On Fri, Sep 2, 2016 at 10:25 AM, Alexander Jung <a.j...@scilset.de> wrote: > Hello Martin, > > starting X without xorg.conf results in the same proplem. > > The Xorg.0.log is here ... > > http://vorschau.zebworx.com/OI/Xorg.0.log-without-xorg.conf
I have an innocent side question: (EE) Failed to load /usr/lib/xorg/modules/extensions/amd64/libglx.so: ld.so.1: Xorg: fatal: /usr/lib/xorg/modules/extensions/amd64/libglx.so: open failed: No such file or directory Does ogl-select get confused by the presence of both Nvidia and Intel adapters? Best regards Aurelien > > > Best regards, > Alex > > > > On 09/ 1/16 08:37 AM, Мартин Бохниг wrote: > > Moin Alex, > > tnx for the prompt delivery of the output I requested. > Although syslog is missing. > Please check syslog if there is anything related. > > Mmh. > > To begin with let me make one thing clear once again, if it wasn't clear > enough: You do NOT need /etc/X11/xorg.conf anymore. > And if you decide to create it, you have to first hack out all the mistakes > that Xorg -configure usually puts into it. > (such as, for a single Intel GPU two device sections get created, one for > vesa and one for intel. And then worse: For the intel device the monitor may > get defined to spread across 2 or 3 heads. That's what I always get with > Xorg -configure on my Celeron G530 on Gigabyte Technology Co., Ltd. > H61M-S2V-B3 > BIOS Configuration: Award Software International, Inc. F8 03/27/2012. > > If there is another head in the box, then Xorg -configure often gets totally > lost. > What are your BIOS menu settings to enable the Intel GPU and to disable the > NVidia GPU? > What's your stolen ram size (gtt)? > Does increasing it help? > > So the first thing I suggest is that you rename xorg.conf and test if that > helps. > If not, then make sure that xorg.conf is 100% correct - and then set a fixed > screen size, such as 1024x768. > > If this still doesn't help, then mmmmh. > You are close. I saw such errors. I noticed that: > > [ 637.050] (II) intel(0): EDID for output VGA1 > [ 637.050] (II) intel(0): Output LVDS1 connected > [ 637.050] (II) intel(0): Output VGA1 disconnected > [ 637.050] (II) intel(0): Using exact sizes for initial modes > [ 637.050] (II) intel(0): Output LVDS1 using initial mode 1920x1080 > > > So, while it may still be ok that EDID was taken for VGA1 while the current > display is in fact LVDS1. > Perhaps 1920x1080 is simply too large? > > Would it work (as a test) if you connect VGA1? > > > Another thing, probably unrelated: > > http://vorschau.zebworx.com/OI/output-ls > > > Could you please reboot to -s (single user after a reboot, fast reboot is > enough) and > > #cd /dev/dri > #mv -i card0 controlD64 > #mv -i card1 card0 > > > ? > > That *probably* won't change anything, although it would be the cleaner way. > I fixed it in the global diff against OS/Net available here: > > http://opensxce.org/intelkms_working_testbins/Intel_DRMxKMS_S12_to_Illumos_backport__RELEASE/01__GLOBAL/00__SRC/DIFFS/illumos-gate__VANILLA__checkout20160629_git450b24a3e08dd5d6007467b18ef9cea400f7385a_____versus_____illumos-gate__checkout20160629_git450b24a3e08dd5d6007467b18ef9cea400f7385a__OpenSXCE_DRMKMS.diff.bz2 > > in devfsadm. > But OI/Hipster didn't take this unless there is a real reason (due to their > strict policy to stay based on vanilla OS/Net). > > > Before we continue, I would like to be sure that not an invalid or buggy > xorg.conf is the reason. > Are you in UEFI mode or on BIOS? > > Arg, ok, you can only be in legacy BIOS mode with this iso. > So that's also not the reason. > > If all this doesn't bring you forward, will it work if you copy over a clean > xorg.conf (that you need to put somewhere as reserve, such as in > /etc/X11/xorg.conf__intel) > > And if you in the newly created/cp'ed over /etc/X11/xorg.conf disable DRI in > step a and accelleration in steb b? > > > So much for now, those are the typical things to try in these situations. > > > MfG %martin > > > > > > Четверг, 1 сентября 2016, 5:04 UTC от Alexander Jung <a.j...@scilset.de>: > > Hello Martin, > > here are some information you need ... > > http://vorschau.zebworx.com/OI/output-scanpci > http://vorschau.zebworx.com/OI/output-ls > http://vorschau.zebworx.com/OI/Xorg.0.log > http://vorschau.zebworx.com/OI/screenmovie.mp4 > > There was no /etc/X11/xorg.conf, so i generated one with Xorg -configure. > > In /var/adm/messages there was no generated output. > > Best regards, > Alex > > > > > > On 08/31/16 07:52 PM, Мартин Бохниг via oi-dev wrote: > > Hallo Alex, > > sorry for experiencing problems (tut mir leid, dass Du Probleme damit hast). > What is where exactly happening, in which precise order, how and why (was > passiert wo, in welcher genauen Reihenfolge wie und warum)? > > The least you should send to enable me or anyone to help you (Das Mindeste, > was Du mitsenden solltest, um mich oder sonst-wen in eine Position zu > bringen, Dir helfen zu koennen, waere das Folgende) : > > #0.) Screen photograph or best video > #1.) /var/adm/messages* > #2.) /var/log/Xorg.0.log* > #3.) scanpci -v output (what is your device's pciid?) > #4.) ls -l /dev/dri > > Then I need to know if you deleted /etc/X11/xorg.conf before running into > problems, as you should have > > > A pity that only those take the time to report whatsoever, for whom it is > *not* working, while the silent 99% stay silent (reminds me of what happened > 2 weeks ago, but that's how humans appear to be designed to be) > > > I hope we can get this working for you, > mit den besten Gruessen, > > %martin bochnig > Ostberlin > > > > > Среда, 31 августа 2016, 16:48 UTC от Alexander Jung <a.j...@scilset.de>: > > Hi, > > after the last update of hipster on my Lenovo W530, the new i915 driver > don't work correct, the screen is distorted. > > The W530 has an intel and nvidia graphicscard, but because the nvidiadriver > don't work at all i switched to intel in bios. > > lspci shows > 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor > Graphics Controller (rev 09) > > I am also very interestet in a solution for the nvidia card. > > > Best regards, > > Alex > > > PS: Sorry for my bad english > > > > _______________________________________________ > oi-dev mailing list > oi-dev@openindiana.org > https://openindiana.org/mailman/listinfo/oi-dev > > > > > _______________________________________________ > oi-dev mailing list > oi-dev@openindiana.org > https://openindiana.org/mailman/listinfo/oi-dev -- --- Praise the Caffeine embeddings _______________________________________________ oi-dev mailing list oi-dev@openindiana.org https://openindiana.org/mailman/listinfo/oi-dev