thanks a lot both!!! so, just as an FYI, it does not automatically refresh when I re-issue the "iscsiadm -m discovery, etc.... however when I opt to do with the "-o delete" option, it clears it in persistent cache ...
thanks again! - v. On Apr 14, 12:44 pm, Mike Christie <[EMAIL PROTECTED]> wrote: > v i n c e wrote: > > > > > Hello all, > > > I added edited my /etc/ietd.conf in my target and restarted - now it > > has a different target-lun exported; I try to stop and start my iscsi- > > initiator, and it is unable to "read" the NEW target, but seems like > > there is some log it is reading and persistently wants to load the old > > target-lun even after I stop'ed the iscsi service and ensured that the > > PIDs are gone: > > > service iscsi start > > iscsid dead but pid file exists > > Turning off network shutdown. Starting iSCSI daemon: [ OK ] > > [ OK ] > > Setting up iSCSI targets: Login session [iface: default, target: iqn. > > 2001-04.com.mylab:storage.disktest, portal: 192.168.17.1,3260] > > Login session [iface: default, target: iqn.2008-04.com.mylab:storage. > > 00A0D1E35826, portal: 192.168.17.3,3260] > > iscsiadm: initiator reported error (5 - encountered iSCSI login > > failure) > > iscsiadm: Could not log into all portals. Err 107. > > > ............... > > > Can someone please let me know where the log exists in the iscsi- > > initiator? or anyway to allow the initiator software to "refresh" and > > rediscover? > > When you do discovery the cache should get refreshed for you if you are > just adding and removing targets. So if you do > > - iscsiadm -m discovery ..... > - edit ietd.conf > - return iscsiadm -m discovery ... > - the new target should get discovered and the old one should be removed. > > If you are using the rc code then you can pass in -o new|delete|update > to control the behavior. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---