i do not want to use multipath as i have setup a HA iscsi target. 192.168.123.174 is the cluster ip
On Mar 9, 6:25 pm, aclhkaclhk aclhkaclhk <aclhkac...@gmail.com> wrote: > the bonding is 802.3ab. the bonding is functioning ok because i have > created a xen bridge over the bonding. the domu using the xen bridge > can connect to outside and vice versa > > bond0 -> xenbr1 -> domu -> outside hosts > > pls advise > > On Mar 9, 6:19 pm, aclhkaclhk aclhkaclhk <aclhkac...@gmail.com> wrote: > > > thanks, i could discover using bond0 but could not login. > > > iscsi-target (openfiler): eth0 (192.168.123.174) > > iscsi-initiator: eth0 (192.168.123.176), bond0-mode4 (192.168.123.178) > > > /var/lib/iscsi/ifaces/iface0 > > # BEGIN RECORD 2.0-871 > > iface.iscsi_ifacename = iface0 > > iface.net_ifacename = bond0 > > iface.transport_name = tcp > > # END RECORD > > > [r...@pc176 ifaces]# iscsiadm -m discovery -t st -p 192.168.123.174 > > -- > > interface iface0 > > 192.168.123.174:3260,1 192.168.123.174-vg0drbd-iscsi0 > > [r...@pc176 ifaces]# iscsiadm --mode node --targetname > > 192.168.123.174-vg0drbd-iscsi0 --portal 192.168.123.174:3260 --login > > -- > > interface iface0 > > Logging in to [iface: iface0, target: 192.168.123.174-vg0drbd-iscsi0, > > portal: 192.168.123.174,3260] > > iscsiadm: Could not login to [iface: iface0, target: 192.168.123.174- > > vg0drbd-iscsi0, portal: 192.168.123.174,3260]: > > iscsiadm: initiator reported error (8 - connection timed out) > > > i could use eth0 to discover and login > > > ping 192.168.123.174 from iscsi-initiator is ok > > ping 192.168.123.178 from iscsi-target is ok > > > 192.168.123.178 is authorised in iscsi-target to login > > > On Mar 8, 6:30 pm, Pasi Kärkkäinen <pa...@iki.fi> wrote: > > > > On Mon, Mar 08, 2010 at 02:08:43AM -0800, aclhkaclhk aclhkaclhk wrote: > > > > my server has eth0 (onboard), eth1 and eth2 (intel lan card). eth1 and > > > > eth2 are bonded as bond0 > > > > > i want to login iscsi target using bond0 instead of eth0. > > > > > iscsiadm --mode node --targetname 192.168.123.1-vg0drbd-iscsi0 -- > > > > portal 192.168.123.1:3260 --login --interface bond0 > > > > iscsiadm: Could not read iface info for bond0. > > > > > with interface, eth0 is used. > > > > > the bonding was setup correctly. it could be used by xen. > > > > You need to create the open-iscsi 'iface0' first, and bind it to 'bond0'. > > > Then you can login using 'iface0' interface. > > > > Like this (on the fly): > > > > # iscsiadm -m iface -I iface0 -o new > > > New interface iface0 added > > > > # iscsiadm -m iface -I iface0 --op=update -n iface.net_ifacename -v bond0 > > > iface0 updated. > > > > You can set up this permanently in /var/lib/iscsi/ifaces/ directory, > > > by creating a file called 'iface0' with this content: > > > > iface.iscsi_ifacename = iface0 > > > iface.transport_name = tcp > > > iface.net_ifacename = bond0 > > > > Hopefully that helps. > > > > -- Pasi > > -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-is...@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.