Dear P.O.:
today I was able to overhaul the address-with samples a little bit to make sure
that they execute
under Windows and MacOSX (previously they would run on Windows only).
Also, I added a few more samples and some comments and more output information
to explain what the
different nutshell examples excercise/demonstrate. (If time permits, I will add
a few more examples
tomorrow.)
HTH,
---rony
P.S.: This is talking about the samples in the subdirectory
"examples.addressWith" from my Dropbox
which contains Windows and MacOSX versions of ooRexx 5.0 beta with "address
with" and "variable
references" (cf.
<https://www.dropbox.com/sh/ho1hcnnocv7xfb3/AAAEZoJEW4fY7xvXJem1GSsUa?dl=0>).
On 28.07.2018 23:43, P.O. Jonsson wrote:
> Dear Rony,
>
> I am in Sweden on holidays so I have little time to do things, as soon as I
> have some time I will
> come back on testing these things on Mac and on the Installer.
>
> Von meinen Macbook gesendet
>
> Hälsningar/Regards/Grüsse,
> P.O. Jonsson
> oor...@jonases.se <mailto:oor...@jonases.se>
>
>
>
>> Am 28.07.2018 um 17:22 schrieb Rony <rony.flatsc...@wu.ac.at
>> <mailto:rony.flatsc...@wu.ac.at>>:
>>
>> Dear P.O.,
>>
>> being on a visit weekend trip I have not been able to come up with samples
>> of address...with that
>> work under Linux so far. However documentation and samples may be studied eg
>> at
>> <http://www.rexxinfo.org/html/instructions.html> or in the docs of the
>> Regina interpreter from
>> Sourceforge
>> <https://sourceforge.net/projects/regina-rexx/files/regina-documentation/3.9.1/regina.pdf/download>.
>>
>> ooRexx adds additional features, namely support for orderable collections,
>> streams and monitors.
>> You may get at samples studying the ooRexx ADDRESS testunit.
>>
>> HTH
>>
>> —-rony
>>
>> Rony G. Flatscher (mobil/e)
>>
>> Am 27.07.2018 um 20:15 schrieb Rony <rony.flatsc...@wu.ac.at
>> <mailto:rony.flatsc...@wu.ac.at>>:
>>
>>> Dear P.O.,
>>>
>>> congratulations and thanks for reporting!
>>>
>>> Ad my examples: they were written for Windows, therefore using cmd as the
>>> einvironment and using
>>> the command ‚dir‘.
>>>
>>> Please change ‚cmd‘ to two quotes and the command to ‚ls -al‘, then the
>>> examples should run
>>> under Unix.
>>>
>>> Best regards
>>>
>>> —-rony
>>>
>>> Rony G. Flatscher (mobil/e)
>>>
>>> Am 27.07.2018 um 18:16 schrieb P.O. Jonsson <oor...@jonases.se
>>> <mailto:oor...@jonases.se>>:
>>>
>>>> My first reply bounced so here is another try:
>>>>
>>>> Dear Rony,
>>>>
>>>> This is just to inform that I have successfully created a fresh build for
>>>> version 11467 of
>>>> ooRexx for Mac and successfully tested it with some of my own programs and
>>>> rexxcps. Runs as
>>>> expected. In the coming days I will see if I can make a new pkg installer.
>>>>
>>>> That was the good news. The bad news is that I think it is not working as
>>>> it should with the
>>>> newest features. I downloaded your examples and run them blindly and some
>>>> seems to work and
>>>> others not. I will install the BSF/ooRexxx installer and compare the
>>>> output later.
>>>>
>>>> I am still using a tweaked version of cmakelists.txt so there might be
>>>> something there, I will
>>>> investigate and come back.
>>>>
>>>> Attached the results of my runs
>>>>
>>>> <AddressWith.txt>
>>>> <variablereference.txt>
>>>>
>>>>
>>>> Von meinen Macbook gesendet
>>>>
>>>> Hälsningar/Regards/Grüsse,
>>>> P.O. Jonsson
>>>> oor...@jonases.se <mailto:oor...@jonases.se>
>>>>
>>>>
>>>>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Oorexx-devel mailing list
Oorexx-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/oorexx-devel
