I managed to resolve this issue. It turns out the subnet mask was incorrect on eth1 and the equallogic discover IP is different from it's transfer IP so it would not connect.
Thanks for taking the time to look at it. On Wednesday, November 7, 2012 4:49:19 AM UTC-5, Mike Christie wrote: > > > On Nov 6, 2012, at 9:54 AM, [email protected] <javascript:> wrote: > > [root@holly ~]# iscsiadm -m node -p 172.16.50.1 -T > iqn.2001-05.com.equallogic:0-8a0906-172228806-45a001b4e1a50980-workflow-software-6 > > --login > > Logging in to [iface: eth1, target: > iqn.2001-05.com.equallogic:0-8a0906-172228806-45a001b4e1a50980-workflow-software-6, > > portal: 172.16.50.1,3260] (multiple) > > iscsiadm: Could not login to [iface: eth1, target: > iqn.2001-05.com.equallogic:0-8a0906-172228806-45a001b4e1a50980-workflow-software-6, > > portal: 172.16.50.1,3260]. > > iscsiadm: initiator reported error (8 - connection timed out) > > iscsiadm: Could not log into all portals > > > > [root@holly ~]# tail /var/log/messages > > Nov 6 10:21:22 holly kernel: session55: session recovery timed out > after 120 secs > > Nov 6 10:21:26 holly iscsid: semop down failed 22 > > Nov 6 10:25:05 holly kernel: scsi64 : iSCSI Initiator over TCP/IP > > Nov 6 10:25:14 holly kernel: connection56:0: detected conn error (1020) > > Nov 6 10:25:42 holly kernel: connection56:0: detected conn error (1020) > > Nov 6 10:26:09 holly kernel: connection56:0: detected conn error (1020) > > Nov 6 10:26:36 holly kernel: connection56:0: detected conn error (1020) > > Nov 6 10:27:03 holly kernel: connection56:0: detected conn error (1020) > > Nov 6 10:27:15 holly kernel: session56: session recovery timed out > after 120 secs > > Nov 6 10:27:19 holly iscsid: semop down failed 22 > > So are some sessions getting setup ok and some are not? > > Could you send all of the /var/log/messages? > > When you see the 1020 errors above, what is in the target's log? > > Did you try changing the rp_filter value? See the iscsi README and your > kernel documentation. -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To view this discussion on the web visit https://groups.google.com/d/msg/open-iscsi/-/aJh4lrm2pJAJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
