Mike Christie wrote: > Ken A wrote: >> Yes, thanks, turning off nops helped with some of the timeouts. The >> mkfs succeeded (very slowly), with this block of errors repeating >> in the log (see below). >> >> I should mention that this is on a asynchronous link, (100mbps >> initiator <-> 1000mbps target). The initiator is running Fedora 8, >> 2.6.25.6-27.fc8, open-iscsi 2.0-865. > > Are you using the tools and kernel modules from 2.0-865? Or the iscsi > kernel modules from 2.6.25.6-27.fc8 and tools from the rpm? > > If you did a make and make install with open-iscsi 2.0-865 from > open-iscsi.org then you are using the tools and kernel modules from > the open-iscsi.org. > > >> Target is Wasabi Storage Builder. >> >> Any ideas? > > > Is there anything on the target logs? > > With a 100 mbs link we might have been sending too much IO, but I > would have expected to see some messages about scsi commands timing > out and host resets firing. You can try setting these in iscsid.conf: > > > > node.session.cmds_max = 16 node.session.queue_depth = 8 >
Running open-iscsi from open-iscsi.org rather than iscsi-initiator-utils seems to have fixed the problem on one Initiator. Thanks very much for your help! Ken -- Ken Anderson Pacific.Net --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---