Than you should at least tune your iscsi.conf to fit the eql requirements. I sent a working config from one of our Systems (but keep in mind this is multiple Gbit, not 10G).
You can take the Manual for Citrix Xenserver Multipathing + Eql to get a Direction how it should look like since its using open-iscsi, too. http://en.community.dell.com/techcenter/extras/m/white_papers/20438058 Dont forget to check/set the NIC Settings ... regarding the HP Switch i am out, we where into EQL + Cisco 3750 and had lots of trouble until we replaced them with recommended Powerconnects. Am 02.12.2014 um 16:43 schrieb Stefan B: > We can not hit kit installed thats is correct, the system are not > support get i back from the installer. > > We use the fowling switchs > > Dell Bladecenter we use the Dell PowerEdge M I/O Aggregator connect with > 10Gbit to HP Procruve 3800 switchs and then connected to the 1Gbit > Equallogic's. > > Sometime its takes more than 30 / 45 seconds to get the data back, and > the sql and webserver are waiting on this, are the some setting whate > can give this problem ? > > On Tuesday, December 2, 2014 3:22:22 PM UTC+1, Stefan B wrote: > > We have 2 Equallogic Systems, And a Dell Servers. > > We have every server give a block device home dir , so the user data > are on the home dir this is working great its format on xfs > filesystem, and running iscsiadm version 2.0-870 with linux kernel > 3.10.57 > > But when we logging on the server, the first time we do a dir > command on the home dir, its take a long time when we get feedback > on the dir , the next time is fast when we do a dir. > Now we have users on this systems and this problem give not good > performance on sql and websites an e-mail we are running on the server. > > Are the some information how i can fix ore maybe get this problem > better under control ? > > I hope so that somebody can help me, i am searching for more than 3 > weeks now. > > -- > You received this message because you are subscribed to the Google > Groups "open-iscsi" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] > <mailto:[email protected]>. > To post to this group, send email to [email protected] > <mailto:[email protected]>. > Visit this group at http://groups.google.com/group/open-iscsi. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/open-iscsi. For more options, visit https://groups.google.com/d/optout.
