In fact it seems that no ofonod is needed to get old Huawei 3131 up and running. Connman just notices it as wired service after plugging in.
-Matti 2016-01-12 11:40 GMT+02:00 matti kaasinen <[email protected]>: > I tried without option drivers. Ofono logs looked very similar to those of > the old Huawei 3131. Main exception was that old uses interface eth1 and > new wwan0. The main difference, however, is that there is no traffic with > the new modem. > > Modem management commands do not work if option driver is not loaded (for > example online-modem). On the other hand this seems the case with the old > modem, too. Connmanctl services command lists old modem as Wired service > and new is not listed at all if these option drivers are not present. > > -Matti > > 2016-01-12 10:47 GMT+02:00 matti kaasinen <[email protected]>: > >> >> 2016-01-12 10:38 GMT+02:00 matti kaasinen <[email protected]>: >> >>> Note that driver listed is not kernel drive, like with new 3131 but most >>> likely ofono driver - at least it is not listed with lsmod. >> >> >> >> Now I was not careful enough. Modem was created exactly as before - >> check_usb_device() reported kernel module and create_modem() reported >> huawei. >> > >
_______________________________________________ ofono mailing list [email protected] https://lists.ofono.org/mailman/listinfo/ofono
