---
doc/dialup-command-set.txt | 252 ++++++++++++++++++++++++++++++++++++++------
1 files changed, 218 insertions(+), 34 deletions(-)
diff --git a/doc/dialup-command-set.txt b/doc/dialup-command-set.txt
index a7a1df3..9d80170 100644
--- a/doc/dialup-command-set.txt
+++ b/doc/dialup-command-set.txt
@@ -1,45 +1,229 @@
-This document specifies the AT command set used in the bluetooth ofono plugins.
+This document specifies the AT command supported in the AT Emulator and atoms.
Bluetooth Dial-up Networking Profile Features Description
=========================================================
-(Ref. document: Dial-up Networking Profile - Bluetooth specification version
1.1 - 22 February 2001)
+(Ref. document: Dial-up Networking Profile - Bluetooth specification
+ version 1.1- 22 February 2001)
-- AT COMMAND SET USED:
+- AT COMMAND set used:
Commands:
- &C Circuit 109 (DCD) Control
- &D Circuit 108 (DTR) Response
- &F Set to Factory Defined Configuration
- +GCAP Request Complete Capabilities List
- +GMI Request Manufacturer Identification
- +GMM Read Model Identification
- +GMR Read Revision Identification
- A Answer Incoming Call
- D Dial
- E Command Echo
- H Hang Up
- L Monitor Speaker Loudness
- M Monitor Speaker Control
- O Return to Online Data Mode
- P Select Pulse Dialling
- Q Result Code Suppression
- S0 Automatic Answer Control
- S10 Automatic Disconnect Delay Control
- S3 Command Line Termination Character
- S4 Response Formatting Character
- S5 Command Line Editing Character (BACKSPACE)
- S6 Blind Dial Delay Control
- S7 Connection Completion Timeout
- S8 Comma Dial Modifier Delay Control
- T Select Tone Dialling
- V DCE Response Format
- X Call Progress Monitoring Control
- Z Reset to Default Configuration
+ &C Circuit 109 (DCD) Control
+ &D Circuit 108 (DTR) Response
+ &F Set to Factory Defined Configuration
+ +GCAP Request Complete Capabilities List
+* +GMI Request Manufacturer Identification
+* +GMM Read Model Identification
+* +GMR Read Revision Identification
+ A Answer Incoming Call
+ D Dial
+ E Command Echo
+ H Hang Up
+ L Monitor Speaker Loudness
+ M Monitor Speaker Control
+ O Return to Online Data Mode
+ P Select Pulse Dialling
+ Q Result Code Suppression
+ S0 Automatic Answer Control
+ S10 Automatic Disconnect Delay Control
+ S3 Command Line Termination Character
+ S4 Response Formatting Character
+ S5 Command Line Editing Character (BACKSPACE)
+ S6 Blind Dial Delay Control
+ S7 Connection Completion Timeout
+ S8 Comma Dial Modifier Delay Control
+ T Select Tone Dialling
+ V DCE Response Format
+ X Call Progress Monitoring Control
+ Z Reset to Default Configuration
Result codes:
OK Acknowledge execution of a command
CONNECT Connection has been established
- RING The DCE has detected an incoming call signal from
network
- NO CARRIER The connection has been terminated, or attempt to
establish
- a connection failed
+ RING The DCE has detected an incoming call signal
+ from network
+ NO CARRIER The connection has been terminated, or attempt to
+ establish a connection failed
ERROR Error
NO DIALTONE No dial-tone detected
BUSY Busy signal detected
+
+Bluetooth Hands-Free Profile Description
+=========================================================
+(Ref. document: HFP1.5_SPEC (Car Working Group) - version V10r00 - 2005-11-25)
+
+- AT COMMAND set used:
+Commands:
+ D> Extension of the standard ATD command, intended for
+ memory dialing. Only voice calls are covered here
+ +CIND Standard indicator update AT command.
