Hi,
For a single connection session with ERL=0 and without FastAbort, if the
initiator has sent a lun reset task management function and the target
has sent a R2T, is it ok for the target to send a task management
response with Function Complete, before the initiator has sent the
data-out pdus for the R2T? It looks like the reason the target will do
this is due to a internal target timeout (target did not get the
data-outs within some timeout period).
If the target does return the task management function with Function
Complete, should the initiator continue to respond to the R2Ts?
And one other question. In section 10.5.1, we have:
The issuing initiator SHOULD however terminate (i.e., by setting the
F-bit to 1) these response sequences as quickly as possible.
Does this mean if we have sent a lun reset, and the target has sent a
R2T, should we be setting the F-bit in the continued data-out PDU so as
to end the transfer, even though actual data transfer has not been
completed entirely?
What if we do send all the data like normal, should that still be ok?
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---
