Hi Olivier, > doc/dialup-command-set.txt | 252 > ++++++++++++++++++++++++++++++++++++++------ > 1 files changed, 218 insertions(+), 34 deletions(-) > > diff --git a/doc/dialup-command-set.txt b/doc/dialup-command-set.txt > index a7a1df3..9d80170 100644 > --- a/doc/dialup-command-set.txt > +++ b/doc/dialup-command-set.txt > @@ -1,45 +1,229 @@ > -This document specifies the AT command set used in the bluetooth ofono > plugins. > +This document specifies the AT command supported in the AT Emulator and > atoms. > > Bluetooth Dial-up Networking Profile Features Description > ========================================================= > -(Ref. document: Dial-up Networking Profile - Bluetooth specification version > 1.1 - 22 February 2001) > +(Ref. document: Dial-up Networking Profile - Bluetooth specification > + version 1.1- 22 February 2001) > > -- AT COMMAND SET USED: > +- AT COMMAND set used: > Commands: > - &C Circuit 109 (DCD) Control > - &D Circuit 108 (DTR) Response > - &F Set to Factory Defined Configuration > - +GCAP Request Complete Capabilities List > - +GMI Request Manufacturer Identification > - +GMM Read Model Identification > - +GMR Read Revision Identification > - A Answer Incoming Call > - D Dial > - E Command Echo > - H Hang Up > - L Monitor Speaker Loudness > - M Monitor Speaker Control > - O Return to Online Data Mode > - P Select Pulse Dialling > - Q Result Code Suppression > - S0 Automatic Answer Control > - S10 Automatic Disconnect Delay Control > - S3 Command Line Termination Character > - S4 Response Formatting Character > - S5 Command Line Editing Character (BACKSPACE) > - S6 Blind Dial Delay Control > - S7 Connection Completion Timeout > - S8 Comma Dial Modifier Delay Control > - T Select Tone Dialling > - V DCE Response Format > - X Call Progress Monitoring Control > - Z Reset to Default Configuration > + &C Circuit 109 (DCD) Control > + &D Circuit 108 (DTR) Response > + &F Set to Factory Defined Configuration > + +GCAP Request Complete Capabilities List > +* +GMI Request Manufacturer Identification > +* +GMM Read Model Identification > +* +GMR Read Revision Identification > + A Answer Incoming Call > + D Dial > + E Command Echo > + H Hang Up > + L Monitor Speaker Loudness > + M Monitor Speaker Control > + O Return to Online Data Mode > + P Select Pulse Dialling > + Q Result Code Suppression > + S0 Automatic Answer Control > + S10 Automatic Disconnect Delay Control > + S3 Command Line Termination Character > + S4 Response Formatting Character > + S5 Command Line Editing Character (BACKSPACE) > + S6 Blind Dial Delay Control > + S7 Connection Completion Timeout > + S8 Comma Dial Modifier Delay Control > + T Select Tone Dialling > + V DCE Response Format > + X Call Progress Monitoring Control > + Z Reset to Default Configuration > Result codes: > OK Acknowledge execution of a command > CONNECT Connection has been established > - RING The DCE has detected an incoming call signal from > network > - NO CARRIER The connection has been terminated, or attempt to > establish > - a connection failed > + RING The DCE has detected an incoming call signal > + from network > + NO CARRIER The connection has been terminated, or attempt to > + establish a connection failed > ERROR Error > NO DIALTONE No dial-tone detected > BUSY Busy signal detected
please split this into at least two patches. One for fixes to the current information and one for updates. > +Bluetooth Hands-Free Profile Description > +========================================================= > +(Ref. document: HFP1.5_SPEC (Car Working Group) - version V10r00 - > 2005-11-25) > + > +- AT COMMAND set used: > +Commands: > + D> Extension of the standard ATD command, intended for > + memory dialing. Only voice calls are covered here > + +CIND Standard indicator update AT command. > + > + +NREC Noise Reduction and Echo Canceling > + +VGM Gain of Microphone > + +VGS Gain of Speaker > + +BINP Bluetooth INPut > + +BLDN Bluetooth Last Dialed Number > + +BVRA Bluetooth Voice Recognition Activation > + +BRSF Bluetooth Retrieve Supported Features > + +BTRH Bluetooth Response and Hold Feature > +* +CCWA > +* +CHLD > +* +CHUP > +* +CLCC > +* +COPS > +* +CMEE > +* +CLIP > +* +CMER > +* +VTS > +* +CNUM > +(* : see below ) > + > +Unsolicited result: > + +CIEV > + +BSIR Bluetooth Setting of In-band Ring tone > +Result codes: > + NO ANSWER > + DELAYED > + BLACKLISTED Or make that three patches to have the lists separated in separate patches. A nice revision history is also important to us. > +AT commands supported in emulator: > +========================================= > + > +Call management: > +---------------- > + +CBST Select bearer service type > + +CHLD Standard call hold and multiparty handling AT