Hi Josef,

Sure, that will be helpful.

And in vfw templates the first interface is attached to external network.
Most probably they are not DHCP enabled. So I don't think the eth0 ip will
have an IP. Did you face this issue?

Cheers
Shankar

On 25-Jul-2017 1:57 PM, "Josef Reisinger" <josef.reisin...@de.ibm.com>
wrote:

> Hi Shakar,
> yes, I installed an plain 1.0.0 ONAP up to the point where I needed the
> closed loop functionality and installed 1.1.0 DCAE controller (I think I
> did it manually on top of the existing DCAE controller...). After that, the
> other VMs came up. Reg. standalone DCAE, not sure what you mean by this,
> but I assume you can send the stream from vNF to DCAE collector.. You need
> to make sure that you have the right ip address of the collector in the
> config of the vNF (in my case, the vFW, the "middle" VM) to send the data
> to. In addition, you need also to make sure that the standalone DCAE is
> correctly configured to talk to policy (as far as I remember).
> I will have the change to do it in the next few days... I think I will
> document the steps and add them to the Wiki.
>
> Mit freundlichen Grüßen / Kind regards
> *Josef Reisinger*
>
>
>
> From:        Cipher Cipher <cipher.for.programm...@gmail.com>
> To:        Josef Reisinger <josef.reisin...@de.ibm.com>
> Cc:        onap-discuss-boun...@lists.onap.org,
> onap-discuss@lists.onap.org, "Michael O'Brien" <frank.obr...@amdocs.com>
> Date:        25.07.2017 10:13
> Subject:        Re: [onap-discuss] [DCAE] DCAE 1.0.0
> ------------------------------
>
>
>
> Hi Josef,
>
> You meant, you are running ONAP setup with DCAE-1.1 and all other
> components in 1.0.0? Is that right Josef?
>
> One more question, can we have standalone setup of DCAE and send streams
> from VNF to DCAE VES collector?
>
> Cheers
> Shankar
>
> On 25-Jul-2017 1:27 PM, "Josef Reisinger" <*josef.reisin...@de.ibm.com*
> <josef.reisin...@de.ibm.com>> wrote:
> Shakar,
> we did exactly as you mentioned .. just run DCAE 1.1.0 on otherwise
> docker-1.0 images it works.
>
> Mit freundlichen Grüßen / Kind regards
> *Josef Reisinger*
>
>
>
> From:        Cipher Cipher <*cipher.for.programm...@gmail.com*
> <cipher.for.programm...@gmail.com>>
> To:        "Michael O'Brien" <*frank.obr...@amdocs.com*
> <frank.obr...@amdocs.com>>
> Cc:        *onap-discuss@lists.onap.org* <onap-discuss@lists.onap.org>
> Date:        25.07.2017 09:29
> Subject:        Re: [onap-discuss] [DCAE] DCAE 1.0.0
> Sent by:        *onap-discuss-boun...@lists.onap.org*
> <onap-discuss-boun...@lists.onap.org>
> ------------------------------
>
>
>
> Hi Michael/Marco,
>
> Thanks for the input. Can you throw some light why DCAE functionality
> depends up on underlying cloud(racks pace or vanilla openstack)? And can we
> just replace DCAE-1.0.0 with the latest and keeping rest of the components
> as it is? Will there be any api endpoint mismatch if we use above approach?
>
> Cheers
> Shankar
>
> On 25-Jul-2017 3:55 AM, "Michael O'Brien" <*frank.obr...@amdocs.com*
> <frank.obr...@amdocs.com>> wrote:
>
> Shankar,
>
>    Hi, as Marco mentions in a 1.0.0 ONAP environment DCAE only works in
> Rackspace so far, in 1.1 it works in both.
>
>    We had a similar question on the 18th from Serkant.  I checked the
> page below in anticipation of editing it but I will leave the clause as-is
