Folks,
as nobody replied success to this question,
Yesterday I was able to deploy the first virtual firewall following the
tutorial on a vanilla Openstack instance running on Ubuntu in an Softlayer
data center. For me and the team this represents the first mile stone as I
guess we are are pretty proud on it.
The next two steps would now be to get de.sh appc <module> to run. I run
in the same issue as described in
https://wiki.onap.org/questions/6591979/.demo.sh-appc-demomodule-returns-an-error-keyerror-tenantid
, but we do not run Contrail. So it may be a more general issue.
Step #2 is DCAE ... and I can see that DCAE controller uses a
Rackspace-specific request (at least it is not conforming to
https://developer.openstack.org/api-ref/identity/v2/). Anybody out there
who could point to to the place where this is defined (hard-coded or in a
config file) so that I can get a team member to adapt it to OpenStack?
Mit freundlichen Grüßen / Kind regards
Josef Reisinger
__________________
Hmm.. doesn't work really... Same for /opt/portal_install.sh... once
again my question: Anybody out there with sufficient luck to get an
vanilla openstack instance and run the demo examples? I think I read here
an there success stories and I wonder ... well.. I don't have the same
:-)
I used
ubuntu@vm1-vid:~$ cat /opt/vid_install.sh
<html>
<head>
<title>404 - Path
/org.openecomp.demo/boot/1.0.0-SNAPSHOT/vid_install.sh not found in local
storage of repository "raw" [id=raw]</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
<link rel="icon" type="image/png" href="
https://nexus.onap.org/favicon.png";>
<!--[if IE]>
<link rel="SHORTCUT ICON" href="https://nexus.onap.org/favicon.ico"/>
<![endif]-->
<link rel="stylesheet" href="
https://nexus.onap.org/static/css/Sonatype-content.css?2.14.2-01";
type="text/css" media="screen" title="no title" charset="utf-8">
</head>
<body>
<h1>404 - Path /org.openecomp.demo/boot/1.0.0-SNAPSHOT/vid_install.sh
not found in local storage of repository "raw" [id=raw]</h1>
<p>Path /org.openecomp.demo/boot/1.0.0-SNAPSHOT/vid_install.sh not
found in local storage of repository "raw" [id=raw]</p>
</body>
</html>
Mit freundlichen Grüßen / Kind regards
Josef Reisinger
When wisdom comes to call, there's nobody listening at all - Pendragon /
Man Of Nomadic Traits
IBM Sales & Distribution, Communications Sector
Certified IT-Architect Telecommunications
IBM Certified Telecommunications Industry ITA
Lehrbeauftragter an der Hochschule Fresenius
IBM Deutschland
Godesberger Allee 127
53175 Bonn Beuel
Phone: +49 151 1426 4559
Mobile: +49-(0) 151 1426 4559
E-Mail: [email protected]
The Open Group Master Certified IT Architect
Solution Advisor Cloud Computing
Architect Profession Certification - Level 2 Expert
Telecommunications Insights & Solutions
Public: IBM TME Solution Labs Flyer
Internal: IBM TME Solution Wiki
Internal: TME Demo Video Series
Internal: TME Demo App
IBM Deutschland GmbH / Vorsitzender des Aufsichtsrats: Martin Jetter
Geschäftsführung: Martina Koederitz (Vorsitzende), Nicole Reimer, Norbert
Janzen, Dr. Christian Keller, Ivo Koerner, Stefan Lutz
Sitz der Gesellschaft: Ehningen / Registergericht: Amtsgericht Stuttgart,
HRB 14562 / WEEE-Reg.-Nr. DE 99369940
From: "FORSYTH, JAMES" <[email protected]>
To: Josef Reisinger <[email protected]>
Cc: "ROSE, DANIEL V" <[email protected]>, "LUND, CARSTEN"
<[email protected]>, "[email protected]"
<[email protected]>, "KAJUR, HARISH V" <[email protected]>
Date: 13.06.2017 17:27
Subject: RE: [onap-discuss] A maybe dump questions, but has anybody
...
Hi, Josef,
Yes, definitely.
-jimmy
From: Josef Reisinger [mailto:[email protected]]
Sent: Tuesday, June 13, 2017 11:25 AM
To: FORSYTH, JAMES <[email protected]>
Cc: ROSE, DANIEL V <[email protected]>; LUND, CARSTEN
<[email protected]>; [email protected]; KAJUR, HARISH V
<[email protected]>
Subject: RE: [onap-discuss] A maybe dump questions, but has anybody ...
Thanks James,
that sounds absolutely reasonable and I tried adapt the docker version to
1.1.. which didn't give me a working portal. So left it as it was
pre-configured in the template and trusted the comment "You don'T need to
change other parameters" (or similar...).
Do you think artifacts_version: 1.0.0-SNAPSHOT + docker_version:
1.0-STAGING-latest + gerrit_branch: release-1.0.0 will enhance the chance
to get the ONAP stack working?
