What are you using for an iSCSI target?   IETD doesn't support tape drives.


Try STGT  http://stgt.sourceforge.net/

They claim to support VTL.  I haven't tried it myself.   I believe there
are one or two other Linux iSCSI targets that support tape drives as well.

Regards,
Don


On Thu, Sep 11, 2014 at 2:38 PM, Kelley, Jared <jkel...@popcap.com> wrote:

>  I’m trying to setup a VTL on some AWS EC2 instances and have done so
> with success however the scsi devices (virtual tape drives)
> show up as connected to the client but there is nothing listed under
> /dev/st* nor is there any /dev/by-path directory on the client.
>
>  Has anyone experienced this and what might be the issue?
>
>  Thanks in advance
>
>  Jk
>
> --
> You received this message because you are subscribed to the Google Groups
> "open-iscsi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to open-iscsi+unsubscr...@googlegroups.com.
> To post to this group, send email to open-iscsi@googlegroups.com.
> Visit this group at http://groups.google.com/group/open-iscsi.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to open-iscsi+unsubscr...@googlegroups.com.
To post to this group, send email to open-iscsi@googlegroups.com.
Visit this group at http://groups.google.com/group/open-iscsi.
For more options, visit https://groups.google.com/d/optout.

Reply via email to