Hi Mike.
EMC does not have iser support on their arrays at this time.
Regards,
Wayne.
-----Original Message-----
From: open-iscsi@googlegroups.com [mailto:[EMAIL PROTECTED]
On Behalf Of Mike Christie
Sent: Thursday, November 06, 2008 12:22 PM
To: open-iscsi@googlegroups.com
Subject: Re: Connecting to an iSCSI target does not work on SuSE 10.3
Olaf Gellert wrote:
> Hi all,
>
> I installed openSuSE 11.0 (64bit) which uses open-iscsi 2.0.869)
> and it seems to work now. When I login, I get:
>
> # iscsiadm --mode node --targetname
> "iqn.1992-04.com.emc:cx.ck200083802139.a0" --portal 192.168.33.3:3260
> --login
> Logging in to [iface: default, target:
> iqn.1992-04.com.emc:cx.ck200083802139.a0, portal: 192.168.33.3,3260]
> Logging in to [iface: iser, target:
> iqn.1992-04.com.emc:cx.ck200083802139.a0, portal: 192.168.33.3,3260]
> Login to [iface: default, target:
> iqn.1992-04.com.emc:cx.ck200083802139.a0, portal: 192.168.33.3,3260]:
> successful
>
> Which looks great. After a few seconds follows:
>
> iscsiadm: Could not login to [iface: iser, target:
> iqn.1992-04.com.emc:cx.ck200083802139.a0, portal: 192.168.33.3,3260]:
> iscsiadm: initiator reported error (8 - connection timed out)
>
Does your EMC box have iser support? Are you or did you want to iser
(iscsi over infinniband) for this target?
I think the record for the "iface: iser" above might be getting created
by accident, because it seems to have the same ip as the other portal.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---