Mit freundlichen Grüßen / Kind regards
Josef Reisinger
When wisdom comes to call, there's nobody listening at all - Pendragon /
Man Of Nomadic Traits
IBM Sales & Distribution, Communications Sector
Certified IT-Architect Telecommunications
IBM Certified Telecommunications Industry ITA
Lehrbeauftragter an der Hochschule Fresenius
IBM Deutschland
Godesberger Allee 127
53175 Bonn Beuel
Phone: +49 151 1426 4559
Mobile: +49-(0) 151 1426 4559
E-Mail: [email protected]
IBM Deutschland GmbH / Vorsitzender des Aufsichtsrats: Martin Jetter
Geschäftsführung: Martina Koederitz (Vorsitzende), Nicole Reimer, Norbert
Janzen, Dr. Christian Keller, Ivo Koerner, Stefan Lutz
Sitz der Gesellschaft: Ehningen / Registergericht: Amtsgericht Stuttgart,
HRB 14562 / WEEE-Reg.-Nr. DE 99369940
From: "FORSYTH, JAMES" <[email protected]>
To: "ROSE, DANIEL V" <[email protected]>, "LUND, CARSTEN" <
[email protected]>, Josef Reisinger <[email protected]>, "
[email protected]" <[email protected]>, "KAJUR, HARISH
V" <[email protected]>
Date: 13.06.2017 17:00
Subject: RE: [onap-discuss] A maybe dump questions, but has anybody
...
If you use the 1.1.0-SNAPSHOT artifacts, and the 1.0-STAGING-latest docker
image, you will get a mismatch in the table name. 1.0 uses
?vid_openecomp? and 1.1 uses ?vid_openecomp_epsdk?
Thanks,
jimmy
From: ROSE, DANIEL V
Sent: Tuesday, June 13, 2017 10:51 AM
To: LUND, CARSTEN <[email protected]>; Josef Reisinger <
[email protected]>; [email protected]; FORSYTH, JAMES <
[email protected]>; KAJUR, HARISH V <[email protected]>
Subject: RE: [onap-discuss] A maybe dump questions, but has anybody ...
Sorry wrong thread for my previous reply!
For robot vm we updated it to use tenant name (follow
https://jira.onap.org/browse/TEST-28to see its testing progress)
For vid jimmy can you check this?
For aai can you check this harish?
I think we figure out if its due to rebasing or not.
Daniel Rose
ECOMP / ONAP
com.att.ecomp
732-420-7308
From: [email protected][
mailto:[email protected]] On Behalf Of ROSE, DANIEL V
Sent: Tuesday, June 13, 2017 10:36 AM
To: LUND, CARSTEN <[email protected]>; Josef Reisinger <
[email protected]>; [email protected]
Subject: Re: [onap-discuss] A maybe dump questions, but has anybody ...
***Security Advisory: This Message Originated Outside of AT&T ***
Reference http://cso.att.com/EmailSecurity/IDSP.htmlfor more information.
You could ask someone from aai like Harish, Jimmy or Manisha as they also
use Spotify
Daniel Rose
ECOMP / ONAP
com.att.ecomp
732-420-7308
From: [email protected][
mailto:[email protected]] On Behalf Of LUND, CARSTEN
Sent: Tuesday, June 13, 2017 8:53 AM
To: Josef Reisinger <[email protected]>;
[email protected]
Subject: Re: [onap-discuss] A maybe dump questions, but has anybody ...
***Security Advisory: This Message Originated Outside of AT&T ***
Reference http://cso.att.com/EmailSecurity/IDSP.htmlfor more information.
For DCAE issue see DCAE-7. We are still working that and then have to
document things better.
Carsten
From: [email protected][
mailto:[email protected]] On Behalf Of Josef Reisinger
Sent: Tuesday, June 13, 2017 8:48 AM
To: [email protected]
Subject: [onap-discuss] A maybe dump questions, but has anybody ...
... got the ONAP stack to work on vanilla Openstack (We use Ocata)
including running one demo from the tutorial using the HEAT template below
without manual intervention? The only changes I made are the lines where
the parameter values start with "PUT YOUR <xyz value> HERE" or so. I did
especially not change any of
artifacts_version: 1.1.0-SNAPSHOT
docker_version: 1.0-STAGING-latest
gerrit_branch: release-1.0.0
I am asking since I get a lot of issues which I do not believe to relate
to the fact we are on vanilla Openstack Ocata vs. Rackspace as there are:
Robot VM: I need to modify a couple of files to talk to the correct
keystone endpoint, use the correct JSON in the token request and avoid SSL
issues; After the manual config I get it to run demo.sh init
VID VM: There is still some confusion on the database name to use as it
seems. If I edit two files and remove the _epsdk from the DB name, at
least the vid-mariadb container comes up and I can open the VID tab in the
portal.
