Hello All, I'm seeing these messages in my messages log, as well as experiencing corosync problems around the same time. I have searched high and low for information on this error code and have found very little.
>From /var/log/messages: iscsid: Kernel reported iSCSI connection 1:0 error (1022 - Invalid or unknown error code) state (3) iscsid: connection1:0 is operational after recovery (1 attempts) iscsid: Kernel reported iSCSI connection 1:0 error (1022 - Invalid or unknown error code) state (3) iscsid: connection1:0 is operational after recovery (1 attempts) The system is CentOS 7.2, running iscsi-initiator-utils-6.2.0.873-32. I'm connecting to a QNAP TurboNAS 869 as the target. The target isn't logging any sort of error messages that can help in the debugging of the issue. I did have Jumbo Frames enabled on the switch and set MTU to 9000 on the initiators and the target, but set everything back to 1500 after problems began with no discernible effect. If anyone could provide some insight as to why I'm seeing those messages and how to correct the problem, I would appreciate it greatly. Thank you for your time. Regards, David A. Buechler System Administrator CableAmerica Missouri LLC -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/open-iscsi. For more options, visit https://groups.google.com/d/optout.
