Here's the requested results: NetworkDirect and WSD are not installed.
Before IPoIB device disable: 1: kd> x ipoib!g_* fffff880`04cc9634 ipoib!g_ipoib_send_SG_failed = 5 fffff880`04cc963c ipoib!g_NBL = 0xad fffff880`04cc9598 ipoib!g_IpoibMiniportDriverHandle = 0xfffffa80`05793020 fffff880`04cc94d0 ipoib!g_stat = struct _IPOIB_ST_STAT fffff880`04cc9630 ipoib!g_ipoib_send_SG_real = 0xb5 fffff880`04cc9640 ipoib!g_NBL_complete = 0 fffff880`04cc9214 ipoib!g_ipoib_dbg_level = 2 fffff880`04cc9644 ipoib!g_ipoib_send_mcast = 0x11 fffff880`04cc9628 ipoib!g_ipoib_send_SW_in_loop = 0xad fffff880`04cc9618 ipoib!g_ipoib_send = 0xa8 fffff880`04cc962c ipoib!g_ipoib_send_SG_pending = 6 fffff880`04cc961c ipoib!g_ipoib_send_ack = 0xa8 fffff880`04cc9624 ipoib!g_ipoib_send_SG = 0xad fffff880`04cc9620 ipoib!g_ipoib_send_SW = 0xad fffff880`04cc9638 ipoib!g_ipoib_send_reset = 0 fffff880`04cc9218 ipoib!g_ipoib_dbg_flags = 0xfff fffff880`04cc95a0 ipoib!g_ipoib = struct _ipoib_globals fffff880`04cc9488 ipoib!g_p_drv_obj = 0xfffffa80`04e0d360 fffff880`04cc9610 ipoib!g_IpoibDriverContext = 0x00000000`00000000 1: kd> g After disabling both IPoIB devices via devmgmt.msc; devmgmt.msc window is hung at this time: nt!DbgBreakPointWithStatus: fffff800`01484f60 cc int 3 1: kd> x ipoib!g_* fffff880`04cc9634 ipoib!g_ipoib_send_SG_failed = 5 fffff880`04cc963c ipoib!g_NBL = 0xc4 fffff880`04cc9598 ipoib!g_IpoibMiniportDriverHandle = 0xfffffa80`05793020 fffff880`04cc94d0 ipoib!g_stat = struct _IPOIB_ST_STAT fffff880`04cc9630 ipoib!g_ipoib_send_SG_real = 0xcc fffff880`04cc9640 ipoib!g_NBL_complete = 0 fffff880`04cc9214 ipoib!g_ipoib_dbg_level = 2 fffff880`04cc9644 ipoib!g_ipoib_send_mcast = 0x11 fffff880`04cc9628 ipoib!g_ipoib_send_SW_in_loop = 0xc4 fffff880`04cc9618 ipoib!g_ipoib_send = 0xbf fffff880`04cc962c ipoib!g_ipoib_send_SG_pending = 6 fffff880`04cc961c ipoib!g_ipoib_send_ack = 0xbf fffff880`04cc9624 ipoib!g_ipoib_send_SG = 0xc4 fffff880`04cc9620 ipoib!g_ipoib_send_SW = 0xc4 fffff880`04cc9638 ipoib!g_ipoib_send_reset = 0 fffff880`04cc9218 ipoib!g_ipoib_dbg_flags = 0xfff fffff880`04cc95a0 ipoib!g_ipoib = struct _ipoib_globals fffff880`04cc9488 ipoib!g_p_drv_obj = 0xfffffa80`04e0d360 fffff880`04cc9610 ipoib!g_IpoibDriverContext = 0x00000000`00000000 Stan. Tzachi Dar wrote: > Can you also connect a kernel debugger to the machine (when it is > stacked) and run x ipoib!g_* and send us the results. > > Thanks > Tzachi > > -----Original Message----- > From: Alex Naslednikov > Sent: Wednesday, November 18, 2009 10:01 PM > To: Smith, Stan; Tzachi Dar > Cc: [email protected] > Subject: RE: [ofw] IPoIV_NDIS6_CM status > > Hello, Stan, > The problem you desribe can only happen when NDIS doesn't receive > completion on its send NBLs (Net Buffer Lists). This bug was shown > during WHQL testing and succesfully resolved. > Now I can't see the problem, at least at our MLNX_WinOF 2.1 branch. > Can you please specify some more information: > * Windows version > * Connection type (B2B/switch) > * Is opensm running ? > * Is heavy send/recv traffic running > I tested the system with all the options above and disable/enable > works fine. > > Our current WHQL status for R2 is: > 1. Driver Reliability, Device Fundamentals, MultipleProcessorGroups: > All tests were executed and passed except of "Device Install Check for > Other Device Stability" (the problem description is here: > http://www.ms-news.net/f1024/unexpected-error-device-install-check-other > -device-stability-8629443.html) > 2. Lan testing > NDIS6.0 - all the test executed manually, seems that we can pass it > NDIS6.0 priority - we should get waiver for 802.1p support > NDIS6.5 - can pass with waivers > NDIS6.5 MPE - it is running now, seems to be ok NDIS 6.5 WoL - seems > to face a bug between ipoib and ibbus - I am working on it right now > NDIS > 6.5 Manual - will be tested today/tomorrow > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Smith, Stan > Sent: Wednesday, November 18, 2009 8:20 PM > To: Tzachi Dar > Cc: [email protected] > Subject: [ofw] IPoIV_NDIS6_CM status > > > Hello, > Your latest IPoIB_NDIS6_CM checkins resolved the NDIS6 IPoIB BSOD > crash during install. > IPoIB appears to be working fine for Tx & Rx tests. > > The latest problem is when you disable the IPoIB device it hangs the > device manager view window/process. > > This behavior also hangs the WinOF uninstall process in the IPoIB > device disable customAction. > How far into WHQL did you say you were? > > The process hang-up occurs on the last IPoIB device instance disable. > > Stan. > > _______________________________________________ > ofw mailing list > [email protected] > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw _______________________________________________ ofw mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw
