>From the log it looks like its Incompatible auto!. Make sure you set both endpoints to be the same say allow only one format then try and see if you get the same results
-----Original Message----- From: manish varma [mailto:[EMAIL PROTECTED] Sent: 30 November 2005 16:33 To: ooh323c-devel@lists.sourceforge.net Subject: [ooh323c-devel] (no subject) Hi all, We are trying to make ooh323c-0.8 on Atmel AT75C221 work with VOIP unit from ivatsu and not been able to establish call.. we verified H225 signaling seems to be ok but problem is during H245 messages.. When we checked the log we found these messages: 00:01:42:450 Looking for matching capabilities. (outgoing, ooh323c_o_1) 00:01:42:490 ERROR:Incompatible audio capabilities - Can not open audio channel (outgoing, ooh323c_o_1) 00:01:42:490 ERROR:Failed to open audio channels. Clearing call.(outgoing, ooh323c_o_1) 00:01:42:500 Finished handling H245 message. (outgoing, ooh323c_o_1) Though we are able to make call with sjphone, we are some how not been able to call and call ends as we are not able to open the channels.. I am here below attaching the entire log file if any one finds it necessary to go thru: 00:00:33:830 Signalling IP address is set to 192.168.2.26 00:00:33:830 Listen port number is set to 1720 00:00:33:840 Creating CMD listener at 192.168.2.26:7575 00:00:33:850 CMD listener creation - successful 00:00:33:850 Added alias: H323ID - intrigue 00:00:33:850 Added alias: DialedDigits - 200 00:00:33:860 Dtmf mode set to H.245(alphanumeric) for endpoint 00:00:33:860 Dtmf mode set to H.245(signal) for endpoint 00:00:33:860 Enabled RFC2833 DTMF capability for end-point 00:00:33:860 Adding endpoint capability OO_G711ALAW64K. 00:00:35:050 H323 listener creation - successful 00:00:35:140 H.323 Endpoint Configuration is as follows: 00:00:35:140 \0x09Trace File: /var/simple.log 00:00:35:150 \0x09FastStart - disabled 00:00:35:150 \0x09H245 Tunneling - enabled 00:00:35:150 \0x09AutoAnswer - disabled 00:00:35:160 \0x09Terminal Type - 50 00:00:35:160 \0x09T35 CountryCode - 1 00:00:35:160 \0x09T35 Extension - 0 00:00:35:170 \0x09Manufacturer Code - 71 00:00:35:170 \0x09ProductID - objsys 00:00:35:170 \0x09VersionID - v0.8 00:00:35:180 \0x09Local signalling IP address - 192.168.2.26 00:00:35:180 \0x09H225 ListenPort - 1720 00:00:35:180 \0x09CallerID - VOIP-8 00:00:35:230 \0x09Call Establishment Timeout - 60 seconds 00:00:35:230 \0x09MasterSlaveDetermination Timeout - 30 seconds 00:00:35:240 \0x09TerminalCapabilityExchange Timeout - 30 seconds 00:00:35:240 \0x09LogicalChannel Timeout - 30 seconds 00:00:35:240 \0x09Session Timeout - 15 seconds 00:00:52:000 Cmd connection accepted 00:00:53:010 Processing MakeCall command ooh323c_o_1 00:00:53:010 Created a new call (outgoing, ooh323c_o_1) 00:00:53:020 Configured mediainfo for cap OO_G711ALAW64K (outgoing, ooh323c_o_1) 00:00:53:020 Configured mediainfo for cap OO_G711ALAW64K (outgoing, ooh323c_o_1) 00:00:53:020 Parsing destination [EMAIL PROTECTED] 00:00:53:030 Destination is parsed as dialed digits 202 00:00:53:040 Generated callRef 78 00:00:53:040 Trying to connect to remote endpoint(192.168.2.115:1720) to setup H2250 channel (outgoing, ooh323c_o_1) 00:00:53:050 H2250 transmiter channel creation - succesful (outgoing, ooh323c_o_1) 00:00:53:090 Built SETUP message (outgoing, ooh323c_o_1) 00:00:53:130 UserInfo encoding - successful 00:00:53:170 Q931 Message = { 00:00:53:170 protocolDiscriminator = 8 00:00:53:180 callReference = 78 00:00:53:180 from = originator 00:00:53:180 messageType = 5 00:00:53:180 Bearer-Capability IE = { 00:00:53:230 88, 90, a5 } 00:00:53:270 Display IE = { 00:00:53:270 VOIP-8 00:00:53:270 } 00:00:53:310 CallingPartyNumber IE = { 00:00:53:310 200 00:00:53:310 } 00:00:53:310 CalledPartyNumber IE = { 00:00:53:350 202 00:00:53:350 } 00:00:53:360 h323_uu_pdu = { 00:00:53:370 h323_message_body = { 00:00:53:410 setup = { 00:00:53:510 protocolIdentifier = { 00:00:53:610 { 00:00:53:650 0 0 8 2250 0 4 } 00:00:53:790 } 00:00:53:870 sourceAddress = { 00:00:53:940 elem[0] = { 00:00:53:980 dialedDigits = { 00:00:54:020 "200" 00:00:54:070 } 00:00:54:110 } 00:00:54:150 elem[1] = { 00:00:54:190 h323_ID = { 00:00:54:230 intrigue 00:00:54:300 } 00:00:54:340 } 00:00:54:370 } 00:00:54:400 sourceInfo = { 00:00:54:430 vendor = { 00:00:54:470 vendor = { 00:00:54:510 t35CountryCode = { 00:00:54:570 1 00:00:54:620 } 00:00:54:850 t35Extension = { 00:00:55:020 0 00:00:55:130 } 00:00:55:270 manufacturerCode = { 00:00:55:450 71 00:00:55:640 } 00:00:55:800 } 00:00:55:870 productId = { 00:00:56:010 '6f626a737973'H 00:00:56:120 } 00:00:56:320 versionId = { 00:00:56:490 '76302e38'H 00:00:56:580 } 00:00:56:620 } 00:00:56:650 terminal = { 00:00:56:690 } 00:00:56:870 mc = { 00:00:57:050 FALSE 00:00:57:150 } 00:00:57:220 undefinedNode = { 00:00:57:260 FALSE 00:00:57:370 } 00:00:57:460 } 00:00:57:490 destinationAddress = { 00:00:57:520 elem[0] = { 00:00:57:560 dialedDigits = { 00:00:57:610 "202" 00:00:57:650 } 00:00:57:690 } 00:00:57:860 } 00:00:57:990 destCallSignalAddress = { 00:00:58:080 ipAddress = { 00:00:58:220 ip = { 00:00:58:390 'c0a80273'H 00:00:58:610 } 00:00:58:730 port = { 00:00:58:910 1720 00:00:59:050 } 00:00:59:150 } 00:00:59:250 } 00:00:59:350 activeMC = { 00:00:59:460 FALSE 00:00:59:500 } 00:00:59:530 conferenceID = { 00:00:59:560 '0102030405060708090a0b0c0d0e0f10'H 00:00:59:600 } 00:00:59:630 conferenceGoal = { 00:00:59:660 create = { 00:00:59:700 NULL 00:00:59:740 } 00:00:59:930 } 00:00:59:960 callType = { 00:00:59:990 pointToPoint = { 00:01:00:030 NULL 00:01:00:070 } 00:01:00:100 } 00:01:00:130 sourceCallSignalAddress = { 00:01:00:160 ipAddress = { 00:01:00:200 ip = { 00:01:00:240 'c0a8021a'H 00:01:00:300 } 00:01:00:340 port = { 00:01:00:380 12031 00:01:00:430 } 00:01:00:470 } 00:01:00:510 } 00:01:00:530 callIdentifier = { 00:01:00:570 guid = { 00:01:00:600 '6f6f68333233632d469d1f0000000000'H 00:01:00:650 } 00:01:00:690 } 00:01:00:720 mediaWaitForConnect = { 00:01:00:750 FALSE 00:01:00:780 } 00:01:00:990 canOverlapSend = { 00:01:01:080 FALSE 00:01:01:110 } 00:01:01:140 multipleCalls = { 00:01:01:170 FALSE 00:01:01:210 } 00:01:01:240 maintainConnection = { 00:01:01:270 FALSE 00:01:01:310 } 00:01:01:450 presentationIndicator = { 00:01:01:570 presentationAllowed = { 00:01:01:690 NULL 00:01:01:870 } 00:01:02:000 } 00:01:02:110 screeningIndicator = { 00:01:02:170 0 00:01:02:270 } 00:01:02:300 } 00:01:02:320 } 00:01:02:340 h245Tunneling = { 00:01:02:360 TRUE 00:01:02:380 } 00:01:02:390 } 00:01:02:400 UUIE decode successful 00:01:02:410 } 00:01:02:410 Queued H225 messages 1. (outgoing, ooh323c_o_1) 00:01:02:480 Sending H225 message (outgoing, ooh323c_o_1) 00:01:02:490 Sending Q931 message (outgoing, ooh323c_o_1) 00:01:02:490 H2250/Q931 Message sent successfully (outgoing, ooh323c_o_1) 00:01:02:530 Sent Message - Setup (outgoing, ooh323c_o_1) 00:01:02:610 Receiving H.2250 message (outgoing, ooh323c_o_1) 00:01:02:610 Received Q.931 message: (outgoing, ooh323c_o_1) 00:01:02:610 Received H.2250 Message = { 00:01:02:650 protocolDiscriminator = 8 00:01:02:650 callReference = 78 00:01:02:660 from = destination 00:01:02:690 messageType = 2 00:01:02:730 h323_uu_pdu = { 00:01:02:740 h323_message_body = { 00:01:02:810 callProceeding = { 00:01:02:880 protocolIdentifier = { 00:01:02:990 { 00:01:03:120 0 0 8 2250 0 4 } 00:01:03:140 } 00:01:03:230 destinationInfo = { 00:01:03:340 vendor = { 00:01:03:470 vendor = { 00:01:03:650 t35CountryCode = { 00:01:03:870 11 00:01:04:100 } 00:01:04:240 t35Extension = { 00:01:04:290 11 00:01:04:350 } 00:01:04:390 manufacturerCode = { 00:01:04:440 11 00:01:04:500 } 00:01:04:540 } 00:01:04:590 productId = { 00:01:04:630 '4d756c7469566f4950'H 00:01:04:680 } 00:01:04:720 versionId = { 00:01:04:770 '483332332d5634'H 00:01:04:820 } 00:01:05:010 } 00:01:05:050 terminal = { 00:01:05:090 } 00:01:05:120 mc = { 00:01:05:160 FALSE 00:01:05:200 } 00:01:05:240 undefinedNode = { 00:01:05:270 FALSE 00:01:05:320 } 00:01:05:510 } 00:01:05:570 callIdentifier = { 00:01:05:660 guid = { 00:01:05:790 '6f6f68333233632d469d1f0000000000'H 00:01:05:840 } 00:01:05:950 } 00:01:06:030 multipleCalls = { 00:01:06:150 FALSE 00:01:06:300 } 00:01:06:390 maintainConnection = { 00:01:06:480 TRUE 00:01:06:590 } 00:01:06:710 } 00:01:06:790 } 00:01:06:850 h245Tunneling = { 00:01:06:900 FALSE 00:01:06:980 } 00:01:07:030 } 00:01:07:030 UUIE decode successful 00:01:07:070 Decoded Q931 message (outgoing, ooh323c_o_1) 00:01:07:070 } 00:01:07:110 H.225 Call Proceeding message received (outgoing, ooh323c_o_1) 00:01:07:110 Receiving H.2250 message (outgoing, ooh323c_o_1) 00:01:07:120 Received Q.931 message: (outgoing, ooh323c_o_1) 00:01:07:120 Received H.2250 Message = { 00:01:07:120 protocolDiscriminator = 8 00:01:07:130 callReference = 78 00:01:07:130 from = destination 00:01:07:130 messageType = 1 00:01:07:140 h323_uu_pdu = { 00:01:07:150 h323_message_body = { 00:01:07:170 alerting = { 00:01:07:200 protocolIdentifier = { 00:01:07:230 { 00:01:07:260 0 0 8 2250 0 4 } 00:01:07:280 } 00:01:07:310 destinationInfo = { 00:01:07:340 vendor = { 00:01:07:580 vendor = { 00:01:07:710 t35CountryCode = { 00:01:07:850 11 00:01:07:910 } 00:01:07:960 t35Extension = { 00:01:08:010 11 00:01:08:070 } 00:01:08:110 manufacturerCode = { 00:01:08:160 11 00:01:08:220 } 00:01:08:270 } 00:01:08:310 productId = { 00:01:08:350 '4d756c7469566f4950'H 00:01:08:410 } 00:01:08:450 versionId = { 00:01:08:490 '483332332d5634'H 00:01:08:540 } 00:01:08:580 } 00:01:08:620 terminal = { 00:01:08:660 } 00:01:08:690 mc = { 00:01:08:730 FALSE 00:01:08:770 } 00:01:08:810 undefinedNode = { 00:01:08:840 FALSE 00:01:08:970 } 00:01:09:080 } 00:01:09:180 callIdentifier = { 00:01:09:270 guid = { 00:01:09:410 '6f6f68333233632d469d1f0000000000'H 00:01:09:590 } 00:01:09:710 } 00:01:09:810 multipleCalls = { 00:01:09:900 FALSE 00:01:10:020 } 00:01:10:070 maintainConnection = { 00:01:10:170 TRUE 00:01:10:300 } 00:01:10:390 presentationIndicator = { 00:01:10:520 presentationAllowed = { 00:01:10:630 NULL 00:01:10:810 } 00:01:10:910 } 00:01:10:970 screeningIndicator = { 00:01:11:100 2 00:01:11:210 } 00:01:11:310 } 00:01:11:390 } 00:01:11:470 h245Tunneling = { 00:01:11:550 FALSE 00:01:11:570 } 00:01:11:660 } 00:01:11:670 UUIE decode successful 00:01:11:670 Decoded Q931 message (outgoing, ooh323c_o_1) 00:01:11:670 } 00:01:11:710 H.225 Alerting message received (outgoing, ooh323c_o_1) 00:01:15:640 Receiving H.2250 message (outgoing, ooh323c_o_1) 00:01:15:650 Received Q.931 message: (outgoing, ooh323c_o_1) 00:01:15:650 Received H.2250 Message = { 00:01:15:650 protocolDiscriminator = 8 00:01:15:660 callReference = 78 00:01:15:660 from = destination 00:01:15:660 messageType = 7 00:01:15:670 Display IE = { 00:01:15:670 VOIP-1 00:01:15:670 } 00:01:15:680 h323_uu_pdu = { 00:01:15:690 h323_message_body = { 00:01:15:740 connect = { 00:01:15:820 protocolIdentifier = { 00:01:15:950 { 00:01:16:040 0 0 8 2250 0 4 } 00:01:16:140 } 00:01:16:200 h245Address = { 00:01:16:310 ipAddress = { 00:01:16:440 ip = { 00:01:16:600 'c0a80273'H 00:01:16:820 } 00:01:16:920 port = { 00:01:17:110 16004 00:01:17:180 } 00:01:17:220 } 00:01:17:250 } 00:01:17:280 destinationInfo = { 00:01:17:310 vendor = { 00:01:17:350 vendor = { 00:01:17:390 t35CountryCode = { 00:01:17:700 11 00:01:17:930 } 00:01:18:080 t35Extension = { 00:01:18:260 11 00:01:18:490 } 00:01:18:630 manufacturerCode = { 00:01:18:800 11 00:01:19:060 } 00:01:19:170 } 00:01:19:320 productId = { 00:01:19:420 '4d756c7469566f4950'H 00:01:19:660 } 00:01:19:770 versionId = { 00:01:19:910 '483332332d5634'H 00:01:19:960 } 00:01:20:000 } 00:01:20:040 terminal = { 00:01:20:080 } 00:01:20:110 mc = { 00:01:20:150 FALSE 00:01:20:190 } 00:01:20:230 undefinedNode = { 00:01:20:260 FALSE 00:01:20:310 } 00:01:20:340 } 00:01:20:370 conferenceID = { 00:01:20:400 '0102030405060708090a0b0c0d0e0f10'H 00:01:20:440 } 00:01:20:470 callIdentifier = { 00:01:20:510 guid = { 00:01:20:540 '6f6f68333233632d469d1f0000000000'H 00:01:20:590 } 00:01:20:630 } 00:01:20:660 multipleCalls = { 00:01:20:690 FALSE 00:01:20:720 } 00:01:20:750 maintainConnection = { 00:01:20:780 TRUE 00:01:20:820 } 00:01:20:850 presentationIndicator = { 00:01:20:880 presentationAllowed = { 00:01:21:070 NULL 00:01:21:230 } 00:01:21:300 } 00:01:21:330 screeningIndicator = { 00:01:21:360 2 00:01:21:390 } 00:01:21:490 } 00:01:21:570 } 00:01:21:620 h245Tunneling = { 00:01:21:670 FALSE 00:01:21:760 } 00:01:21:770 } 00:01:21:810 user_data = { 00:01:21:870 protocol_discriminator = { 00:01:21:940 5 00:01:22:030 } 00:01:22:090 user_information = { 00:01:22:150 '44494749564f495000'H 00:01:22:250 } 00:01:22:290 } 00:01:22:330 UUIE decode successful 00:01:22:360 Decoded Q931 message (outgoing, ooh323c_o_1) 00:01:22:370 } 00:01:22:370 H.225 Connect message received (outgoing, ooh323c_o_1) 00:01:22:370 Deleted CallESTB timer. (outgoing, ooh323c_o_1) 00:01:22:410 Tunneling is disabled for call as H245 address is provided in connect message (outgoing, ooh323c_o_1) 00:01:22:460 Creating H245 Connection 00:01:22:470 Local H.245 port is 12032 (outgoing, ooh323c_o_1) 00:01:22:470 Trying to connect to remote endpoint to setup H245 connection 192.168.2.115:16004(outgoing, ooh323c_o_1) 00:01:22:510 H245 connection creation succesful (outgoing, ooh323c_o_1) 00:01:22:510 Sending receive capability OO_G711ALAW64K in TCS.