On 08/02/2010 02:42 PM, Jansen, Frank wrote:
Hi,
(Sorry about the incomplete message due to my fat fingers)
I've searched through archives and lots of places, but have had no
success in finding the answer to the following conundrum:
- I set up 2 scsi targets using tgtd provided in scsi-target-utils and
put them on separate control-ports, so that I can keep backing-store
organized. The two instances of tgtd are listening on ports 3260 and
3261 resp. There are 4 LUNs on each target, which show up as being
ready.
- when I do discovery on the initiator node, I succeed in performing the
discovery on the portal with port 3260, and logins succeed. Discovery
on the port 3261 portal appears to succeed, but when I try logins they
fail with the following:
Logging in to [iface: default, target:
iqn.2001-04.com.crossbeamsys:dut.target2, portal: 10.10.10.201,3261]
iscsiadm: Could not login to [iface: default, target:
iqn.2001-04.com.crossbeamsys:dut.target2, portal: 10.10.10.201,3261]:
iscsiadm: initiator reported error (4 - encountered connection failure)
What version of open-iscsi are you using? There was a bug there the non
default port would not get logged into in some test/rc releases.
Also check out /var/log/messages for messages from iscsid. Something
about a connection failing to connect. Send the log.
netstat -an shows the listeners
[r...@dut var]# netstat -an|grep 326
tcp 0 0 10.10.10.201:3260 0.0.0.0:*
LISTEN
tcp 0 0 10.10.10.201:3261 0.0.0.0:*
LISTEN
tcp 0 0 10.10.10.201:3260 10.10.10.200:40415
ESTABLISHED
Any thoughts on what I am missing here?
Thanks,
Frank
--
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/open-iscsi?hl=en.
