I was working on a prototype for the rc/setup/config file
for the PCI analyzer upload program, and it occured to me that
we can get remote access "for free". A slight modification
of the rc/setup/config file, and it is a shell script:
#!/bin/sh
# OGD PCI ANALYZER UPLOAD COMMAND FILE
# Version 0.01
export TRIGGER_TYPE=data_pattern_single
# X = don't care
export TRIGGER_0=0010XXXXXXXXXXXXX
# Save 5500 samples before trigger
export CAPTURE_WINDOW_START=-5500
export SAMPLE_TIME=1ns
export CAPTURE_ENABLE=1
# Generate trigger pulse for oscilloscope 143 samples after LA trigger
export SCOPE_TRIGGER_OFFSET=143
export UPLOAD_SAMPLE_RANGE=5000,6000
/usr/local/bin/ogd_pci_analyzer_capture | gzip --best
The display program can generate this file, and then execute it:
/data/ogd_pci_analyzer/test_run_67/upload_script >
/data/ogd_pci_analyzer/test_run_67/part5000.gz
If the support machine isn't the same as the display machine, then run
rsh support_machine sh <
/data/ogd_pci_analyzer/test_run_67/upload_script >
/data/ogd_pci_analyzer/test_run_67/part5000.gz
To upload additional data (demand paging), just set
export CAPTURE_ENABLE=0
export UPLOAD_SAMPLE_RANGE=6000,7000
and run it again, directing the output into the appropriate filename.
_______________________________________________
Open-graphics mailing list
[email protected]
http://lists.duskglow.com/mailman/listinfo/open-graphics
List service provided by Duskglow Consulting, LLC (www.duskglow.com)