(outgoing, ooh323c_o_1) 00:01:22:550 Built terminal capability set message (outgoing, ooh323c_o_1) 00:01:22:590 Sending H.245 Message = { 00:01:22:590 request = { 00:01:22:600 terminalCapabilitySet = { 00:01:22:670 sequenceNumber = { 00:01:22:760 1 00:01:22:850 } 00:01:22:930 protocolIdentifier = { 00:01:22:990 { 00:01:23:090 0 0 8 245 0 8 } 00:01:23:130 } 00:01:23:230 capabilityTable = { 00:01:23:260 elem[0] = { 00:01:23:290 capabilityTableEntryNumber = { 00:01:23:330 1 00:01:23:370 } 00:01:23:400 capability = { 00:01:23:540 receiveAudioCapability = { 00:01:23:590 g711Alaw64k = { 00:01:23:640 240 00:01:23:690 } 00:01:23:740 } 00:01:23:780 } 00:01:23:820 } 00:01:23:840 elem[1] = { 00:01:23:880 capabilityTableEntryNumber = { 00:01:24:070 2 00:01:24:230 } 00:01:24:290 capability = { 00:01:24:430 receiveRTPAudioTelephonyEventCapability = { 00:01:24:470 dynamicRTPPayloadType = { 00:01:24:520 101 00:01:24:570 } 00:01:24:620 audioTelephoneEvent = { 00:01:24:670 "0-16" 00:01:24:730 } 00:01:24:780 } 00:01:24:820 } 00:01:24:850 } 00:01:24:880 elem[2] = { 00:01:24:910 capabilityTableEntryNumber = { 00:01:25:090 3 00:01:25:250 } 00:01:25:350 capability = { 00:01:25:450 receiveUserInputCapability = { 00:01:25:620 basicString = { 00:01:25:680 NULL 00:01:25:740 } 00:01:25:780 } 00:01:25:830 } 00:01:25:860 } 00:01:25:890 elem[3] = { 00:01:25:920 capabilityTableEntryNumber = { 00:01:25:960 4 00:01:26:170 } 00:01:26:290 capability = { 00:01:26:420 receiveUserInputCapability = { 00:01:26:560 dtmf = { 00:01:26:610 NULL 00:01:26:670 } 00:01:26:710 } 00:01:26:750 } 00:01:26:790 } 00:01:26:820 } 00:01:26:840 capabilityDescriptors = { 00:01:26:870 elem[0] = { 00:01:26:900 capabilityDescriptorNumber = { 00:01:26:940 1 00:01:26:980 } 00:01:27:010 simultaneousCapabilities = { 00:01:27:150 elem[0] = { 00:01:27:200 elem[0] = { 00:01:27:250 1 00:01:27:310 } 00:01:27:350 } 00:01:27:400 elem[1] = { 00:01:27:440 elem[0] = { 00:01:27:670 2 00:01:27:920 } 00:01:28:070 } 00:01:28:190 elem[2] = { 00:01:28:330 elem[0] = { 00:01:28:470 3 00:01:28:530 } 00:01:28:580 } 00:01:28:620 elem[3] = { 00:01:28:660 elem[0] = { 00:01:28:720 4 00:01:28:770 } 00:01:28:820 } 00:01:28:860 } 00:01:28:890 } 00:01:28:920 } 00:01:28:950 } 00:01:28:960 } 00:01:28:970 } 00:01:28:970 Queued H245 messages 1. (outgoing, ooh323c_o_1) 00:01:28:980 msgCtxt Reset? Done (outgoing, ooh323c_o_1) 00:01:28:990 Built MasterSlave Determination (outgoing, ooh323c_o_1) 00:01:29:090 Sending H.245 Message = { 00:01:29:090 request = { 00:01:29:130 masterSlaveDetermination = { 00:01:29:210 terminalType = { 00:01:29:270 50 00:01:29:370 } 00:01:29:470 statusDeterminationNumber = { 00:01:29:530 10703105 00:01:29:620 } 00:01:29:650 } 00:01:29:660 } 00:01:29:670 } 00:01:29:670 Queued H245 messages 2. (outgoing, ooh323c_o_1) 00:01:29:680 msgCtxt Reset? Done (outgoing, ooh323c_o_1) 00:01:29:730 Receiving H245 message 00:01:29:730 Complete H245 message received (outgoing, ooh323c_o_1) 00:01:29:760 Received H.245 Message = { 00:01:29:760 request = { 00:01:29:770 terminalCapabilitySet = { 00:01:29:830 sequenceNumber = { 00:01:29:950 1 00:01:30:060 } 00:01:30:140 protocolIdentifier = { 00:01:30:220 { 00:01:30:330 0 0 8 245 0 7 } 00:01:30:370 } 00:01:30:490 capabilityTable = { 00:01:30:540 elem[0] = { 00:01:30:650 capabilityTableEntryNumber = { 00:01:30:780 1 00:01:30:820 } 00:01:30:850 capability = { 00:01:30:890 