Hi all, I have a question regarding udev events when using iscsi disks. By using "udevadm monitor" I can see that events are generated when I login and logout from an iscsi portal/resource, creating/destroying the relative links under /dev/
However, I can not see anything when the remote machine simple dies/reboots/disconnects: while "dmesg" shows the iscsi timeout expiring, I don't see anything about a removed disk (and the links under /dev/ remains unaltered, indeed). At the same time, when the remote machine and disk become available again, no reconnection events happen. I read a quite old thread here <https://groups.google.com/d/msg/open-iscsi/uN0jFsT1TI8/KD7rEHhrO5sJ> were it was stated that a patch to better integrate iscsi with udev events was in progress. Did something changed/happened during these years? Is the behavior I observed (and described above) to be expected? Thanks. -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/open-iscsi/efc571ca-92db-4f58-a8a5-cff9a33dee98%40googlegroups.com.
