modem, but with the Huawei modems I
> > have it works just fine.
> >
> > Especially if it shows the DataConnectionManager interface since then
> > you have this properly setup and running.
> >
> >
> >> [ org.ofono.DataConnectionManager ]
> >> Powered = 1
> >> Attached = 1
> >> PrimaryContexts = /huawei0/primarycontext1
> >> RoamingAllowed = 1
> >> [ org.ofono.NetworkRegistration ]
> >> Status = registered
> >> Strength = 70
> >> Name = T-Mobile D
> >> Operators = /huawei0/operator/26201
> >> LocationAreaCode = 34591
> >> Mode = auto
> >> MobileCountryCode = 262
> >> CellId = 5950877
> >> MobileNetworkCode = 01
> >>
> >
> >
> >> # /usr/lib/ofono/test/list-contexts
> >> [ /huawei0 ]
> >> [ /huawei0/primarycontext1 ]
> >> Username =
> >> Protocol = ip
> >> Name = 3G Connection
> >> Settings = { Interface=ppp0 Netmask=255.255.255.255
> >> Method=static DomainNameServers=193.254.160.1,10.74.83.22,
> >> Address=88.128.36.75 }
> >> Active = 1
> >> AccessPointName = internet.t-d1.de
> >> Password =
> >> Type = internet
> >>
> >
> > This looks like an active Internet context. How did you activate this
> > one. Via ConnMan or via activate-context test script. If via the script,
> > then I think that ConnMan is not picking this up. I think that is a bug
> > in ConnMan.
> >
> > What does list-services from ConnMan says? The devices and networks are
> > actually irrelevant.
>
> Yes I activated the context with the ofono activate-context script. I
> tested this method some time ago with connman 0.54 and ofono 0.24. There
> it worked.
> Here is the result of connman list-services:
> [ /profile/default/cellular_262012020178698_primarycontext1 ]
> AutoConnect = false
> Strength = 74
> Name = T-Mobile D
> SetupRequired = true
> Nameservers = [ ]
> Proxy = { }
> Favorite = false
> Domains.Configuration = [ ]
> State = idle
> IPv4 = { }
> Nameservers.Configuration = [ ]
> Mode = gprs
> Domains = [ ]
> Ethernet = { }
> Roaming = 0
> IPv4.Configuration = { }
> Type = cellular
> Immutable = false
> LoginRequired = false
>
> How can I activate the the service from connman side via command line?
> To get it right: each created context in ofono (and in the modem) is a
> service for connman, right?
> I have to provide some hardware testing scripts for my customer. They
> want to do it automated.
I am using "test-connman list" and "test-connman connect ...". Make sure
the APN is set properly, but it can also be set via test-connman script.
Regards
Marcel
_______________________________________________
ofono mailing list
[email protected]
http://lists.ofono.org/listinfo/ofono