Hi Matti,
> -------------------------
usbserial:
--------------------------
usbserial: USB Serial support registered for GSM modem (1-port)
usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
Are you sure the ttys are handled by the 'usbserial' module and not
'option'? If they really are, then you might need to update
plugins/udevng.c appropriately.
Right now I see the following in the vendor_list[] table:
{ "huawei", "option", "201e" },
{ "huawei", "cdc_wdm", "12d1" },
{ "huawei", "cdc_ether", "12d1" },
{ "huawei", "qmi_wwan", "12d1" },
{ "huawei", "option", "12d1" },
You probably also need to add an entry for cdc_ncm. See the recent
patch adding similar support for mbm:
git show b04fabcda34b6433209bacab32b78a95b1c11b3e
I'd start with adding the cdc_ncm entry to vendor_list[] table and see
if that makes things work.
Regards,
-Denis
_______________________________________________
ofono mailing list
[email protected]
https://lists.ofono.org/mailman/listinfo/ofono