>
>
>
> DCAE-VERSION 1.1.0 Note only 1.1.0 version is working outside of Rackspace
>
>
>
>    There is a video of closed-loop (requires DCAE) for 1.0.0 on Rackspace
> at
>
> *https://wiki.onap.org/display/DW/Installing+and+Running+the+ONAP+Demos*
> <https://wiki.onap.org/display/DW/Installing+and+Running+the+ONAP+Demos>
>
> Closed loop partial details
>
>
> *https://wiki.onap.org/display/DW/Tutorial%3A+Verifying+and+Observing+a+deployed+Service+Instance*
> <https://wiki.onap.org/display/DW/Tutorial%3A+Verifying+and+Observing+a+deployed+Service+Instance>
>
>    thank you
>
>    /michael
>
>
>
>
>
> *From:* *onap-discuss-boun...@lists.onap.org*
> <onap-discuss-boun...@lists.onap.org>[mailto:
> *onap-discuss-boun...@lists.onap.org*
> <onap-discuss-boun...@lists.onap.org>] *On Behalf Of *PLATANIA, MARCO
> (MARCO)
> *Sent:* Monday, July 24, 2017 16:02
> *To:* Cipher Cipher <*cipher.for.programm...@gmail.com*
> <cipher.for.programm...@gmail.com>>; *onap-discuss@lists.onap.org*
> <onap-discuss@lists.onap.org>
> *Subject:* Re: [onap-discuss] [DCAE] DCAE 1.0.0
>
>
>
> Hello Shankar,
>
>
>
> You are right. DCAE (and MSO) have been modified to work in vanilla
> OpenStack since seed code 1.1.0 (current master branch). Seed code release
> 1.0.0 supports Rackspace only.
>
>
>
> Please refer to the wiki page below for information about ONAP
> installation in vanilla OpenStack:
> *https://wiki.onap.org/display/DW/ONAP+Installation+in+Vanilla+OpenStack*
> <https://wiki.onap.org/display/DW/ONAP+Installation+in+Vanilla+OpenStack>
>
>
>
> Thanks,
>
> Marco
>
>
>
>
>
> *From: *<*onap-discuss-boun...@lists.onap.org*
> <onap-discuss-boun...@lists.onap.org>> on behalf of Cipher Cipher <
> *cipher.for.programm...@gmail.com* <cipher.for.programm...@gmail.com>>
> *Date: *Monday, July 24, 2017 at 3:08 PM
> *To: *"*onap-discuss@lists.onap.org* <onap-discuss@lists.onap.org>" <
> *onap-discuss@lists.onap.org* <onap-discuss@lists.onap.org>>
> *Subject: *[onap-discuss] [DCAE] DCAE 1.0.0
>
>
>
> Hey,
>
>
>
> According to the DCAE controller guide(
> *https://wiki.onap.org/display/DW/DCAE+Controller+Development+Guide*
> <https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_DCAE-2BController-2BDevelopment-2BGuide&d=DwMFaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=KgFIQiUJzSC0gUhJaQxg8eC3w16GC3sKgWIcs4iIee0&m=cpf7fEpKw4eGoxszA_SApKcgwdf-r3IUdTWJKDLVaTI&s=92wpqMU1NYxeq7qqkzMvxyRFAxsAjtakdGuDHCSjwkI&e=>),
> it doesn't work in release-1.0.0. But I have already ONAP release-1.0.0 up
> and running, so to make DCAE working, we have to replace ONAP with new
> version? or is there any alternatives?
>
>
>
> Cheers
>
> Shankar
>
> This message and the information contained herein is proprietary and
> confidential and subject to the Amdocs policy statement,
> you may review at *https://www.amdocs.com/about/email-disclaimer*
> <https://www.amdocs.com/about/email-disclaimer>______________
> _________________________________
> onap-discuss mailing list
> *onap-discuss@lists.onap.org* <onap-discuss@lists.onap.org>
> *https://lists.onap.org/mailman/listinfo/onap-discuss*
> <https://lists.onap.org/mailman/listinfo/onap-discuss>
>
>
>
>
_______________________________________________
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Reply via email to