Hello,
Thank you for the work. This is my 1st post here.
Under a Debian OS, i try to acces by two different paths an Equallogic
PS 6000.
On the server i configured two NICs
eth1 Link encap:Ethernet HWaddr b8:ac:6f:12:38:c9
inet adr:192.168.15.11 Bcast:192.168.15.255 Masque:
255.255.255.0
eth2 Link encap:Ethernet HWaddr b8:ac:6f:12:38:cb
inet adr:192.168.15.12 Bcast:192.168.15.255 Masque:
255.255.255.0
On the same vlan than the SAN
First, the discovery works fine:
iscsiadm -m discovery -t st -I eth1 -I eth2 -p 192.168.15.1 -P 1 -o
delete -o new
Target: iqn.2001-05.com.equallogic:
0-8a0906-0dd652407-00e000e7b254c345-testdeb
Portal: 192.168.15.1:3260,1
Iface Name: eth2
Iface Name: eth1
With EQL, there is only one IP address for the portal, regardless of
how many times i have to access it.
I try to connect via the two nics:
First one:
#iscsiadm -m node --targetname iqn.2001-05.com.equallogic:
0-8a0906-0dd652407-00e000e7b254c345-testdeb -I eth1 --portal
192.168.15.1:3260,13 --login
Logging in to [iface: eth1, target: iqn.2001-05.com.equallogic:
0-8a0906-0dd652407-00e000e7b254c345-testdeb, portal:
192.168.15.1,3260]
Logging in to [iface: eth1, target: iqn.2001-05.com.equallogic:
0-8a0906-0dd652407-00e000e7b254c345-testdeb, portal:
192.168.15.1,3260]
Login to [iface: eth1, target: iqn.2001-05.com.equallogic:
0-8a0906-0dd652407-00e000e7b254c345-testdeb, portal:
192.168.15.1,3260]: successful
#
All is fine with the first one.
ls /dev/sdb
/dev/sdb
mount /dev/sdb /media/testDB/
Jul 9 00:42:10 sx1 kernel: [ 3318.053517] scsi 9:0:0:0: Direct-
Access EQLOGIC 100E-00 4.3 PQ: 0 ANSI: 5
Jul 9 00:42:10 sx1 kernel: [ 3318.057042] sd 9:0:0:0: [sdb] 209725440
512-byte hardware sectors (107379 MB)
Jul 9 00:42:10 sx1 kernel: [ 3318.057042] sd 9:0:0:0: [sdb] Write
Protect is off
Jul 9 00:42:10 sx1 kernel: [ 3318.057379] sd 9:0:0:0: [sdb] Write
cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jul 9 00:42:10 sx1 kernel: [ 3318.057734] sd 9:0:0:0: [sdb] 209725440
512-byte hardware sectors (107379 MB)
Jul 9 00:42:10 sx1 kernel: [ 3318.058035] sd 9:0:0:0: [sdb] Write
Protect is off
Jul 9 00:42:10 sx1 kernel: [ 3318.059480] sd 9:0:0:0: [sdb] Write
cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jul 9 00:42:10 sx1 kernel: [ 3318.059527] sdb: unknown partition
table
Jul 9 00:42:10 sx1 kernel: [ 3318.060635] sd 9:0:0:0: [sdb] Attached
SCSI disk
Jul 9 00:42:10 sx1 kernel: [ 3318.060686] sd 9:0:0:0: Attached scsi
generic sg3 type 0
Jul 9 00:43:51 sx1 kernel: [ 3419.896300] kjournald starting. Commit
interval 5 seconds
Jul 9 00:43:51 sx1 kernel: [ 3419.915116] EXT3 FS on sdb, internal
journal
Jul 9 00:43:51 sx1 kernel: [ 3419.915116] EXT3-fs: recovery complete.
Jul 9 00:43:51 sx1 kernel: [ 3419.915396] EXT3-fs: mounted filesystem
with ordered data mode.
With eth2,, nothing happens.
iscsiadm -m node --targetname iqn.2001-05.com.equallogic:
0-8a0906-0dd652407-00e000e7b254c345-testdeb -I eth2 --portal
192.168.15.1:3260,13 --login
Logging in to [iface: eth2, target: iqn.2001-05.com.equallogic:
0-8a0906-0dd652407-00e000e7b254c345-testdeb, portal:
192.168.15.1,3260]
Logging in to [iface: eth2, target: iqn.2001-05.com.equallogic:
0-8a0906-0dd652407-00e000e7b254c345-testdeb, portal:
192.168.15.1,3260]
iscsiadm: Could not login to [iface: eth2, target: iqn.
2001-05.com.equallogic:0-8a0906-0dd652407-00e000e7b254c345-testdeb,
portal: 192.168.15.1,3260]:
iscsiadm: initiator reported error (8 - connection timed out)
I don't have any log line
Is anyone an idea of what could happen ?
Thank you very much, i am stuck
--
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/open-iscsi?hl=en.
