Yes, already sent a follow-up earlier saying I read it wrong. -Anish > -----Original Message----- > From: open-iscsi@googlegroups.com [mailto:open-iscsi@googlegroups.com] > On Behalf Of Paul Koning > Sent: Thursday, July 31, 2014 12:21 PM > To: open-iscsi@googlegroups.com > Subject: Re: Getting log "Login authentication failed with target .." during > login-redirect > > No, that's incorrect. > > You're assuming that the coding of the lower byte in the 16-bit response is a > single global code space independent of the upper byte. > > That is not how the RFC is written. Instead, the entire 16 bit value is the > code, and you must interpret it as a unit. This is completely clear from the > table of codes in the RFC: 0201 is error, authentication failure. But 0101 is > "target moved temporarily". It is not authentication failure and has nothing > to do with authentication failure. (Indeed, it isn't even the case that > authentication has been done at all when the 0101 response is generated; > the RFC clearly states that it may be issued prior to completion of > authentication.) > > paul > > On Jul 31, 2014, at 3:16 PM, Anish Bhatt <an...@chelsio.com> wrote: > > > 0101 implies you're getting a status class of 0x1 & status detail of 0x1 > > > > #define ISCSI_STATUS_CLS_REDIRECT 0x01 > > #define ISCSI_LOGIN_STATUS_AUTH_FAILED 0x01 > > > > You are getting redirect as well as auth failed, hence. > > -Anish > > ________________________________ > > From: open-iscsi@googlegroups.com [open-iscsi@googlegroups.com] on > behalf of KUMAR NITISH [csnitish...@gmail.com] > > Sent: Tuesday, July 29, 2014 11:19 PM > > To: open-iscsi@googlegroups.com > > Subject: Getting log "Login authentication failed with target .." during > > login- > redirect > > > > Hi all, > > > > I am using Dell EqualLogic array as target. When I make session with this > target, I am getting logs as given below : > > > > login response status 0101 > > Login authentication failed with target iqn.2001-05.com.equallogic:0- > 8a0906-964f1f903-d850018d2a253d5f-nitishk521 > > ... > > .. > > login response status 0000 > > Login Success: iqn.2001-05.com.equallogic:0-8a0906-964f1f903- > d850018d2a253d5f-nitishk521 if=default addr=10.115.178.29:3260 (TPGT:1 > ISID:0x1) > > > > > > Since "login response status 0101" is for "iscsi login-redirect" , so why " > Login authentication failed with target " message is coming..? > > I think It's a bug and It should show the proper log message. > > > > > > Thanks, > > Nitish > > > > -- > > You received this message because you are subscribed to the Google > Groups "open-iscsi" group. > > To unsubscribe from this group and stop receiving emails from it, send an > email to open-iscsi+unsubscr...@googlegroups.com<mailto:open- > iscsi+unsubscr...@googlegroups.com>. > > To post to this group, send email to open- > is...@googlegroups.com<mailto:open-iscsi@googlegroups.com>. > > Visit this group at http://groups.google.com/group/open-iscsi. > > For more options, visit https://groups.google.com/d/optout. > > > > -- > > You received this message because you are subscribed to the Google > Groups "open-iscsi" group. > > To unsubscribe from this group and stop receiving emails from it, send an > email to open-iscsi+unsubscr...@googlegroups.com. > > To post to this group, send email to open-iscsi@googlegroups.com. > > Visit this group at http://groups.google.com/group/open-iscsi. > > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "open-iscsi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to open-iscsi+unsubscr...@googlegroups.com. > To post to this group, send email to open-iscsi@googlegroups.com. > Visit this group at http://groups.google.com/group/open-iscsi. > For more options, visit https://groups.google.com/d/optout.
-- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to open-iscsi+unsubscr...@googlegroups.com. To post to this group, send email to open-iscsi@googlegroups.com. Visit this group at http://groups.google.com/group/open-iscsi. For more options, visit https://groups.google.com/d/optout.