Hi Colin,

oky, on the next try, but ich think i have in the next couple day's ,
inc. Sunday really less time for helping and testing because,
i be at momnt on an hot phase who be want be edited ,
if i make crap , had i an job .. it's an personal thing between
my Buddy/Frend/Chef Steve and me, be in the factory eyes
and ears for him.. and others .. so.. i mus have my had
1. on F-R and later then on OMLx .. because later helps maybe
F-R, OMLx .. if works.. but now it's my work called on F-R
best regards
Blacky

Am 20.03.2014 23:07, schrieb Colin Close:
Blacky,
In case you are not monitoring the lists try removing all references to 
init=/lib/systemd/systemd from grub.cfg this should sort out the plymouth 
lockup.
Best,
Colin
On Monday 17 Mar 2014 18:46:26 Blackcrack wrote:
Am 17.03.2014 18:08, schrieb Blackcrack:

Testet now with an AMD 2x Core 64bit 6000+ / 4Gig Ram
   80Gig/nvidia Fx 8600  :) OMLX build 2960

Installer works so far.
System reboot with the Installed System:

System stops behind :
[OK] Startet config read-only root support
_ <-blink
<stop>

:\
so not boot on real hardware ..
best regards
Blacky

install works .. not well, but works *s*
the boot can be make more better ,
i want indicate ->  journal start and stops again and start ?? on
systemd .. *g*
need of improvement .. for faster booting up to X  .. :)

so, now i test it on an intel single core 64bit .. 80Gig/nvidia Fx
8600  :)

best regards
Blacky

Am 17.03.2014 17:03, schrieb Blackcrack:
Ciao Davide,

you don't need to "plymouth.enable=0" , easy twice or 3th ESC-Key,
the escape key pressing and the plymouth go away .. try it out..

so, now i try it out also in 2 Systems, an vbox and on
intel-singlecore64bit
with changable hard disks slots  :)

now download the iso :)
best regards
Blacky

Am 17.03.2014 15:36, schrieb [email protected]:
Thanks, i have tested build 2960 on two real systems (64bit)

https://drive.google.com/file/d/0B6QC6kfs4JvUU0FoLTM0dk56VVE/edit?usp=sharing

better, but we still need plymouth.enable=0 and i have problem with
system who have nvidia video cards.

Still problem with nvidia proprietary driver.

regards

---

Davide_01
http://www.linux-corner.it

Il 2014-03-17 13:45 Blackcrack ha scritto:

Hi Davide,

take a look :
https://abf.io/platforms/openmandriva2014.0/products/

the last who we was tested was the 2951
<https://abf.io/platforms/openmandriva2014.0/products/70/product_build_lists/2951>
<- this has not boot in Vbox

now it is a 2960 (Build complete) build there.. but in 15min i be
with my dad on an beer
in the near City for drinking a beer and walk around,
but later in an couple howers want testing the 2960 too :)

so many fun :)

best regards
Blacky

Am 17.03.2014 13:13, schrieb [email protected]:

     There is a forecast for a new ISO?


     I can not do any testing, on all systems I am not able to
     perform a clean installation, or get to a desktop.

     I'm going to wait next iso.

     
https://drive.google.com/file/d/0B6QC6kfs4JvUU0FoLTM0dk56VVE/edit?usp=sharing

     Thank you.

     ---

     Davide_01
     http://www.linux-corner.it

     Il 2014-03-16 23:42 Colin Close ha scritto:

         Hi All
         plymouth.enable=0 works for me too.
         Plymouth is currently being updated
         Best,
         Colin

         Colin Close
         QA Team

         On Sunday 16 Mar 2014 22:57:32 Tomasz Pawe? Gajc wrote:

             Dnia niedziela, 16 marca 2014 22:30:48 luca pedrielli
             pisze:

                 >> Please do the tesing, and fill DETAILED
                 bugreports on >> issues.openmandriva.org how can i
                 provide a DETAILED bugreports? in debug mode
                 messages scroll and i have no console access

             In my case adding plymouth.enable=0 in boot parameters
             does the trick and system boots Please try it














Reply via email to