Hi List, I compiled the tools now. I had to compile them on a Debian 6 system, the autotools on my Debian 5 lab machine give lots of errors.
I needed at least the following packages from the repository: sudo apt-get install libatomic-ops-dev verilog libpci3 Then I tried to compile the directories in this order (don't do this, there is a better way): sudo apt-get install libatomic-ops-dev verilog libpci3 wget http://www.hpl.hp.com/personal/Hans_Boehm/gc/gc_source/gc-7.2alpha6.tar.gz wget http://www.eideticdew.org/download/culibs-0.25.tar.bz2 oga1hq # copy the autotools.sh file to the following directories and run as necessary # if you are on debian 5 and get an automake gives an error with LIBTOOL install # wget http://ftp.gnu.org/gnu/libtool/libtool-2.4.tar.gz oga1lib # change line in Makefile to link to oga1hq: OGA1LIB_LIBS = -L/usr/local/lib -loga1 -loga1hq Then I realized it is better to just run martin@hop:~/Downloads/ogp/trunk/tools/build-script$ ./build.sh The results are in /opt/ogp and can be used on Debian 5 (I had to copy the libpci.so.3.1.. from Debian 6 as well) This is the output of oga1-vid-test. Apparently the ForthDD display reports to be 1280x1024. Even though the hardware is WXGA 1280x768. cyberpower:/dev/shm/ogp/bin# ./oga1-vid-test --busid=0b:01.0 oga1_i2c_get_edid: Reading EDID for top head. manufacturer ID = "FDD" product=4868 sn=16777216 (2002 week 16) EDID version 1.3 Display is digital Digital interface: DVI Color Bit Depth is undefined image size 32x24 display gama 1.000000 Power management: Color encoding : RGB 4:4:4:4 & YCrCb 4:4:4 Features: (default GTF supported) Chromaticity Coordinates: Red: 280:15c 0.625000:0.339844 Green: 129:26c 0.290039:0.605469 Blue: 09a:048 0.150391:0.070312 White: 122:130 0.283203:0.296875 Established Timings: Standard Timing: 0: 1280x1024 @ 60 Hz 1: 1280x1024 @ 75 Hz 2: 1280x1024 @ 85 Hz 3: 1024x768 @ 85 Hz Descriptor 0: pixel clock = 108090 KHz H active 1280 H blanking 408 V active 1024 V blanking 42 H sync offset 48 H sync width 112 V sync offset 1 V sync width 3 H image size 320mm V image size 240mm H border 0 V border 0 flags 1e Descriptor 1: (FF) Serial Number ;=?A Descriptor 2: (FE) ASCII string SXGA I/F Descriptor 3: (FE) ASCII string SXGA 00 ff ff ff ff ff ff 00 18 84 04 13 00 00 00 01 0c 10 01 03 81 20 18 00 09 04 88 a0 57 4a 9b 26 WJ & 12 48 4c 00 00 00 81 80 81 8f 81 99 61 59 01 01 HL aY 01 01 01 01 01 01 39 2a 00 98 51 00 2a 40 30 70 9* Q *@0p 13 00 40 f0 10 00 00 1e 00 00 00 ff 00 3b 3d 3f @ ;=? 41 0b 0a 0a 0a 0a 0a 0a 0a 0a 00 00 00 fe 00 53 A S 58 47 41 20 49 2f 46 0a 20 20 20 20 00 00 00 fe XGA I/F 00 53 58 47 41 0a 20 20 20 20 20 20 20 20 00 62 SXGA b oga1_i2c_get_edid: Reading EDID for bottom head. oga1_i2c_get_edid: failed to read byte 0. Looking for mode: ddc Requested clock = 216180000 Actual clock = 214285680 (difference = 1894320) Dividers = sel:1 pre:35 post:1 Setting Up DVI on top head. oga1_dvi_init_single_link: pixel clock = 108090000 Loading Video Program on top head (1280x1024@60). start=0x8000000 pitch=1280 hres=1280, hfp=48, hsync=112, hbp=248 [408] vres=1024, vfp=1, vsync=3, vbp=38 [42] pix-clock=108090000 digital hsync-low vsync-high oga1_set_video_mode: digital 1 dvi_sl 1 vid_mode 5 oga1_set_video_mode: pixel_info = d output_mode = 1 00987654 00123456 -- Martin Kielhorn Randall Division of Cell & Molecular Biophysics King's College London, New Hunt's House Guy's Campus, London SE1 1UL, U.K. tel: +44 (0) 207 848 6519, fax: +44 (0) 207 848 6435
_______________________________________________ Open-graphics mailing list [email protected] http://lists.duskglow.com/mailman/listinfo/open-graphics List service provided by Duskglow Consulting, LLC (www.duskglow.com)