receiveAndTransmitAudioCapability = { 00:01:30:940 g711Alaw64k = { 00:01:30:990 80 00:01:31:040 } 00:01:31:250 } 00:01:31:440 } 00:01:31:540 } 00:01:31:650 elem[1] = { 00:01:31:770 capabilityTableEntryNumber = { 00:01:31:870 2 00:01:32:070 } 00:01:32:170 capability = { 00:01:32:310 receiveAndTransmitUserInputCapability = { 00:01:32:500 nonStandard = { 00:01:32:670 elem[0] = { 00:01:32:800 nonStandardIdentifier = { 00:01:32:860 h221NonStandard = { 00:01:32:930 t35CountryCode = { 00:01:33:010 91 00:01:33:090 } 00:01:33:390 t35Extension = { 00:01:33:570 80 00:01:33:650 } 00:01:33:720 manufacturerCode = { 00:01:33:800 1234 00:01:33:880 } 00:01:33:950 } 00:01:34:020 } 00:01:34:080 data = { 00:01:34:250 '5254505061636b6574697a6174696f6e'H 00:01:34:550 } 00:01:34:810 } 00:01:34:970 } 00:01:35:110 } 00:01:35:150 } 00:01:35:250 } 00:01:35:350 } 00:01:35:430 capabilityDescriptors = { 00:01:35:530 elem[0] = { 00:01:35:670 capabilityDescriptorNumber = { 00:01:35:760 1 00:01:35:910 } 00:01:36:050 simultaneousCapabilities = { 00:01:36:150 elem[0] = { 00:01:36:250 elem[0] = { 00:01:36:300 1 00:01:36:350 } 00:01:36:400 elem[1] = { 00:01:36:450 2 00:01:36:510 } 00:01:36:560 } 00:01:36:600 } 00:01:36:630 } 00:01:36:660 } 00:01:36:680 } 00:01:36:700 } 00:01:36:710 } 00:01:36:710 Handling H245 message. (outgoing, ooh323c_o_1) 00:01:36:720 Processing CapabilityTable Entry 0 (outgoing, ooh323c_o_1) 00:01:36:720 checking whether we need to add cap to joint capabilities(outgoing, ooh323c_o_1) 00:01:36:720 Not adding to joint capabilities. (outgoing, ooh323c_o_1) 00:01:36:730 Processing CapabilityTable Entry 1 (outgoing, ooh323c_o_1) 00:01:36:730 Unsupported cap type encountered. Ignoring. (outgoing, ooh323c_o_1) 00:01:36:740 checking whether we need to add cap to joint capabilities(outgoing, ooh323c_o_1) 00:01:36:740 Unsupported cap type encountered. Ignoring. (outgoing, ooh323c_o_1) 00:01:36:750 Not adding to joint capabilities. (outgoing, ooh323c_o_1) 00:01:36:750 Built TerminalCapabilitySet Ack (outgoing, ooh323c_o_1) 00:01:36:850 Sending H.245 Message = { 00:01:36:850 response = { 00:01:36:910 terminalCapabilitySetAck = { 00:01:36:990 sequenceNumber = { 00:01:37:050 1 00:01:37:160 } 00:01:37:230 } 00:01:37:310 } 00:01:37:310 } 00:01:37:350 Queued H245 messages 3. (outgoing, ooh323c_o_1) 00:01:37:350 msgCtxt Reset? Done (outgoing, ooh323c_o_1) 00:01:37:410 Finished handling H245 message. (outgoing, ooh323c_o_1) 00:01:37:410 Sending H245 message (outgoing, ooh323c_o_1) 00:01:37:440 Sending OOTerminalCapabilitySetAck H245 message over H.245 channel. (outgoing, ooh323c_o_1) 00:01:37:450 H245 Message sent successfully (outgoing, ooh323c_o_1) 00:01:37:450 Sent Message - TerminalCapabilitySet (outgoing, ooh323c_o_1) 00:01:37:500 Receiving H245 message 00:01:37:500 Complete H245 message received (outgoing, ooh323c_o_1) 00:01:37:510 Received H.245 Message = { 00:01:37:510 request = { 00:01:37:580 masterSlaveDetermination = { 00:01:37:680 terminalType = { 00:01:37:730 60 00:01:37:830 } 00:01:37:910 statusDeterminationNumber = { 00:01:38:020 3742460 00:01:38:130 } 00:01:38:220 } 00:01:38:230 } 00:01:38:270 } 00:01:38:320 Handling H245 message. (outgoing, ooh323c_o_1) 00:01:38:320 Master Slave Determination received (outgoing, ooh323c_o_1) 00:01:38:320 Built MasterSlave determination Ack (outgoing, ooh323c_o_1) 00:01:38:360 Sending H.245 Message = { 00:01:38:360 response = { 00:01:38:370 masterSlaveDeterminationAck = { 00:01:38:390 decision = { 00:01:38:410 master = { 00:01:38:440 NULL 00:01:38:480 } 00:01:38:510 } 00:01:38:530 } 00:01:38:550 } 00:01:38:560 } 00:01:38:560 Queued H245 messages 3. (outgoing, ooh323c_o_1) 00:01:38:560 msgCtxt Reset? Done (outgoing, ooh323c_o_1) 00:01:38:570 MasterSlaveDetermination done - Slave(outgoing, ooh323c_o_1) 00:01:38:570 Finished handling H245 message. (outgoing, ooh323c_o_1) 00:01:38:580 Sending H245 message (outgoing, ooh323c_o_1) 00:01:38:580 Sending OOMasterSlaveAck H245 message over H.245 channel. (outgoing, ooh323c_o_1) 00:01:38:590 H245 Message sent successfully (outgoing, ooh323c_o_1) 00:01:38:590 Sent Message - MasterSlaveDetermination (outgoing, ooh323c_o_1) 00:01:38:670 Receiving H245 message 00:01:38:670 Complete H245 message received (outgoing, ooh323c_o_1) 00:01:38:670 Received H.245 Message = { 00:01:38:720 response = { 00:01:38:730 terminalCapabilitySetAck = { 00:01:38:770 sequenceNumber = { 00:01:38:890 1 00:01:38:970 } 00:01:39:030 } 00:01:39:110 } 00:01:39:140 } 00:01:39:140 Handling H245 message. (outgoing, ooh323c_o_1) 00:01:39:190 Deleted TCS Timer. (outgoing, ooh323c_o_1) 00:01:39:190 Opening logical channels (outgoing, ooh323c_o_1) 00:01:39:190 Looking for matching capabilities. (outgoing, ooh323c_o_1) 00:01:39:200 ERROR:Incompatible audio capabilities - Can not open audio channel (outgoing, ooh323c_o_1) 00:01:39:200 ERROR:Failed to open audio channels. Clearing call.(outgoing, ooh323c_o_1) 00:01:39:210 Finished handling H245 message. (outgoing, ooh323c_o_1) 00:01:39:210 Sending H245 message (outgoing, ooh323c_o_1) 00:01:39:240 Sending OOTerminalCapabilitySetReject H245 message over H.245 channel. (outgoing, ooh323c_o_1) 00:01:39:250 H245 Message sent successfully (outgoing, ooh323c_o_1) 00:01:39:280 Sent Message - TerminalCapabilitySetAck (outgoing, ooh323c_o_1) 00:01:39:290 In ooEndCall call state is - OO_CALL_CLEAR (outgoing, ooh323c_o_1) 00:01:39:290 Built EndSession Command (outgoing, ooh323c_o_1) 00:01:39:330 Sending H.245 Message = { 00:01:39:330 command = { 00:01:39:340 endSessionCommand = { 00:01:39:390 disconnect = { 00:01:39:480 NULL 00:01:39:560 } 00:01:39:650 } 00:01:39:670 } 00:01:39:720 } 00:01:39:740 Sending H245 message (outgoing, ooh323c_o_1) 00:01:39:740 Sending ? H245 message over H.245 channel. (outgoing, ooh323c_o_1) 00:01:39:750 H245 Message sent successfully (outgoing, ooh323c_o_1) 00:01:39:750 Sent Message - EndSessionCommand (outgoing, ooh323c_o_1) 00:01:39:790 msgCtxt Reset? Done (outgoing, ooh323c_o_1) 00:01:39:790 Building Release Complete message to send(outgoing, ooh323c_o_1) 00:01:39:830 Built Release Complete message (outgoing, ooh323c_o_1) 00:01:39:830 UserInfo encoding - successful 00:01:39:870 Q931 Message = { 00:01:39:870 protocolDiscriminator = 8 00:01:39:880 callReference = 78 00:01:39:880 from = originator 00:01:39:880 messageType = 5a 00:01:39:890 Cause IE = { 00:01:39:890 Q931NormalCallClearing 00:01:39:890 } 00:01:39:900 Display IE = { 00:01:39:920 VOIP-8 00:01:39:930 } 00:01:39:930 h323_uu_pdu = { 00:01:39:970 h323_message_body = { 00:01:40:070 releaseComplete = { 00:01:40:090 protocolIdentifier = { 00:01:40:210 { 00:01:40:330 0 0 8 2250 0 4 } 00:01:40:440 } 00:01:40:530 reason = { 00:01:40:660 undefinedReason = { 00:01:40:770 NULL 00:01:40:890 } 00:01:40:990 } 00:01:41:030 callIdentifier = { 00:01:41:060 guid = { 00:01:41:090 '6f6f68333233632d469d1f0000000000'H 00:01:41:140 } 00:01:41:270 } 00:01:41:360 } 00:01:41:410 } 00:01:41:490 h245Tunneling = { 00:01:41:590 FALSE 00:01:41:620 } 00:01:41:630 } 00:01:41:640 UUIE decode successful 00:01:41:650 } 00:01:41:730 Receiving H245 message 00:01:41:730 Complete H245 message received (outgoing, ooh323c_o_1) 00:01:41:730 Received H.245 Message = { 00:01:41:770 response = { 00:01:41:850 masterSlaveDeterminationAck = { 00:01:41:870 decision = { 00:01:41:950 slave = { 00:01:42:050 NULL 00:01:42:150 } 00:01:42:270 } 00:01:42:350 } 00:01:42:370 } 00:01:42:410 } 00:01:42:410 Handling H245 message. (outgoing, ooh323c_o_1) 00:01:42:410 Deleted MSD Timer. (outgoing, ooh323c_o_1) 00:01:42:450 Opening logical channels (outgoing, ooh323c_o_1) 00:01:42:450 Looking for matching capabilities. (outgoing, ooh323c_o_1) 00:01:42:490 ERROR:Incompatible audio capabilities - Can not open audio channel (outgoing, ooh323c_o_1) 00:01:42:490 ERROR:Failed to open audio channels. Clearing call.(outgoing, ooh323c_o_1) 00:01:42:500 Finished handling H245 message. (outgoing, ooh323c_o_1) 00:01:42:500 Sending H225 message (outgoing, ooh323c_o_1) 00:01:42:510 Sending Q931 message (outgoing, ooh323c_o_1) 00:01:42:510 H2250/Q931 Message sent successfully (outgoing, ooh323c_o_1) 00:01:42:510 Sent Message - ReleaseComplete (outgoing, ooh323c_o_1) 00:01:42:540 In ooEndCall call state is - OO_CALL_CLEAR_RELEASESENT (outgoing, ooh323c_o_1) 00:01:42:550 Warn:RemoteEndpoint closed connection (outgoing, ooh323c_o_1) 00:01:42:550 Receiving H245 message 00:01:42:590 Complete H245 message received (outgoing, ooh323c_o_1) 00:01:42:590 Received H.245 Message = { 00:01:42:640 command = { 00:01:42:690 endSessionCommand = { 00:01:42:730 disconnect = { 00:01:42:810 NULL 00:01:42:990 } 00:01:43:070 } 00:01:43:130 } 00:01:43:160 } 00:01:43:160 Handling H245 message. (outgoing, ooh323c_o_1) 00:01:43:220 Handling H.245 command message. (outgoing, ooh323c_o_1) 00:01:43:220 Received EndSession command (outgoing, ooh323c_o_1) 00:01:43:220 Deleted Session Timer. (outgoing, ooh323c_o_1) 00:01:43:230 Closing H.245 connection (outgoing, ooh323c_o_1) 00:01:43:230 Closed H245 connection. (outgoing, ooh323c_o_1) 00:01:43:270 Handling H.245 command message done. (outgoing, ooh323c_o_1) 00:01:43:270 Finished handling H245 message. (outgoing, ooh323c_o_1) 00:01:43:280 In ooEndCall call state is - OO_CALL_CLEARED (outgoing, ooh323c_o_1) 00:01:43:280 Cleaning Call (outgoing, ooh323c_o_1)- reason:OO_REASON_LOCAL_CLEARED 00:01:43:290 Removed call (outgoing, ooh323c_o_1) from list //End of simple.log I am not very much sure with H245 signaling so if any one can specify more abt what goes wrong and what to do the solve will be great helpful.. Thanks in advance.. Manish __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click _______________________________________________ ooh323c-devel mailing list ooh323c-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ooh323c-devel ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click _______________________________________________ ooh323c-devel mailing list ooh323c-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ooh323c-devel
