On Nov 6, 2012, at 9:54 AM, [email protected] wrote: > [root@holly ~]# iscsiadm -m node -p 172.16.50.1 -T > iqn.2001-05.com.equallogic:0-8a0906-172228806-45a001b4e1a50980-workflow-software-6 > --login > Logging in to [iface: eth1, target: > iqn.2001-05.com.equallogic:0-8a0906-172228806-45a001b4e1a50980-workflow-software-6, > portal: 172.16.50.1,3260] (multiple) > iscsiadm: Could not login to [iface: eth1, target: > iqn.2001-05.com.equallogic:0-8a0906-172228806-45a001b4e1a50980-workflow-software-6, > portal: 172.16.50.1,3260]. > iscsiadm: initiator reported error (8 - connection timed out) > iscsiadm: Could not log into all portals > > [root@holly ~]# tail /var/log/messages > Nov 6 10:21:22 holly kernel: session55: session recovery timed out after 120 > secs > Nov 6 10:21:26 holly iscsid: semop down failed 22 > Nov 6 10:25:05 holly kernel: scsi64 : iSCSI Initiator over TCP/IP > Nov 6 10:25:14 holly kernel: connection56:0: detected conn error (1020) > Nov 6 10:25:42 holly kernel: connection56:0: detected conn error (1020) > Nov 6 10:26:09 holly kernel: connection56:0: detected conn error (1020) > Nov 6 10:26:36 holly kernel: connection56:0: detected conn error (1020) > Nov 6 10:27:03 holly kernel: connection56:0: detected conn error (1020) > Nov 6 10:27:15 holly kernel: session56: session recovery timed out after 120 > secs > Nov 6 10:27:19 holly iscsid: semop down failed 22
So are some sessions getting setup ok and some are not? Could you send all of the /var/log/messages? When you see the 1020 errors above, what is in the target's log? Did you try changing the rp_filter value? See the iscsi README and your kernel documentation. -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
