Am 17.03.2014 18:08, schrieb Blackcrack:
Testet now with an AMD 2x Core 64bit 6000+ / 4Gig Ram
80Gig/nvidia Fx 8600 :) OMLX build 2960
Installer works so far.
System reboot with the Installed System:
System stops behind :
[OK] Startet config read-only root support
_ <-blink
<stop>
:\
so not boot on real hardware ..
best regards
Blacky
install works .. not well, but works *s*
the boot can be make more better ,
i want indicate -> journal start and stops again and start ?? on
systemd .. *g*
need of improvement .. for faster booting up to X .. :)
so, now i test it on an intel single core 64bit .. 80Gig/nvidia Fx
8600 :)
best regards
Blacky
Am 17.03.2014 17:03, schrieb Blackcrack:
Ciao Davide,
you don't need to "plymouth.enable=0" , easy twice or 3th ESC-Key,
the escape key pressing and the plymouth go away .. try it out..
so, now i try it out also in 2 Systems, an vbox and on
intel-singlecore64bit
with changable hard disks slots :)
now download the iso :)
best regards
Blacky
Am 17.03.2014 15:36, schrieb [email protected]:
Thanks, i have tested build 2960 on two real systems (64bit)
https://drive.google.com/file/d/0B6QC6kfs4JvUU0FoLTM0dk56VVE/edit?usp=sharing
better, but we still need plymouth.enable=0 and i have problem with
system who have nvidia video cards.
Still problem with nvidia proprietary driver.
regards
---
Davide_01
http://www.linux-corner.it
Il 2014-03-17 13:45 Blackcrack ha scritto:
Hi Davide,
take a look :
https://abf.io/platforms/openmandriva2014.0/products/
the last who we was tested was the 2951
<https://abf.io/platforms/openmandriva2014.0/products/70/product_build_lists/2951>
<- this has not boot in Vbox
now it is a 2960 (Build complete) build there.. but in 15min i be
with my dad on an beer
in the near City for drinking a beer and walk around,
but later in an couple howers want testing the 2960 too :)
so many fun :)
best regards
Blacky
Am 17.03.2014 13:13, schrieb [email protected]:
There is a forecast for a new ISO?
I can not do any testing, on all systems I am not able to
perform a clean installation, or get to a desktop.
I'm going to wait next iso.
https://drive.google.com/file/d/0B6QC6kfs4JvUU0FoLTM0dk56VVE/edit?usp=sharing
Thank you.
---
Davide_01
http://www.linux-corner.it
Il 2014-03-16 23:42 Colin Close ha scritto:
Hi All
plymouth.enable=0 works for me too.
Plymouth is currently being updated
Best,
Colin
Colin Close
QA Team
On Sunday 16 Mar 2014 22:57:32 Tomasz Pawe? Gajc wrote:
Dnia niedziela, 16 marca 2014 22:30:48 luca pedrielli
pisze:
>> Please do the tesing, and fill DETAILED
bugreports on >> issues.openmandriva.org how can i
provide a DETAILED bugreports? in debug mode
messages scroll and i have no console access
In my case adding plymouth.enable=0 in boot parameters
does the trick and system boots Please try it