A&AI: during install, I get a message that the aai/test-config project
does not have a branch release-1.0.0 and the install is broken; if I
change /opt/config/gerrit_branch.txt to contain "master", I can get AAI to
run the docker images. (Btw, setting gerrit_branch to "master" in the HEAT
file didn't give me working environment)
model-router exits after a few seconds run ... docker logs gives a
one-liner "starting model-loader", the log-directory
/opt/aai/logroot/AAI-MODEL-LOADER/is empty
DCAE: if I look in the logs of dcaestartupvmcontroller_dcae-controller_1
I find lots of '"exception": "java.lang.IllegalArgumentException:
!Absolute URI: null/servers"'
Tutorial: After fixing all the stuff above, I started the tutorial (which
now has some licenses and VF added, cool!), but when I try to deploy one
of them, there is not user pre-configured as it was before. Asking AAI
with a REST call returns one:
curl -k "-HX-TransactionId:$(uuidgen)" "-HX-FromAppId: test"
"-HAccept:application/json"
https://AAI:AAI@vm1-aai1:8443/aai/v8/business/customers/customer/|json_pp
{
"subscriber-type" : "INFRA",
"resource-version" : "1497351232556",
"global-customer-id" : "Demonstration",
"subscriber-name" : "Demonstration",
"service-subscriptions" : {
"service-subscription" : [
{
"resource-version" : "1497351232629",
"service-type" : "vLB",
"relationship-list" : {
"relationship" : [
{
"relationship-data" : [
{
"relationship-key" : "cloud-region.cloud-owner",
"relationship-value" : "Rackspace"
},
{
"relationship-key" :
"cloud-region.cloud-region-id",
"relationship-value" : "RegionOne"
},
{
"relationship-key" : "tenant.tenant-id",
"relationship-value" :
"a90952b7994341f4951fb5e97f829d0d"
}
],
"related-to" : "tenant",
"related-link" : "
https://vm1-aai1:8443/aai/v8/cloud-infrastructure/cloud-regions/cloud-region/Rackspace/RegionOne/tenants/tenant/a90952b7994341f4951fb5e97f829d0d
",
"related-to-property" : [
{
"property-key" : "tenant.tenant-name",
"property-value" : "admin"
}
]
}
]
}
},
{
"resource-version" : "1497351232580",
"relationship-list" : {
"relationship" : [
{
"related-to" : "tenant",
"related-link" : "
https://vm1-aai1:8443/aai/v8/cloud-infrastructure/cloud-regions/cloud-region/Rackspace/RegionOne/tenants/tenant/a90952b7994341f4951fb5e97f829d0d
",
"related-to-property" : [
{
"property-key" : "tenant.tenant-name",
"property-value" : "admin"
}
],
"relationship-data" : [
{
"relationship-key" : "cloud-region.cloud-owner",
"relationship-value" : "Rackspace"
},
{
"relationship-value" : "RegionOne",
"relationship-key" :
"cloud-region.cloud-region-id"
},
{
"relationship-key" : "tenant.tenant-id",
"relationship-value" :
"a90952b7994341f4951fb5e97f829d0d"
}
]
}
]
},
"service-type" : "vFW"
}
]
}
}
Now, the question is: Did I do something terribly wrong or do you know the
few modifications and/or tips & tricks to be made to get the ONAP stack
and demos working on vanilla Openstack?
Mit freundlichen Grüßen / Kind regards
Josef Reisinger
From: "PLATANIA, MARCO (MARCO)" <[email protected]>
To: "[email protected]" <[email protected]>
Date: 09.06.2017 15:25
Subject: [onap-discuss] [installation] Heat template and
instructions to run DCAE in vanilla OpenStack
Sent by: [email protected]
All,
I updated the wiki page about ONAP installation in vanilla OpenStack:
https://wiki.onap.org/display/DW/ONAP+Installation+in+Vanilla+OpenStack
There?s a new paragraph (in blue) that highlights the necessary steps to
run DCAE in OpenStack. Please use the following templates for
installation: onap_openstack_float.yamland onap_openstack_float.env
Note, however, that DCAE team is still working on a DNS issue within the
DCAE collector docker container. The issue is tracked in this Jira:
https://jira.onap.org/browse/DCAE-7
Finally, the Heat templates linked above include the new A&AI
configurations. A&AI now has 2 VMs: one has the docker containers that run
the A&AI logic and one has databases and third-party software
dependencies.
Thanks,
Marco
_______________________________________________
onap-discuss mailing list
[email protected]
https://lists.onap.org/mailman/listinfo/onap-discuss
_______________________________________________
onap-discuss mailing list
[email protected]
https://lists.onap.org/mailman/listinfo/onap-discuss
![https://nexus.onap.org/favicon.png"](https://nexus.onap.org/favicon.png"){kind=link}