Hi, I am pretty new to open-iscsi and I ran into a problem that was discussed in this list back in Sep. 2006. But I did not find a solution there. So please cna somebody show me the way out:
I have a iscsi target in my net and open-iscsi installed on one machine (debian etch and open-iscsi version 2.0.730-1etch1) Everything works fine: Discovery, login, ... When I switch off the iscsitarget service on my other machine I get: session0: iscsi: session recovery timed out after 120 secs in the logfiles but the session command shows no problem: # iscsiadm -m session tcp: [0] 192.168.188.110:3260,1 iqn.2008-01.de.multinet.xen10:remmgmt Also "iscsiadm -m session -r 0 -s" shows no sign of a problem How do I detect an error of the iscsi session within open-iscsi? Thanks for any help. Please find my config for that session below: --- # iscsiadm -m node -T iqn.2008-01.de.multinet.xen10:remmgmt -p 192.168.188.110 node.name = iqn.2008-01.de.multinet.xen10:remmgmt node.transport_name = tcp node.tpgt = 1 node.active_conn = 1 node.startup = manual node.session.initial_cmdsn = 0 node.session.auth.authmethod = None node.session.auth.username = remmgmt node.session.auth.password = ******** node.session.auth.username_in = <empty> node.session.auth.password_in = <empty> node.session.timeo.replacement_timeout = 30 node.session.err_timeo.abort_timeout = 10 node.session.err_timeo.reset_timeout = 30 node.session.iscsi.InitialR2T = No node.session.iscsi.ImmediateData = Yes node.session.iscsi.FirstBurstLength = 262144 node.session.iscsi.MaxBurstLength = 16776192 node.session.iscsi.DefaultTime2Retain = 20 node.session.iscsi.DefaultTime2Wait = 5 node.session.iscsi.MaxConnections = 0 node.session.iscsi.MaxOutstandingR2T = 1 node.session.iscsi.ERL = 0 node.conn[0].address = 192.168.188.110 node.conn[0].port = 3260 node.conn[0].startup = manual node.conn[0].tcp.window_size = 524288 node.conn[0].tcp.type_of_service = 0 node.conn[0].timeo.logout_timeout = 15 node.conn[0].timeo.login_timeout = 15 node.conn[0].timeo.auth_timeout = 45 node.conn[0].timeo.active_timeout = 5 node.conn[0].timeo.idle_timeout = 60 node.conn[0].timeo.ping_timeout = 5 node.conn[0].timeo.noop_out_interval = 10 node.conn[0].timeo.noop_out_timeout = 5 node.conn[0].iscsi.MaxRecvDataSegmentLength = 65536 node.conn[0].iscsi.HeaderDigest = None node.conn[0].iscsi.DataDigest = None node.conn[0].iscsi.IFMarker = No node.conn[0].iscsi.OFMarker = No -- Dr. Michael Schwartzkopff MultiNET Services GmbH Addresse: Bretonischer Ring 7; 85630 Grasbrunn; Germany Tel: +49 - 89 - 45 69 11 0 Fax: +49 - 89 - 45 69 11 21 mob: +49 - 174 - 343 28 75 mail: [EMAIL PROTECTED] web: www.multinet.de Sitz der Gesellschaft: 85630 Grasbrunn Registergericht: Amtsgericht München HRB 114375 Geschäftsführer: Günter Jurgeneit, Hubert Martens --- PGP Fingerprint: F919 3919 FF12 ED5A 2801 DEA6 AA77 57A4 EDD8 979B Skype: misch42 --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---