Hi Alex, Please find inline comments . Alex Naslednikov wrote: > Hello, Stan, > The problem you describe can only happen when NDIS doesn't receive > completion on its send NBLs (Net Buffer Lists). This bug was shown > during WHQL testing and successfully resolved.
Would you verify the patch is in SVN code base? > Now I can't see the problem, at least at our MLNX_WinOF 2.1 branch. > Can you please specify some more information: Two port HCA (MT26418) one port cable connected, other port has no cable. Disable IPoIB on port not connected - OK Disable IPoIB on connected port - devmgmt.msc window hangs. Kill devmgmt.msc window Enable IPoIB which was previously disable hangs. > * Windows version Server 2008 SP2 x64 Server 2008 R2 x64 Connectx HCA MT26418 firmware 2.07.0000 on both systems. > * Connection type (B2B/switch) Switch, 24 port > * Is opensm running ? Opensm 3.3.3 on another node; will try trunk openSM (3.0.0) today just to be sure. > * Is heavy send/recv traffic running No traffic; idle system & uninstall test cases hang. IPoIB & stack built with latest MSFT WDK - 7600.16385.0 Stan. > I tested the system with all the options above and disable/enable > works fine. > > Our current WHQL status for R2 is: > 1. Driver Reliability, Device Fundamentals, MultipleProcessorGroups: > All tests were executed and passed except of "Device Install Check for > Other Device Stability" (the problem description is here: > http://www.ms-news.net/f1024/unexpected-error-device-install-check-other > -device-stability-8629443.html) > 2. Lan testing > NDIS6.0 - all the test executed manually, seems that we can pass it > NDIS6.0 priority - we should get waiver for 802.1p support > NDIS6.5 - can pass with waivers > NDIS6.5 MPE - it is running now, seems to be ok > NDIS 6.5 WoL - seems to face a bug between ipoib and ibbus - I am > working on it right now > NDIS 6.5 Manual - will be tested today/tomorrow > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Smith, Stan > Sent: Wednesday, November 18, 2009 8:20 PM > To: Tzachi Dar > Cc: [email protected] > Subject: [ofw] IPoIV_NDIS6_CM status > > > Hello, > Your latest IPoIB_NDIS6_CM checkins resolved the NDIS6 IPoIB BSOD > crash during install. > IPoIB appears to be working fine for Tx & Rx tests. > > The latest problem is when you disable the IPoIB device it hangs the > device manager view window/process. > > This behavior also hangs the WinOF uninstall process in the IPoIB > device disable customAction. > How far into WHQL did you say you were? > > The process hang-up occurs on the last IPoIB device instance disable. > > Stan. > > _______________________________________________ > ofw mailing list > [email protected] > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw _______________________________________________ ofw mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw
