> >>>    There are applications where you would want the card some distance
> >>>    from the computer.
> >>>
> >>>    a) If it had a IEEE 1394 (firewire) interface, you could hook up
> >>>       several cards without running out of slots.
> >>>
> >>>    b) Ethernet would allow much longer distances than firewire,
> >>>
> >>>       Is there a way to provide Ethernet without having to add a CPU,
> >>>       memory, ROM, etc. ?
> >>
> >> I would prefer USB2 (it's everywhere, and I really do not have a 
> >> IEE1394 port) or using GbE (gigabit ethernet), the 100mbit is too slow 
> >> for a good video, even non-hd, in yuv.

I suggested firewire rather than USB as everything I've read says that
firewire is better than USB for high speed.  And better with longer cables.
And there is a 800 Mbps version of firewire, while USB tops out at 480.

It should be possible to provide both.  Those external boxes for hanging a
PATA disk on USB/FW are only about US$10 extra (retail) to have both interfaces
(USB2 plus FW-400) rather than just one.  So the chips obviously don't cost 
much.

For machines that don't have firewire or USB2 (some machines are USB1 only),
there are cards that provide both.  (and other combos including Ethernet, SATA
ports, ...)

I didn't bother to specify gigabit Ethernet, I assumed any new design would not
use 100 Mbps, as gigabit is inexpensive now.

> What I mean is an external graphic card/accelerator (without add-on 
> card, so here goes USB2 and Ethernet) and native display connection 
> (LVDS). The smpte will not handle X11 nor OpenGL protocol.
> 
> I solved the thing for now by using a laptop motherboard, but that 
> requires more power, a hard drive and maintaining an operating system. 
> But playing mpeg2 (role of television) or using it as another X screen 
> (for work) does not really need a whole PC, a simple board with 
> eth/USB-FPGA-LVDS will do it (of course with proper drivers)

Yes, an Ethernet-to-video bridge would be very useful in many applications.
_______________________________________________
Open-graphics mailing list
[email protected]
http://lists.duskglow.com/mailman/listinfo/open-graphics
List service provided by Duskglow Consulting, LLC (www.duskglow.com)

Reply via email to