+
+ +NREC Noise Reduction and Echo Canceling
+ +VGM Gain of Microphone
+ +VGS Gain of Speaker
+ +BINP Bluetooth INPut
+ +BLDN Bluetooth Last Dialed Number
+ +BVRA Bluetooth Voice Recognition Activation
+ +BRSF Bluetooth Retrieve Supported Features
+ +BTRH Bluetooth Response and Hold Feature
+* +CCWA
+* +CHLD
+* +CHUP
+* +CLCC
+* +COPS
+* +CMEE
+* +CLIP
+* +CMER
+* +VTS
+* +CNUM
+(* : see below )
+
+Unsolicited result:
+ +CIEV
+ +BSIR Bluetooth Setting of In-band Ring tone
+Result codes:
+ NO ANSWER
+ DELAYED
+ BLACKLISTED
+
+AT commands supported in emulator:
+=========================================
+
+Call management:
+----------------
+ +CBST Select bearer service type
+ +CHLD Standard call hold and multiparty handling AT command
+ +CHUP Hangup call
+ +CMOD Call mode
+ +CPAS Phone activity status
+ +CVHU Voice Hangup Control
+ +CLIP Calling line identification presentation
+ +CNUM Subscriber number
+ +VTS DTMF and tone generation
+ +CACM Accumulated Call Meter
+ +COLP Connected Line Identification Presentation
+
+Device:
+--------
+ +CBC Battery charge
+ +CBKLT Backlight
+ +CCLK Clock
+ +CSO Command Screen Orientation
+ +CPWROFF Switch off MS
+ +CPOS Positioning Control
+ +CSS Command Screen Size
+ +CGMI Request manufacturer identification
+ +CGMM Request model identification
+ +CGMR Request revision identification
+ +GMI Request Manufacturer Identification
+ +GMM Request Model Identification
+ +GMR Request Revision Identification
+ +CGSN Request product serial number identification
+ +CKPD Keypad control
+
+General:
+--------
+ +CEER Extended error report
+ +CFUN Set phone functionality
+ +CGEQMIN 3G Quality of Service Profile (Minimum acceptable)
+ +CLAC List all available AT commands
+ +CLCK Facility lock
+ +CMEC Mobile Termination control mode
+ +CMEC Mobile Termination control mode
+ +CMEE Report Mobile Termination error
+ +CMER Mobile Termination event reporting
+ +CPWD Change password
+ +CTSA Command Touch Screen Action
+ +CIMI Request international mobile subscriber identity
+ +FCLASS Service Class Selection and Identification
+
+GPRS:
+-----
+ +CGACT PDP context activate or deactivate
+ +CGATT PS attach or detach
+ +CGCMOD PDP Context Modify
+ +CGDCONT Define PDP Context
+ +CGEQREQ 3G Quality of Service Profile (Requested)
+ +CGQREQ Quality of Service Profile (Requested)
+ +CGREG GPRS network registration status
+ +CGDSCONT Define Secondary PDP Context
+ +CGDATA Enter Data State
+ +CGTFT Traffic Flow Template
+ +CGQMIN Quality of Service Profile (Minimum Acceptable)
+ +CGEQNEG 3G Quality of Service Profile (Negotiated)
+ +CGCMOD PDP Context Modify
+ +CGCLASS GPRS Mobile Station Class
+ +CGPADDR Show PDP address
+ +CGCLASS GPRS Mobile Station Class
+ +DR Data Compression Reporting
+ +DS Data Compression
+
+Network:
+--------
+ *CNTI Network RAT capabilities
+ +COPS PLMN selection
+ +CPOL Preferred PLMN list
+ +CREG Network registration
+ +CSQ Signal quality
+ +CTZU Automatic Time Zone Update
+ +CTZR Time Zone Reporting
+
+SIM:
+----
+ +CPBR Read phonebook entries
+ +CPBS Select phonebook memory storage
+ +CPBW Write phonebook entry
+ +CPBF Find Phonebook Entries
+ +CPIN Enter PIN
+ +CRSM Restricted SIM access
+ +CSIM Generic SIM access
+ +CUSD Unstructured supplementary service data
+ +CASIM SIM Slot
+ +CRES Restore Settings (SMS)
+ +CSAS Save Settings (SMS)
+ +CCID Request SIM Card Identification
+
+Supplementary Services:
+-----------------------
+ +CCFC Call forwarding number and conditions
+ +CCWA Call waiting
+ +CLCC List current calls
+ +CLIR Calling line identification restriction
+ +CSSN Supplementary Service Notifications
+
+SMS:
+----
+ +CMTI A GSM/GPRS modem or mobile phone uses +CMTI to notify
+ the computer / PC that a new SMS message has been
+ received and the memory location where it is stored.
+ +CMT A GSM/GPRS modem or mobile phone uses +CMT to forward
+ a newly received SMS message to the computer / PC.
+ +CGSMS Select service for MO SMS messages
+ +CMGF Message Format
+ +CMGS Send Message
+ +CSCA Service Centre Address
+ +CESP Enter SMS Block Mode Protocol
+ +CMGC Send Command
+ +CMGD Delete Message
+ +CMGL List Messages
+ +CMGR Read Message
+ +CMGW Write Message to Memory
+ +CMMS More Messages to Send
+ +CMSS Send Message from Storage
+ +CNMA New Message Acknowledgement to ME/TA
+ +CNMI New Message Indications to TE
+ +CPMS Preferred Message Storage
+ +CSCS Select TE Character Set
+ +CSCB Select Cell Broadcast Message Types
+ +CSDH Show Text Mode Parameters
+ +CSMP Set Text Mode Parameters
+ +CSMS Select Message Service
+
+Debug:
+------
+ +TRACE Switch Trace ON/OFF
+
+AGPS:
+-----
+ +CMOLR Mobile Originated Location Request
+ +CCLRAD Needed for clearing of old Assistance Data stored
+ for AGPS positioning
+
--
1.7.1
_______________________________________________
ofono mailing list
[email protected]
http://lists.ofono.org/listinfo/ofono