command > + +CHUP Hangup call > + +CMOD Call mode > + +CPAS Phone activity status > + +CVHU Voice Hangup Control > + +CLIP Calling line identification presentation > + +CNUM Subscriber number > + +VTS DTMF and tone generation > + +CACM Accumulated Call Meter > + +COLP Connected Line Identification Presentation > + > +Device: > +-------- > + +CBC Battery charge > + +CBKLT Backlight > + +CCLK Clock > + +CSO Command Screen Orientation > + +CPWROFF Switch off MS > + +CPOS Positioning Control > + +CSS Command Screen Size > + +CGMI Request manufacturer identification > + +CGMM Request model identification > + +CGMR Request revision identification > + +GMI Request Manufacturer Identification > + +GMM Request Model Identification > + +GMR Request Revision Identification > + +CGSN Request product serial number identification > + +CKPD Keypad control > + > +General: > +-------- > + +CEER Extended error report > + +CFUN Set phone functionality > + +CGEQMIN 3G Quality of Service Profile (Minimum acceptable) Why is this one in the general section? Sounds like GPRS to me. > + +CLAC List all available AT commands > + +CLCK Facility lock > + +CMEC Mobile Termination control mode > + +CMEC Mobile Termination control mode > + +CMEE Report Mobile Termination error > + +CMER Mobile Termination event reporting > + +CPWD Change password > + +CTSA Command Touch Screen Action > + +CIMI Request international mobile subscriber identity > + +FCLASS Service Class Selection and Identification > + > +GPRS: > +----- > + +CGACT PDP context activate or deactivate > + +CGATT PS attach or detach > + +CGCMOD PDP Context Modify > + +CGDCONT Define PDP Context > + +CGEQREQ 3G Quality of Service Profile (Requested) > + +CGQREQ Quality of Service Profile (Requested) > + +CGREG GPRS network registration status > + +CGDSCONT Define Secondary PDP Context > + +CGDATA Enter Data State > + +CGTFT Traffic Flow Template > + +CGQMIN Quality of Service Profile (Minimum Acceptable) > + +CGEQNEG 3G Quality of Service Profile (Negotiated) > + +CGCMOD PDP Context Modify > + +CGCLASS GPRS Mobile Station Class > + +CGPADDR Show PDP address > + +CGCLASS GPRS Mobile Station Class > + +DR Data Compression Reporting > + +DS Data Compression > + > +Network: > +-------- > + *CNTI Network RAT capabilities > + +COPS PLMN selection > + +CPOL Preferred PLMN list > + +CREG Network registration > + +CSQ Signal quality > + +CTZU Automatic Time Zone Update > + +CTZR Time Zone Reporting > + > +SIM: > +---- > + +CPBR Read phonebook entries > + +CPBS Select phonebook memory storage > + +CPBW Write phonebook entry > + +CPBF Find Phonebook Entries > + +CPIN Enter PIN > + +CRSM Restricted SIM access > + +CSIM Generic SIM access Do we really plan to give access to the SIM filesystem. > + +CUSD Unstructured supplementary service data Why is this part of the SIM section? > + +CASIM SIM Slot > + +CRES Restore Settings (SMS) > + +CSAS Save Settings (SMS) These two sounds like something that is either SMS or we should not do at all. > + +CCID Request SIM Card Identification > + > +Supplementary Services: > +----------------------- > + +CCFC Call forwarding number and conditions > + +CCWA Call waiting > + +CLCC List current calls > + +CLIR Calling line identification restriction > + +CSSN Supplementary Service Notifications > + > +SMS: > +---- > + +CMTI A GSM/GPRS modem or mobile phone uses +CMTI to notify > + the computer / PC that a new SMS message has been > + received and the memory location where it is stored. > + +CMT A GSM/GPRS modem or mobile phone uses +CMT to forward > + a newly received SMS message to the computer / PC. > + +CGSMS Select service for MO SMS messages > + +CMGF Message Format > + +CMGS Send Message > + +CSCA Service Centre Address > + +CESP Enter SMS Block Mode Protocol > + +CMGC Send Command > + +CMGD Delete Message > + +CMGL List Messages > + +CMGR Read Message > + +CMGW Write Message to Memory > + +CMMS More Messages to Send > + +CMSS Send Message from Storage > + +CNMA New Message Acknowledgement to ME/TA > + +CNMI New Message Indications to TE > + +CPMS Preferred Message Storage > + +CSCS Select TE Character Set > + +CSCB Select Cell Broadcast Message Types > + +CSDH Show Text Mode Parameters > + +CSMP Set Text Mode Parameters > + +CSMS Select Message Service > + > +Debug: > +------ > + +TRACE Switch Trace ON/OFF > + > +AGPS: > +----- > + +CMOLR Mobile Originated Location Request > + +CCLRAD Needed for clearing of old Assistance Data stored > + for AGPS positioning > + So I think we a separate patch for each section. Makes is more clear to where the information came from. Regards Marcel _______________________________________________ ofono mailing list [email protected] http://lists.ofono.org/listinfo/ofono
