I have Segate Blackarmor 440 4x2TB HD in raid 5 i create ISCSI device 5493 GB 0 Full Access service iscsi start
iscsiadm -m discovery -t st -p 192.168.0.2 fdisk -l no see new disk dmesg scsi5 : iSCSI Initiator over TCP/IP scsi 5:0:0:0: Direct-Access SCST_FIO BZ 200 PQ: 0 ANSI: 5 sd 5:0:0:0: Attached scsi generic sg1 type 0 sd 5:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B) sd 5:0:0:0: [sdb] 4096-byte physical blocks sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: 83 00 10 08 sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 5:0:0:0: [sdb] Attached SCSI disk [root@localhost ~]# sg_readcap --16 /dev/sdb Read Capacity results: Protection: prot_en=0, p_type=0, p_i_exponent=0 Thin provisioning: tpe=0, tprz=0 Last logical block address=18446744073709551615 (0xffffffffffffffff), Number of logical blocks=0 Logical block length=512 bytes Logical blocks per physical block exponent=3 Lowest aligned logical block address=0 Hence: Device size: 0 bytes, 0.0 MiB, 0.00 GB [root@localhost ~]# sg_readcap --pmi /dev/sdb READ CAPACITY (10) indicates device capacity too large now trying 16 byte cdb variant Read Capacity results: Protection: prot_en=0, p_type=0, p_i_exponent=0 Thin provisioning: tpe=0, tprz=0 PMI mode: given lba=0x0, last lba before delay=0xffffffffffffffff Logical block length=512 bytes Logical blocks per physical block exponent=3 Lowest aligned logical block address=0 any help ? If i creat iscsi device little 2TB .. i can join in Centos ..not any problem iscsi initiator last version -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To view this discussion on the web visit https://groups.google.com/d/msg/open-iscsi/-/GFxIhSKU2WMJ. To post to this group, send email to open-iscsi@googlegroups.com. To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
