Turns out I was not the last one editing this diagram, so I don't have the 
up-to-date source.
Whoever has it - please either make the change or send me the link to the 
source of the diagram so I can make the change.

Thanks,
Yoav Kluger
Amdocs Technology
+1(201)912-7294
+972-54-4850278
[amdocs-a]

From: Kang Xi [mailto:kang...@huawei.com]
Sent: Thursday, October 05, 2017 6:03 PM
To: Yoav Kluger <yoav.klu...@amdocs.com>; onap-discuss 
<onap-discuss@lists.onap.org>
Subject: RE: vCPE closed loop testing session

Yoav,

Thanks for the info. Very important.
--------------------------------------------------
Regards,
Kang
From:Yoav Kluger
To:Kang Xi,onap-discuss,
Date:2017-10-05 17:39:29
Subject:RE: vCPE closed loop testing session

Kang,

Just a small correction in steps 5 and 6 below:
5.      Policy process the event from DCAE, queries AAI to obtain the vServer 
ID, and sends a "restart" event to APPC through DMaaP with the vServerID as a 
parameter
6.       APPC captures the event from Policy, and restarts the VM according to 
the vServerID received from Policy

We were initially going to have APPC query AAI to get the vServerID, but it 
then turned out that APPC would not be able to do this for R1 so Policy will do 
it as it does today in the vFW use case. Hopefully APPC is able to do the query 
in R2 so we will go back to how we wanted to do this originally, which is more 
"right".

I think the wiki still has it the original way - I will update.

Thanks,
Yoav Kluger
Amdocs Technology
+1(201)912-7294
+972-54-4850278
[cid:image002.jpg@01D34123.EEBD71D0]


-----Original Appointment-----
From: Kang Xi [mailto:kang...@huawei.com]
Sent: Thursday, October 05, 2017 3:58 PM
To: onap-discuss
Subject: [onap-discuss] vCPE closed loop testing session
When: Friday, October 06, 2017 1:00 PM-4:00 PM (UTC-05:00) Eastern Time (US & 
Canada).
Where: https://zoom.us/j/4466667777


Hi DCAE, CLAMP, Policy, APPC, AAI,

Please join this session to kick off vCPE closed loop testing. The environment 
is in the community open lab. Marco has installed ONAP under integration 
project. Vijay has manually set up DCAE VES collector and TCA and has verified 
that they are working.

We will create a vGMUX VM for this testing. What to be tested include the 
following:
1.      Design and load policy rules t policy engine. Ideally this should be 
done by CLAMP. In case of problems, the workaround is to use Policy GUI.
2.      Preload AAI with vCPE data. The purpose is to lookup vServer using 
vGMUX VNF ID.
3.      vGMUX sends packet loss VES to DCAE VES collector
4.       DCAE TCA sends an event to Policy through DMaaP
1.       Policy process the event from DCAE and sends a "restart" event to APPC 
through DMaaP
1.       APPC captures the event from Policy, extracts the VNF ID from the 
event, queries AAI to obtain the vServer ID, and then restarts the VM

If you have not yet obtained access to the open lab, please open a jira ticket 
and assign it to Stephen Gooch to request one. Once you get your account, you 
can set up an OpenVPN connection to the lab and access all the resources there.

Thanks,
Kang

  << File: ATT00001.txt >>

This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,
you may review at https://www.amdocs.com/about/email-disclaimer
This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,

you may review at https://www.amdocs.com/about/email-disclaimer 
<https://www.amdocs.com/about/email-disclaimer>
_______________________________________________
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Reply via email to