Hi Sean
First of all thanks for prompt reply..
Your are right when you said the problem is
Incompatible audio channel capability..
we are using alaw at both the end but the only
difference is that at our ooH323c-0.8 side we are
having having "receiveAudioCapability" where from
ivatsu phone we are getting
"receiveAndTransmitAudioCapability" in
terminalCapabilitySet Request message..
I would like to know is that, whether there is any
way by which I can set our ooH323c-0.8 with
"receiveAndTransmitAudioCapability"..
Here I am mentioning again only the part of the log
where we have doubt.. for your reference..
You can see from terminalCapabilitySet message
that we are using g711Alaw64k at both the end..
From OOH323c-0.8:
00:01:22:590 Sending H.245 Message = {
00:01:22:590 request = {
00:01:22:600 terminalCapabilitySet = {
00:01:22:670 sequenceNumber = {
00:01:22:760 1
00:01:22:850 }
00:01:22:930 protocolIdentifier = {
00:01:22:990 {
00:01:23:090 0 0 8 245 0 8 }
00:01:23:130 }
00:01:23:230 capabilityTable = {
00:01:23:260 elem[0] = {
00:01:23:290
capabilityTableEntryNumber = {
00:01:23:330 1
00:01:23:370 }
00:01:23:400 capability = {
00:01:23:540 receiveAudioCapability
= {
00:01:23:590 g711Alaw64k = {
00:01:23:640 240
00:01:23:690 }
00:01:23:740 }
00:01:23:780 }
00:01:23:820 }
00:01:23:840 elem[1] = {
00:01:23:880
capabilityTableEntryNumber = {
00:01:24:070 2
00:01:24:230 }
00:01:24:290 capability = {
00:01:24:430
receiveRTPAudioTelephonyEventCapability = {
00:01:24:470
dynamicRTPPayloadType = {
00:01:24:520 101
00:01:24:570 }
00:01:24:620 audioTelephoneEvent
= {
00:01:24:670 "0-16"
00:01:24:730 }
00:01:24:780 }
00:01:24:820 }
00:01:24:850 }
00:01:24:880 elem[2] = {
00:01:24:910
capabilityTableEntryNumber = {
00:01:25:090 3
00:01:25:250 }
00:01:25:350 capability = {
00:01:25:450
receiveUserInputCapability = {
00:01:25:620 basicString = {
00:01:25:680 NULL
00:01:25:740 }
00:01:25:780 }
00:01:25:830 }
00:01:25:860 }
00:01:25:890 elem[3] = {
00:01:25:920
capabilityTableEntryNumber = {
00:01:25:960 4
00:01:26:170 }
00:01:26:290 capability = {
00:01:26:420
receiveUserInputCapability = {
00:01:26:560 dtmf = {
00:01:26:610 NULL
00:01:26:670 }
00:01:26:710 }
00:01:26:750 }
00:01:26:790 }
00:01:26:820 }
00:01:26:840 capabilityDescriptors = {
00:01:26:870 elem[0] = {
00:01:26:900
capabilityDescriptorNumber = {
00:01:26:940 1
00:01:26:980 }
00:01:27:010 simultaneousCapabilities
= {
00:01:27:150 elem[0] = {
00:01:27:200 elem[0] = {
00:01:27:250 1
00:01:27:310 }
00:01:27:350 }
00:01:27:400 elem[1] = {
00:01:27:440 elem[0] = {
00:01:27:670 2
00:01:27:920 }
00:01:28:070 }
00:01:28:190 elem[2] = {
00:01:28:330 elem[0] = {
00:01:28:470 3
00:01:28:530 }
00:01:28:580 }
00:01:28:620 elem[3] = {
00:01:28:660 elem[0] = {
00:01:28:720 4
00:01:28:770 }
00:01:28:820 }
00:01:28:860 }
00:01:28:890 }
00:01:28:920 }
00:01:28:950 }
00:01:28:960 }
00:01:28:970 }
And from Ivatsu phone we get:
00:01:29:760 Received H.245 Message = {
00:01:29:760 request = {
00:01:29:770 terminalCapabilitySet = {
00:01:29:830 sequenceNumber = {
00:01:29:950 1
00:01:30:060 }
00:01:30:140 protocolIdentifier = {
00:01:30:220 {
00:01:30:330 0 0 8 245 0 7 }
00:01:30:370 }
00:01:30:490 capabilityTable = {
00:01:30:540 elem[0] = {
00:01:30:650
capabilityTableEntryNumber = {
00:01:30:780 1
00:01:30:820 }
00:01:30:850 capability = {
00:01:30:890
receiveAndTransmitAudioCapability = {
00:01:30:940 g711Alaw64k = {
00:01:30:990 80
00:01:31:040 }
00:01:31:250 }
00:01:31:440 }
00:01:31:540 }
00:01:31:650 elem[1] = {
00:01:31:770
capabilityTableEntryNumber = {
00:01:31:870 2
00:01:32:070 }
00:01:32:170 capability = {
00:01:32:310
receiveAndTransmitUserInputCapability = {
00:01:32:500 nonStandard = {
00:01:32:670 elem[0] = {
00:01:32:800
nonStandardIdentifier = {
00:01:32:860
h221NonStandard = {
00:01:32:930
t35CountryCode = {
00:01:33:010 91
00:01:33:090 }
00:01:33:390
t35Extension = {
00:01:33:570 80
00:01:33:650 }
00:01:33:720
manufacturerCode = {
00:01:33:800 1234
00:01:33:880 }
00:01:33:950 }
00:01:34:020 }
00:01:34:080 data = {
00:01:34:250
'5254505061636b6574697a6174696f6e'H
00:01:34:550 }
00:01:34:810 }
00:01:34:970 }
00:01:35:110 }
00:01:35:150 }
00:01:35:250 }
00:01:35:350 }
00:01:35:430 capabilityDescriptors = {
00:01:35:530 elem[0] = {
00:01:35:670
capabilityDescriptorNumber = {
00:01:35:760 1
00:01:35:910 }
00:01:36:050 simultaneousCapabilities
= {
00:01:36:150 elem[0] = {
00:01:36:250 elem[0] = {
00:01:36:300 1
00:01:36:350 }
00:01:36:400 elem[1] = {
00:01:36:450 2
00:01:36:510 }
00:01:36:560 }
00:01:36:600 }
00:01:36:630 }
00:01:36:660 }
00:01:36:680 }
00:01:36:700 }
00:01:36:710 }
Hope this helps you figure out where is the
problem..
Thanks again..
Manish..
--- Sean Lowry <[EMAIL PROTECTED]> wrote:
> From the log it looks like its Incompatible auto!.
>
> Make sure you set both endpoints to be the same say
> allow only one format
> then try and see if you get the same results
>
> -----Original Message-----
> From: manish varma [mailto:[EMAIL PROTECTED]
>
> Sent: 30 November 2005 16:33
> To: ooh323c-devel@lists.sourceforge.net
> Subject: [ooh323c-devel] (no subject)
>
> Hi all,
>
> We are trying to make ooh323c-0.8 on Atmel
> AT75C221
> work with VOIP unit from ivatsu and not been able to
> establish call.. we verified H225 signaling seems to
> be ok but problem is during H245 messages..
>
> When we checked the log we found these messages:
>
> 00:01:42:450 Looking for matching capabilities.
> (outgoing, ooh323c_o_1)
> 00:01:42:490 ERROR:Incompatible audio capabilities
> -
> Can not open audio channel (outgoing, ooh323c_o_1)
> 00:01:42:490 ERROR:Failed to open audio channels.
> Clearing call.(outgoing, ooh323c_o_1)
> 00:01:42:500 Finished handling H245 message.
> (outgoing, ooh323c_o_1)
>
> Though we are able to make call with sjphone, we
> are some how not been able to call and call ends as
> we
> are not able to open the channels..
>
> I am here below attaching the entire log file if
> any one finds it necessary to go thru:
>
>
>
>
>
> 00:00:33:830 Signalling IP address is set to
> 192.168.2.26
> 00:00:33:830 Listen port number is set to 1720
> 00:00:33:840 Creating CMD listener at
> 192.168.2.26:7575
> 00:00:33:850 CMD listener creation - successful
> 00:00:33:850 Added alias: H323ID - intrigue
> 00:00:33:850 Added alias: DialedDigits - 200
> 00:00:33:860 Dtmf mode set to H.245(alphanumeric)
> for
> endpoint
> 00:00:33:860 Dtmf mode set to H.245(signal) for
> endpoint
> 00:00:33:860 Enabled RFC2833 DTMF capability for
> end-point
> 00:00:33:860 Adding endpoint capability
> OO_G711ALAW64K.
> 00:00:35:050 H323 listener creation - successful
> 00:00:35:140 H.323 Endpoint Configuration is as
> follows:
> 00:00:35:140 \0x09Trace File: /var/simple.log
> 00:00:35:150 \0x09FastStart - disabled
> 00:00:35:150 \0x09H245 Tunneling - enabled
> 00:00:35:150 \0x09AutoAnswer - disabled
> 00:00:35:160 \0x09Terminal Type - 50
> 00:00:35:160 \0x09T35 CountryCode - 1
> 00:00:35:160 \0x09T35 Extension - 0
> 00:00:35:170 \0x09Manufacturer Code - 71
> 00:00:35:170 \0x09ProductID - objsys
> 00:00:35:170 \0x09VersionID - v0.8
> 00:00:35:180 \0x09Local signalling IP address -
> 192.168.2.26
> 00:00:35:180 \0x09H225 ListenPort - 1720
> 00:00:35:180 \0x09CallerID - VOIP-8
> 00:00:35:230 \0x09Call Establishment Timeout - 60
> seconds
> 00:00:35:230 \0x09MasterSlaveDetermination Timeout
> -
> 30 seconds
> 00:00:35:240 \0x09TerminalCapabilityExchange
> Timeout
> - 30 seconds
> 00:00:35:240 \0x09LogicalChannel Timeout - 30
> seconds
> 00:00:35:240 \0x09Session Timeout - 15 seconds
> 00:00:52:000 Cmd connection accepted
> 00:00:53:010 Processing MakeCall command
> ooh323c_o_1
> 00:00:53:010 Created a new call (outgoing,
> ooh323c_o_1)
> 00:00:53:020 Configured mediainfo for cap
> OO_G711ALAW64K (outgoing, ooh323c_o_1)
> 00:00:53:020 Configured mediainfo for cap
> OO_G711ALAW64K (outgoing, ooh323c_o_1)
> 00:00:53:020 Parsing destination [EMAIL PROTECTED]
> 00:00:53:030 Destination is parsed as dialed digits
> 202
> 00:00:53:040 Generated callRef 78
> 00:00:53:040 Trying to connect to remote
> endpoint(192.168.2.115:1720) to setup H2250 channel
> (outgoing, ooh323c_o_1)
> 00:00:53:050 H2250 transmiter channel creation -
> succesful (outgoing, ooh323c_o_1)
> 00:00:53:090 Built SETUP message (outgoing,
> ooh323c_o_1)
> 00:00:53:130 UserInfo encoding - successful
> 00:00:53:170 Q931 Message = {
> 00:00:53:170 protocolDiscriminator = 8
> 00:00:53:180 callReference = 78
> 00:00:53:180 from = originator
> 00:00:53:180 messageType = 5
> 00:00:53:180 Bearer-Capability IE = {
> 00:00:53:230 88, 90, a5 }
> 00:00:53:270 Display IE = {
> 00:00:53:270 VOIP-8
> 00:00:53:270 }
> 00:00:53:310 CallingPartyNumber IE = {
> 00:00:53:310 200
> 00:00:53:310 }
> 00:00:53:310 CalledPartyNumber IE = {
> 00:00:53:350 202
> 00:00:53:350 }
> 00:00:53:360 h323_uu_pdu = {
> 00:00:53:370 h323_message_body = {
> 00:00:53:410 setup = {
> 00:00:53:510 protocolIdentifier = {
> 00:00:53:610 {
> 00:00:53:650 0 0 8 2250 0 4 }
> 00:00:53:790 }
> 00:00:53:870 sourceAddress = {
> 00:00:53:940 elem[0] = {
> 00:00:53:980 dialedDigits = {
> 00:00:54:020 "200"
> 00:00:54:070 }
> 00:00:54:110 }
> 00:00:54:150 elem[1] = {
> 00:00:54:190 h323_ID = {
> 00:00:54:230 intrigue
> 00:00:54:300 }
> 00:00:54:340 }
> 00:00:54:370 }
> 00:00:54:400 sourceInfo = {
> 00:00:54:430 vendor = {
> 00:00:54:470 vendor = {
> 00:00:54:510 t35CountryCode =
> {
> 00:00:54:570 1
> 00:00:54:620 }
> 00:00:54:850 t35Extension = {
> 00:00:55:020 0
> 00:00:55:130 }
> 00:00:55:270 manufacturerCode
> =
> {
> 00:00:55:450 71
> 00:00:55:640 }
> 00:00:55:800 }
> 00:00:55:870 productId = {
> 00:00:56:010 '6f626a737973'H
> 00:00:56:120 }
> 00:00:56:320 versionId = {
> 00:00:56:490 '76302e38'H
> 00:00:56:580 }
> 00:00:56:620 }
> 00:00:56:650 terminal = {
> 00:00:56:690 }
> 00:00:56:870 mc = {
> 00:00:57:050 FALSE
> 00:00:57:150 }
> 00:00:57:220 undefinedNode = {
> 00:00:57:260 FALSE
> 00:00:57:370 }
> 00:00:57:460 }
> 00:00:57:490 destinationAddress = {
> 00:00:57:520 elem[0] = {
> 00:00:57:560 dialedDigits = {
> 00:00:57:610 "202"
> 00:00:57:650 }
> 00:00:57:690 }
> 00:00:57:860 }
> 00:00:57:990 destCallSignalAddress = {
> 00:00:58:080 ipAddress = {
> 00:00:58:220 ip = {
> 00:00:58:390 'c0a80273'H
> 00:00:58:610 }
> 00:00:58:730 port = {
> 00:00:58:910 1720
> 00:00:59:050 }
> 00:00:59:150 }
> 00:00:59:250 }
> 00:00:59:350 activeMC = {
> 00:00:59:460 FALSE
> 00:00:59:500 }
> 00:00:59:530 conferenceID = {
> 00:00:59:560
> '0102030405060708090a0b0c0d0e0f10'H
>
=== message truncated ===
__________________________________
Yahoo! Music Unlimited
Access over 1 million songs. Try it free.
http://music.yahoo.com/unlimited/
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
ooh323c-devel mailing list
ooh323c-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ooh323c-devel
