Marcel, The time since the last check of the service2013-12-11 23:10:13
But it stills showing as "OK" even detecting that the status is down: Output of check pluginOK - [3] (down) MAC: 00:1b:17:6a:89:10, speed unknown, in: 0.00B/s, out: 0.00B/s [] Diego 2013/12/18 Marcel Schulte <[email protected]> > Hi Diego, > > When you watch the list of services in Multisite - does the "last checked" > column show a current time? > > Regards, Marcel > Am 18.12.2013 17:49 schrieb "Souza, Diego" <[email protected]>: > > Thank you Marcel. >> Running that debug I could see that the OMD server cannot reach the host >> with snmp, but the inventorizeds services are all OK (don't know why, since >> they are all via snmp). >> >> Thanks for the help. >> Diego >> >> >> 2013/12/18 Marcel Schulte <[email protected]> >> >>> Hi Diego, >>> >>> The Check_MK service stands for the cmk agent or the snmp agent. >>> Whenever a host is checked via snmp and/or cmk agent it gets that service. >>> Disabling the service means no cmk inventorized checks at all for the >>> host. >>> >>> Try running 'cmk --debug -nv HOSTNAME' to find out what fails regarding >>> snmp. >>> >>> HTH, Marcel >>> Am 18.12.2013 15:24 schrieb "Souza, Diego" <[email protected]>: >>> >>> Henry, >>>> >>>> Thank you for your reply. The host is already configured with the SNMP >>>> tag, I don't know why the check_mk service is being used. >>>> >>>> >>>> >>>> >>>> 2013/12/17 Henry Huang <[email protected]> >>>> >>>>> Diego, >>>>> >>>>> When you create a new host in Multisite (WATO), under the "host tag" >>>>> section, change the default agent type to either "SNMP" or "SNMP without >>>>> ping". And that way the OMD server will not be requesting the check_mk >>>>> service. >>>>> >>>>> Henry >>>>> >>>>> >>>>> On Tue, Dec 17, 2013 at 3:40 AM, Souza, Diego <[email protected] >>>>> > wrote: >>>>> >>>>>> Hi all, >>>>>> >>>>>> How can I disable Check_MK service? >>>>>> I am currently using OMD to monitor firewall interfaces, but the >>>>>> Check_MK service is telling me Incomplete or invalid response from >>>>>> SNMP agent, execution time 6.1 sec even when returning the correct >>>>>> values for each interface. There is a way to disable it? >>>>>> >>>>>> -- >>>>>> Diego Luiz de Souza >>>>>> >>>>>> _______________________________________________ >>>>>> omd-users mailing list >>>>>> [email protected] >>>>>> http://lists.mathias-kettner.de/mailman/listinfo/omd-users >>>>>> >>>>>> >>>>> >>>> >>>> >>>> -- >>>> Diego Luiz de Souza >>>> >>>> _______________________________________________ >>>> omd-users mailing list >>>> [email protected] >>>> http://lists.mathias-kettner.de/mailman/listinfo/omd-users >>>> >>>> >> >> >> -- >> Diego Luiz de Souza >> > -- Diego Luiz de Souza
_______________________________________________ omd-users mailing list [email protected] http://lists.mathias-kettner.de/mailman/listinfo/omd-users
